Reviews Wanhao Duplicator 7

Kweiny MK10 Heater Block 2PCS for 3D Printer Hotend Improved Version Fit with M3 and M4 Thermistor

• Compatibility: Fit with MK10 hotend M7 thread nozzle and throat, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
• Improved Version: According to customer feedback, a M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor.
• Quantity and specification: 2 pieces MK10 aluminum heater block, For detailed dimensions, please refer to the drawings in the upper left.

Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

• 100% Brand New and All parts are tested and quality controlled prior to shipment..
• Compatible with: MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
• Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle..
• Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
• Package includes: 1 piece 0.4mm nozzle with M7 thread,1 piece throat with 1.75mm PTFE tube , 1 piece aluminum heater block as shown in the pictures..

MK10 3D Printer Extruders Kit 5 Pcs Aluminum Heater Block + 1.75mm Extruder Throat Tube M7 Thread + Cotton Heater Tape for 3D Printer Wanhao Filament

• ✹✹ High quality copper and stainless steel, ensure concentricity and roundness.
• Designed for many common types of 3D printers, solid aluminium construction with aperture..
• ✹✹ Aluminium Heater Block for Extruders in 3D-Printers. A drilling with an M4 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M4 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M7 thread for the Nozzle..
• ✹✹ Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc..
• ✹✹ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better..
• ✹✹ Any questions, you can tell us and we will give you a satisfied solution!.

YuenPau MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

• Compatibility: Fit with MK10 hotend aluminum cooling block, such as FlashForge Creator Pro \ Creator X \ Dreamer \ finder \ inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S \ Duplicator 4X \ Duplicator i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
• Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece..
• Brass material advantage: The heat conductivity of brass is is several times that of stainless steel and hardened steel, It is the most suitable material for extruder nozzle to ensure accurate print temperature..
• Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
• Improved Version: An M3 thread hole has been added on the aluminum block to making it suitable for both M3 and M4 thermistor.

Zamtac 1 pcs Wanhao Duplicator i3 Plus Cartridge Heater Tube Heater Cartridge Style Heater Tube for Wanhao Duplicator

Micro Swiss All Metal Hotend with Slotted Cooling Block for Duplicator 6 / Monoprice Maker Ultimate 3D Printer .4mm

• Fits: Wanhao Duplicator 6 / Monoprice Maker Ultimate 3D Printer.
• No set screw to ding and damage thermal tube.

BIQU Flexible Removable PEI Steel Sheet Heated Bed with Magnetic Sticker 220x220mm, Build Surface Platform for Anet A8 Robo R2 Anet A8 A6, Robo R2, Wanhao Duplicator6, Wanhao i3 3D Printer

• Suitable for Anet A8 Robo R2 Anet A8 A6, Robo R2, Wanhao Duplicator6, Wanhao i3 3D Printer Original Removable PEI Steel Sheet Heated Bed..
• Heated bed Platform: Easy to Use and Flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take..
• Magnetic Sticker:The build surface has an upper magnetic build surface and a lower magnetic adhesive base. Place the 3M lower adhesive surface on a common construction board..
• High temperature resistance: Withstand temperature above 200 ℃..
• After-sales support: If you encounter any problems, please write us via Amazon-Email. We are happy to answer all your questions..

GO-3D PRINT 220mm x 220mm Borosilicate Glass Plate/Bed w/Corner Cut for Wanhao i3 Anet A8 MP Maker Select 3D Printer

• To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass..
• Good fit Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers.

3D Printer Glass Bed Upgraded, Borosilicate Glass Plate w/Corners Cut for Monoprice Maker Select V2 Anet A8/A6 Wanhao Duplicator i3 220x220x3mm with4 Glass Clips

• 【Borosilicate Glass】 High binding power when heating. Easy to separate the plastic parts when cooling..
• 【Size】 220mm x 220mm x 3mm.Compatble with Maker Select V2, Wanhao Duplicator, Anet A8, Anet A6 and other 3D Printers..
• 【Safety】 Flat Polished Edge for safe to handle..
• 【Hight quality 】Resistant to thermal shock compared to regular glass. A good build plate upgrade replacement..
• 【Flat Enough】 Reduces warping, keep the printing surface level..

Vinpower Digital Cronus Plus Blu-ray/DVD/CD Publishing System with Inkjet Printer 4 Drives - 500 Disc

• The 7 Bay CD/DVD Duplicator is at an amazing price! This duplicator has a master position plus 7 copy trays that will copy all your CDs and DVDs..
• It features ventilation with cooling fans..
• It provides an extra electrical outlet in the back to power a second duplicator or other piece of electronic equipment..
• Can copy up to 52x CDs and DVDs up to 24x. The duplicator will make 7 copies at a time..

BCZAMD 12V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs

• Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc..
• The improvement compared to ordinary red heating tube:.
• 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful..
• 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor..
• 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life..

BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs

• Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc..
• The improvement compared to ordinary red heating tube:.
• 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful..
• 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor..
• 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life..

PEI Sheet Magnetic Bed Flexible Spring Steel Platform with 3M Adhesive, 220x220mm（8.66 8.66inch) for Anet A8, A6, Robo R2, Wanhao Duplicator6, Duplicator i3 Monoprice Maker 3D Printers.

• ... when the heated bed reaches room temperature. then just wipe the surface with isopropyl alcohol and it can be reused as new..
• 【Practical Features】: Flexible, removable, high strength and heat resistance, good adhesion to PLA and ABS,220x220mm PEI sheet size is suitable for Anet A8,Cocoon 3D Printer, Wanhao Duplicator i3 V1/ Plus Monoprice Maker and similar size 3D printers..
• 【 Notice】: There is a transparent protective film on the surface of the smooth PEI sheet spring steel build plate, which needs to be torn off before use. If there are bubbles on the film, it is not a quality problem, just tear it off, it will not affect the use.If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours..