Reviews Water Line Regulator

1/2 NPT MID FLOW Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Poly Bowls Great For Paint Spray And Plasma Cutter MANUAL DRAIN

  • PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (MANUAL DRAIN) STAGE 1.
  • 150 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
  • STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 150 PSI. 5oz Poly Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Poly Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccan....
Check Stock

3 STAGE, HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES, METAL BOWLS, GREAT FOR PAINT SPRAY AND PLASMA CUTTER (1/2\ NPT, MANUAL DRAIN)

  • 1/2" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND MANUAL DRAIN STAGE 1.
  • 225 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
  • STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 215 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
  • STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
  • STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. COMES WITH 2 BAGS OF DESICCANT BEADS..
Check Stock

3 STAGE HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES METAL BOWLS GREAT FOR PAINT SPRAY AND PLASMA CUTTER 1/2 NPT AUTO DRAIN

  • 1/2" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1.
  • 175 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
  • STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 175 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
  • STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
  • STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. UNIT COMES WITH 2 BAGS DESICCANT BEADS..
Check Stock

3 STAGE HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES METAL BOWLS GREAT FOR PAINT SPRAY AND PLASMA CUTTER 3/4 NPT AUTO DRAIN

  • 3/4" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1.
  • 175 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
  • STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 175 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
  • STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
  • STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. UNIT COMES WITH 2 BAGS DESICCANT BEADS..
Check Stock

3/4 NPT SUPER DUTY Industrial Grade 4 Stages Filter Coalescing Desiccant Dryer Regulator System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

  • PLEASE NOTE: 3/4" NPT MEASURES 1.050" OUTSIDE THREAD DIAMETER IN INCHES. 3/4" NPT, Industrial Rated 4 Stage Combo Water Filter/ Coalescing Filter/ Desiccant Dryer/ Pressure Regulator System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
  • 175 PSI Max Input. This Unit Will Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer, Then Finally Regulator Your Outgoing Air Pressure.
  • STAGE 1: Water Trap Filter. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads. STAGE4: Pressure Regulator, Regulator Adjusts Output Pressure From 7 To 175 PSI..
Check Stock

1/2 NPT HEAVY DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

  • PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
  • 175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
  • STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 5oz Metal Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Metal Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccan....
Check Stock

SharkBite 3/4 Inch EB45 Double Union Pressure Regulating Valve (PRV), Push to Connect Brass Plumbing Fittings, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 23894-0045

  • Made of water-safe materials, mostly lead-free brass, this RV water pressure regulator attaches to the main water line and lets the water run through it at a controlled rate, which changes the water pressure. You can set this water pressure to whichever PSI you would like by using a flat screwdriver to turn the valve..
  • This water pressure regulator works in temperatures up to 60°C and, because of the sturdy construction, is durable and meant to last..
  • This RV water pressure regulator comes with a PSI gauge that measures from 0-160 PSI. The thread on the gauge is ½” and the numbers on the gauge are easy to read, with marks every 2 PSI as well as the main marks every 20 PSI..
Check Stock

SKYTOU Dual Gauge CO2 Regulator, Keg Beer Regulator CGA-320 Inlet for Draft Beer Homebrew Kegerator Dispensing Regulator

  • ❤【Double Gauge】: The top gauge (0-60psi) of this CO2 regulator shows you how much pressure is being provided to the kegs, the side gauge(0-3000psi) of this CO2 regulator shows you how much CO2 is left in your cylinder/tank..
  • ❤【Compatible & Safe】: This CO2 regulator works with any CO2 tank with a CGA-320 valve. It comes with a CGA-320 Female thread and a shut off valve allows you to turn the gas flow on / off and prevents liquid from backing into the regulator..
  • ❤【Premium Material】: The Draft Beer Dispensing CO2 Regulator adopts to food grade high-strength copper chrome decompression material and sturdy rubber boots that help protect them from damage. And Inside Safety Pressure Relief Valve springs also have high fatigue strength and durability..
  • ❤【Easy To Install】: Slap this CO2 regulator on a food grade CO2 tank, connect a gas line ( ID 5/16' or 3/8”) and carbonator, and you have a lot cheaper carbonated water than buying carbonated water bottles directly..
  • ❤【Suitable Occasions】: Particularly suitable in a Shop,Bar,Home,Out Door,Plants etc.....
Check Stock

