Reviews Voltage Detectors

Radar Detector Cable, with USB to RJ11 Plug,for Escort Valentine One Uniden Beltronics Cobra Radar Detector,Replacement Power Cable for Radar Detectors(RJ11-6.56ft)

• 【Compatible】It can power Radar Detectors with phone type jacks. Compatible with Uniden, Escort, Beltronics, Valentine one and other Telephone Plug RJ11 Radar Detectors..
• 【Notice】Please check the working voltage of the radar detector. Most radar detectors have a working voltage of 12V. When the USB connector of the radar detector cable is connected to the car, the output voltage of the car USB socket needs to be consistent with the working voltage of the radar detector..
• 【High Quality Copper Material】Adopt industrial grade chips and high quality copper conductors, which is tightly fitted with the wire to enhance the transmission quality and avoid external interference. High elastic PVC glue layer, avoid winding and not easy to damage..
• 【Durable】Modular connectors have been upgraded. Now it is tighter when inserted,ensuring that multiple insertions and not easy to break when pulled out..
• 【Wide application】It is also suitable for Replacement Power Cable supply for Valentine One, Escort Passport 9500i, 8500 X50, Solo S2, Passport 7500S, 8500, 7500, 6800.
• Beltronics STi Driver, Pro RX65, Pro RX55, Vector 995, 965, 955, 940 (phone style connector), 895, and Express 795.
• Uniden LRD950 Radar Detector and most Radar Detectors with RJ-11 jack..

EC Buying GY-SGP30 Gas Sensor, Air Quality Carbon Dioxide Formaldehyde Monitoring TVOC CO2 Gas Sensor Module, a Digital Multi-Pixel Gas Sensor for Indoor Air Quality Monitoring,co2 Sensor Arduino I2C

• ♥GY-SGP30 gas sensor is a multi-pixel gas sensor for indoor air quality applications with excellent long-term stability, I2C interface with TVOC and CO2eq output signals, very small 6-pin DFN package: 2.45 x 2.45 x 0.9 mm3, Low Power: 48 mA at 1.8V, Reflow Solderable.
• ♥ Product parameter range：① Power supply voltage VDD: ‑0.3V to +2.16V ②Power supply voltage VDDH:‑0.3V to +2.16V ③Storage temperature range: ‑40 to +125°C ④ Operating temperature range: ‑40 to +85°C ⑤ Humidity range: 10%‑95% (non-condensing).
• ♥ Product features:1. Supply voltage 3.3V or 5V.
• 2.IIC communication interface, 3. Imported highly sensitive SGP30 formaldehyde sensor, chip power supply voltage is 1.8V.
• 6. The onboard 1.8V LDO chip supplies power to SGP30, so the input power can be 3.3V or 5V 7. Product pins: VCC (3.3-5V), GND, SCL, SDA (4 pins in total).
• ♥ Product use: SGP30 module can be used in air quality detectors, formaldehyde detectors, portable gas detectors, various DIY designs, etc..
• ♥ packing list: 1X GY-SGP30 Gas Sensor1x4 pin header.

Juried Engineering LM319N LM319 High Speed Dual Comparator Breadboard-Friendly (Pack of 5)

• Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
• Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
• Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
• Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
• Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.

Radar Detector Cable, USB to RJ11 Plug Cable,for Escort Valentine One Uniden Beltronics Cobra Whistler Radar Detector,Replacement Power Cable for Radar Detectors (RJ11-3.3ft)

• ✅【The Latest Patented Technology】After experimental comparison, the ordinary USB cable is incompatible with the working voltage of most radar detectors, which causes the radar detectors cannot be started.To solve this problem,our department has developed a radar detector cable with two working voltages at the same time. You can switch the USB socket at will without affecting the use of the radar detector..
• ✅【Stable Working Performance】The radar detector cable adopts a new chip encryption technology to ensure that the radar detector can be stably turned on when the cable is connected to 5V or 12V USB interfaces,giving you all around protection wherever your adventures take you..
• ✅【High Quality Copper Material】Industrial grade high quality copper conductor is used, which is closely connected with the conductor to improve the transmission quality and avoid external interference. High elastic PVC adhesive layer, avoid winding, not easy to damage..
• ✅【Compatible】It can power radar detectors with phone type jacks. Compatible with Uniden, Escort, Beltronics, Valentine one and other Telephone Plug RJ11 radar detectors..
• ✅【Multiple Choice】We have charging cables of various lengths, 6.56ft: B0BLTSC26Z, 9.84ft: B0BLTSS9C2.

