Reviews Water Pressure Solenoid Valve

mistcooling 250 PSI Misting Pump

  • ...e – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on....
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • Professional Factory - We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • High Capacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • Complete Accessories - steel bottle, Stainless steel pressure reducing....
Check Stock

Wyin 4L Aquarium Co2 Generator System with Single Gauge Display Pressure Gauge, DIY Co2 Generator System Kit, Automatic Pressure…

  • ...ne-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
  • 【Safety Protection】 The Wyin co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve makes you away from the danger of solenoid valve leakage and protects your safety. The u-shaped pipe connecting the air pipe is equipped with a one-way valve to prevent water backflow.
  • 【Fine the Bubbles】 Wyin CO2 generator system is equipped with an atomizer to refine the bubbles so that they can be easily dissolved in water and absorbed by plants, keeping your aquarium full of life. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • 【What's in The Box?】 The box you receive will come with a cylinder, stainless steel pressure-reducing valve, filter, bubble counter, solenoid valve, solenoid valve pow....
Check Stock

ZRDR 4L Co2 Generator System with Dual Gauge Display Pressure Gauge,DIY Co2 Generator System Kit, Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium, Stable Output

  • 【Professional Factory & Peace of Mind After-Sales】 We are a manufacturer specializing in CO2 generator systems. Our co2 generator system is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high-pressure resistant. We have a professional after-sales group, you can contact us at any time if you have any problems with the products you buy, and we will give you a satisfactory solution.
  • 【New upgrade bubble counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
  • 【Safety protection】 The zrdr co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve, make y....
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

Fankerba Normally Open Pressure Solenoid Water Valve for Water Air - DC 12V 1/2 / Pure Copper Coils

  • This is pressure solenoid valve:it is suitable for tap water supply..
  • This is normally open solenoid valve:water will be supplied without electricity, and the solenoid valve will not work after power is turned on..
  • It is 67.7mm/2.67 inch length between the two joints.
  • it is 69mm/2.7 inch height between the up and down..
  • The valve body is plastic and the joint is copper.
Check Stock

Beduan 2 Way Normally Closed DC 12V Electric Solenoid Air Valve 1/8\ NPT

  • 【Service Media/Material】 Air, Gas, Liquid, Water./ Anodized Aluminum.
  • 【Port Coil Voltage】 12V Port size: 1/8" Female inlet/outlet port..
  • 【Temperature/ Pressure Range】 23-176°F, Pressure Range:115 PSI..
  • 【Selenoid Valve Type】 2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing..
  • 【Feature】This solenoid water valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
Check Stock

ZRDR CO2 Generator System Carbon Dioxide 2L with Dual Gauge Display Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium Stable Output

  • PROFESSIONAL FACTORY - We are a manufacturer specializing in CO2 generator system. Our CO2 generator system is made of 304 stainless steel, far better....
  • SAFE PROTECT - Automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V....
  • REFINE THE BUBBLES - OUR CO2 generator system equipped with the atomizer, refine the bubbles and make it easy to dissolve in water and be absorbed by....
  • LOW COST - Generates CO2 on your own: you only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the....
  • COMPLETE ACCESSORIES - steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply,....
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve for Aquarium Plants Tanks

  • PROFESSIONAL! Professional CO2 generator system with SUS304 stainless steel bottle, regulator, bubble counter, safety valve. Far better than simple plastic bottle generators: more reliable, steady, durable, efficient..
  • SAFE! The bottle body adopts 1.5mm thickness SUS304 stainless steel(more 25% thickness than normal 1.2mm), blasting pressure up to >80kg/cm2(1137PSI), Safety valve will open automatically when it exceeds the safe pressure..
  • NEEDLE VALVE WITH BUBBLE COUNTER! Together with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter with check valve function, stop water backflow to bottle. Aquarium specific needle valve, High precision fine-tuning easy for co2 to be 1 bubble in 3 seconds..
  • OPTIONAL MINI DC 12V SOLENOID! You can choose a 12V DC solenoid valve with the generator, will automatic turning on/off CO2 output with timer..
  • ATTENTIONS: Solenoid NOT included, need order seperately..
Check Stock

Aquarium Choice 6 Pieces CO2 DIY Reactor Bottle Cap Fish Tank DIY Quick Twist co2 Bottle Cap with 118 INCH Long Hoses

  • 【Support MORE raw materials】2.3L capacity and thickened wall cylinder, supporting 400g citric acid + 400g baking soda + 600ml water. Other....
  • 【304 stainless steel】Corrosion and high pressure resistant 304 stainless steel cylinder with a pressure load of 180kg/cm² (2560 psi). Safer to....
  • 【High quality solenoid valve】The bubble counter is integrated with the solenoid valve and has a built-in check valve. And the solenoid bubble....
  • 【Attention】This set contains almost all the necessary accessories, only the reaction raw materials need to be prepared by yourself..
  • 【Most parts are replaceable】Quality inspection one by one, rather than random inspection! We are serious about quality control and buyer....
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator Mini DC Solenid and Diffuser for Aquarium Plants Tanks

  • PROFESSIONAL FULL CO2 DIY KIT! A complete system in 2.5L size bottle, that includes SUS304 stainless bottle, regulator, Mini DC solenoid, precision needle valve, CO2 Tubing, CO2 Diffuser and easy adjustable bubble counter.
  • SAFE! The bottle body is made of 1.5mm thick SUS304 stainless steel (25% thicker than normal 1.2mm bottle). It can sustain pressure up to 80kg/cm2(or 1137 PSI). Safety valve will open automatically when the inside pressure exceeds the safety threshold.
  • NEEDLE VALVE WITH BUBBLE COUNTER! High precision, aquarium specific needle valve provides accurate fine-tuning. Steady 1 bps is achievable. Bubble counter with check valve built-in. It stops water from back flowing into your CO2 tank (protects your CO2 tanks from rust and corrosion).
  • 12V DC SOLENOID INCLUDED! Having the solenoid on a timer, you can specify when you want CO2 injection ON and for how long.
  • ATTENTIONS: Citric acid and sodium bicarbonate NOT included.
Check Stock

uxcell Pulse Solenoid Valve G1/2 DC3.6V Copper Male Thread Valves with Filter

  • This solenoid valve is basic automated components that electromagnetically control fluids..
  • Flow Direction: Unidirectional (Follow the Arrow on Valve Body).
  • Solenoid type magnetic field makes the valve reach higher pressure, which greatly improves the flow of the passed medium..
  • Replacement solenoid valve for induction fittings. Replace the bad work solenoid valve for machine..
Check Stock

AOMAG® 1/8\ NPT DC 12V Electric Solenoid Valve 2 Way Water Air Valve Normally Closed

  • 【Service Media】: Air, Gas, Liquid, Water 【Material】Anodized Aluminum.
  • 【Valve Type】2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing..
  • 【Port Coil Voltage】 12V Port size: 1/8" Female..
  • 【Temperature Range】 23-176°F , Pressure Range : 115 PSI.
  • 【Feature】This solenoid valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
Check Stock