Soda Blaster, Oil Water Separator, Digital Air Regulator

  • Achieve reliable and safe sandblasting operation with gravity-feed sandblaster gun. With an oil water separator and swivel connector, this bundle is is sure to complement any workspace..
  • The AS118 Soda Blaster gives you a clean finish that's fast and easy. This powerful blaster removes paint, rust, grease, and much more. Use it on cars, trucks, farm equipment and tools - or simply give your grill a good cleaning. Steel Nozzle Allows Precise Blasting- With a range of 90-150 PSI..
  • Filter oil, water and dirt from the air line with ZN312E-3 1/4" Water Separator air compressor filter, featuring color changing desiccant to notify you when it's time to change out the desiccant beads..
  • Quickly and Accurately Adjust air flow with the LE LEMATEC Air Pressure Regulator with an easy to read display for faster adjustments. The DAR01B gives you both and a replaceable battery so you never have to replace the regulator..
  • Installation: To connect the sandblaster, oil water separator and air regulator, use a male-to-male adaptor (not included and sold separately) from our Le Lematec LE-CU15K Air Fittings kit..
Check Stock

Senninger Pressure Regulator 25 PSI 3/4 Hose Thread Drip Irrigation Pressure Reducer Low Flow Valve - Landscape Grade High Performance

  • Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 3/4″ outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system..
  • 100% water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance..
  • Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance..
  • This PRLG (Pressure Regulator Landscape Grade) maintains a constant outlet pressure of 25 PSI (1.72 bar) with a flow range between 0.5 – 7 GPM (114 – 1590 L/hr)..
  • Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation..
Check Stock

SUPER HEAVY DUTY HIGH FLOW AIR FILTRATION SYSTEM, 2 STAGE PARTICULATE FILTER PLUS OIL REMOVING COALESCING FILTER COMBINATION (1" NPT, AUTO DRAIN)

  • 1" NPT, HEAVY DUTY INDUSTRIAL GRADE AIR FILTRATION AND IN-LINE AIR DRYER COMBINATION WITH PRESSURE REGULATOR. WITH INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1..
  • 175 PSI MAX INPUT PRESSURE, EQUIPPED WITH 11oz METAL BOWLS, VISIBLE SIGHT GLASSES, PRESSURE GAUGE, WALL MOUNTING BRACKET AND 4 BAGS OF DESICCANT BEADS.
  • STAGE 1: PARTICULATE FILTER/WATER TRAP WITH PRESSURE REGULATOR. 5 MICRON ELEMENT REMOVES 95% OF MOISTURE AND DEBRIS, REGULATOR WILL ADJUST PRESSURE FROM 7 TO 175 PSI.
  • STAGE 2: COALESCING / OIL REMOVING FILTER, EQUIPPED WITH 0.01 MICRON ELEMENT WILL REMOVE 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST STAGE 1..
  • STAGE 3: IN-LINE DESICCANT AIR DRYER WILL DRY OUT THE OUTGOING COMPRESSED AIR LINES BEFORE REACHING YOUR PNEUMATIC TOOLS, BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE..
Check Stock

PERA 5/16" ball lock line assembly, MFL liquid disconnect with 5ft gas line for home brewing

  • INCLUDES: MFL ball lock disconnect, 2 pcs swivel nut, 2 pcs hose clamp, 5ft ID 5/16″ OD 9/16″ gas line.
  • PRE-ASSEMBLED, can connect gas regulator directly once you get the ball lock gas line.
  • NO LEAK, with two pcs hose clamp, will have no gas leak problem.
  • MULTI-USAGE, carbonated seltzer water, home brew, different beverage, outdoor picnics, keg cleaning.
  • WORK WITH ALL STANDARD REGULATOR, with swivel nut, connect MFL regulators, Remove swivel nut for barb regulators.
Check Stock

MRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks

  • 1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
  • 2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
  • Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
  • 4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
  • 5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..
Check Stock