Reviews Voltage Measure

Fluke T6-600 Electrical Tester

  • Measure voltage with or without test leads.
  • Be safer: Measure voltage to 600V through the open fork, without test leads.
  • Be faster: Not need to open covers or remove wire nuts simultaneously measure voltage and current.
  • Be everywhere: 17.8 millimeter open fork is widest in the industry.
  • Measure up to 200 A on 4/0 wires (120 millimeter2).
  • Field Sense technology for AC voltage, current and frequency measurement without making electrical contact to live voltage. Jaw opening: 0.7 inch.
Check Stock

Klein Tools NCVT-2 Voltage Tester, Non-Contact Dual Range Voltage Tester Pen for Standard and Low Voltage, with 3 m Drop Protection

  • Measure voltage with or without test leads.
  • Be safer: Measure voltage to 1000V through the open fork, without test leads.
  • Be faster: Not need to open covers or remove the wire nuts simultaneously measure voltage and current.
  • Be more efficient: Simultaneously measure voltage and current.
  • Be everywhere: 17.8 millimeter opens fork is widest in the industry.
  • Measure up to 200 am on 4/0 wires (120 Mm2).
Check Stock

Fluke T6-600/62MAX+/1AC Kit with Test Meter, IR Thermometer and NCV Tester

  • Measure voltage with or without test leads.
  • Be safer: measure voltage to 600V through the open fork, without test leads.
  • Be faster: not need to open covers or remove wire nuts - simultaneously measure voltage and current.
Check Stock

Fluke 715 Volt/mA Loop Calibrator

  • Measure Loop Current (0-20 Ma, 4-20 Ma) Signals With Very High Accuracy Of 0. 015% And 1 Ma Resolution.
  • Measure Voltage Output Process Signals From Places, Transmitters.
  • 24V Loop Supply With Simultaneous Current Measurement.
  • Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015-Percent and 1 mA resolution.
  • Compatible with toolpack magnetic hanging system.
Check Stock

FNIRSI 1014D Digital Storage Oscilloscope 100MHz Dual Channel Oscilloscope Signal Generator

  • Built in DDS signal generator, support 12 kinds of function signal. Industry's original 【Capture output signal】 function，can store up to 1000 capture signals. Targeted high intelligent decoding algorithm, the encoder life is infinite.
  • Intelligent anti-burn，1X Can withstand up to 400V withstand voltage. 100MHz analog bandwidth @ 1GSa/s sampling rate（1X = 5MHz，10X = 100MHz）. Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast.
  • High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 0 ~ 400V，100X can measure 0 ~ 4000V. Up to 12 parameters measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period.
  • Cursor measurement function, it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic). At any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO.
  • One-button waveform storage and screenshot. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zoomin....
Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock

Diymore USB Charger Doctor Current Voltage Charging Detector Battery Voltmeter Ammeter Multimeter USB Tester Mobile Power Panel Monitor Gauge DC LED Display

  • The tester uses a new generation of power four semi~ double loop integral converter IC , with a precision bandgap reference , range accuracy , high....
  • High temperature can be used for measuring USB powered or power consumption of the interface , mobile phone charger , U disk and other products..
  • Can easily measure the operating current of the output voltage of the USB port and equipment..
  • Smallsize , no power , and other ancillary equipment, plug and play also detect USB charger output voltage and current are standard suitable for....
  • USB powered devices can be used to measure air , voltage loads , USB terminal equipment working voltage and current ..
Check Stock

uxcell Class 2.5 DC 0-15V Voltage Panel Gauge Meter Voltmeter

  • Good analog panel meter to measure voltage for experiment or home use..
  • With the accuracy of class 2.5, it can measure voltage from DC 0V to DC 15V..
  • Analog panel is easy to read and has low consumption..
  • Small in size, light in weight, convenient to carry..
  • Clear and easy to read scale and a button for fine tuning the dial..
Check Stock

UEi DL479 Digital Clamp Meter T-RMS Auto Ranging 6000 Counts, HVAC Current Voltage Tester, Measures AC Amps AC/DC Volts Temperature Capacitance Frequency Diodes Duty Cycle Continuity Resistance NCV

  • 【Innovative Super Large Full Display】This Clamp has a large full display and auto function, which makes it easy to read and operate. The Amp meter is as big as your phone and can be easily put in your pocket.
  • 【Smart True-RMS clamp meter】 This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
  • 【Multi-function and Large Range】 Backlit LCD Display, LED Flashlight, Temperature Measurement included K-Type Thermocouple, Low Battery Indication, Auto power off after 15 minutes inactivity. Large measure range can measure DC/AC current up to 600A.
  • 【NCV Defection Function】 Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • 【Highly Automation】Automatic recognition of AC and DC voltage, resistance, diode, capacitor.
  • Avoid hazardous situations by using the convenient clamp to safely measure AC or DC current without having to strip a cord or break a circuit.
Check Stock

Comidox 1Pcs 20/24 Pin LCD Computer PC Power Supply Tester for ATX BTX ITX TFX SATA with Buzzer Automatic Alarm

  • The LCD power tester is a powerful power test device. This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in liquid crystal to quickly detect the performance of computer power supply..
  • The LCD displays various parameters such as output voltage and PG. When each parameter exceeds the normal value, the buzzer will sound a warning and the corresponding value will flash..
  • It can measure the voltage of each group of power supply 3.3V/+5V/+12V/-12V/SB+5V/PG, and also measure the output wire P4/P6/P8/SATA/IDE, external DIE/SATA/P6/P8 is the light Displayed, there is no LCD voltage. Only the 24pin or 20pin will have the LCD voltage..
  • It has LCD intuitive and accurate display voltage (+/-0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and many test functions. It is the best choice for quickly detecting PC power..
  • Support 20Pin, 24Pin ATX interface / SATA interface / 4Pin, 8Pin interface / PCI-E graphics card 6Pin interface / floppy drive interface / ATE hard disk interface..
Check Stock

Greenlee DM-310 Averaging Digital Multimeter, 1000-Volt 10A AVG

  • Use to measure voltage, resistance, current and continuity.
  • Excellent for measuring AC voltage of electrical circuits.
  • AC/DC voltage, AC/DC amperage measurement.
  • Non-contact voltage detection for identifying live lines without contacting conductors.
Check Stock

HiLetgo 2pcs 0.56' Digital Voltmeter Ammeter DC 100V 10A Amp Voltage Current Meter Tester 0.56 Inch 3 Bits Blue + Red Dual LED Display Panel with Connect Wires

  • 0.56" Digital Voltmeter Ammeter DC 100V 10A Blue + Red Dual LED Display.
  • 10A Amp Voltage Current Meter Tester with 3 Bits Blue + Red Dual LED Display.
Check Stock

Klein Tools CL320KIT HVAC Kit for HVAC Testing; Digital Clamp Meter, Non-Contact Voltage Tester, and Infrared/Probe Thermometer

  • HVAC Kit with testers for the HVAC Professiol: HVAC Digital Clamp Meter, Dual IR/Probe Thermometer, and Dual Range Non-Contact Voltage Tester with Flashlight.
  • Cat. No. CL320 HVAC Clamp Meter with TRMS technology measures AC current, NCVT, AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, continuity, and temperature.
  • Cat. No. IR07 Dual IR Probe and Thermometer measures temperature from -40 to 572 Degrees Fahrenheit (-40 to 300 Degrees Celsius).
  • measure surface temperature with Infrared Thermometer (DS ratio 8:1).
  • Measure air vents and duct temperature using temperature probe with hands-free hanging hook.
  • calculate differential temperature (T1-T2) for both IR and probe temperatures.
  • Cat. No. NCVT3P is dual-range and detects from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.
Check Stock