Radar Detector Cable, USB to RJ11 Plug Cable,for Escort Valentine One Uniden Beltronics Cobra Whistler Radar Detector,Replacement Power Cable for Radar Detectors.(RJ11-6.56ft)

• ✅【The Latest Patented Technology】After experimental comparison, the ordinary USB cable is incompatible with the working voltage of most radar detectors, which causes the radar detectors cannot be started.To solve this problem,our department has developed a radar detector cable with two working voltages at the same time. You can switch the USB socket at will without affecting the use of the radar detector..
• ✅【Stable Working Performance】The radar detector cable adopts a new chip encryption technology to ensure that the radar detector can be stably turned on when the cable is connected to 5V or 12V USB interfaces,giving you all around protection wherever your adventures take you..
• ✅【High Quality Copper Material】Industrial grade high quality copper conductor is used, which is closely connected with the conductor to improve the transmission quality and avoid external interference. High elastic PVC adhesive layer, avoid winding, not easy to damage..
• ✅【Compatible】It can power radar detectors with phone type jacks. Compatible with Uniden, Escort, Beltronics, Radenso XP etc and other Telephone Plug RJ11 radar detectors..
• ✅【Multiple Choice】We have charging cables of various lengths, 3.3ft :B0BLTQK74Y .9.84ft B0BLTSS9C2..

Juried Engineering LM393P LM393 IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)

• Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
• Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
• Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
• Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
• Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.

Fluke FLK2AC/90-1000V Pocket-Sized Voltage Detector, 90 to 1000 V AC

Texas Instruments LM358P Low Power Dual OP Amplifier, General Purpose, 8-Pin, -16-32 Volt, 9.81 mm L x 6.35 mm W x 4.57 mm H (Pack of 15)

• Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
• Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
• Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
• Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
• Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.

Hidden Camera Detectors Anti Spy Detector for Wireless Audio/Video Hidden Camera Detectors Bug Detector Privacy Protector,Case for Wyze Cam Pan 1080p Security Camera Black

• 【Privacy safety 】: Our RF signal anti spy detector can detect eavesdropping devices, pinhole cameras, wired and wireless hidden cameras, GPS....
• 【Super Signal detection】 : Wifi detect : Our hidden camera detectors can detect radio waves, 2G,3G,4G mobile signal, SIM card bug.
• 【Ultra high sensitivity】： Our security camera/audio jammers have upgraded ultra-sensitive chips, this camera detector has 5 levels of....
• 【Long standby】：Our Anti spy cameras/audio detectors have rechargeable lithium-ion battery,low voltage prompt function.(Each full charge can be....
• 【Lightweight and Multiple detection mode】：Our anti spy pen use High-quality PC material， Portable like a pen (only 30g), easy to carry and....

MCP6002-I/P DIP-8 1 MHz Gain Bandwidth Product, Low-Power Op Amp Pack of 6 Pcs

• Rail-to-Rail Output, Specified Temperature Range: Industrial Grade: −40°C to 125°C.
• Wide Bandwidth: 3 MHz, Input Bias Current: 1 pA.
• High Slew Rate: 2.4 V/µs, Input Noise Voltage: 39 nV/√Hz.
• Supply Voltage Range: 2.7 V to 16 V, Supply Current: 550 µA/Channel.
• Example Applications: E-Bike, Power Banks, Smoke detectors, Solar Inverters, Low-Power Motor Controls, Battery-Powered Instruments, Building Automation.

NGPOPX Natural Gas Detector, Digital Display Combustible Gas Detector Home Gas Leak Alarm, Sensor, Tester, Sniffer Kitchen, Monitor Combustible Gas Level Methane, Lpg, LNG; Voice & Light Warning

• COMING WITH MOUNTING ACCESSORIES: Combustible gas detectors are limited to indoor use, just drill holes in appropriate positions, and done.
• It can be used in home kitchens, bathrooms, living rooms, game rooms, study rooms, basements, storage rooms, cellars and other places..
• WIDELY USED: Natural gas detectors and the effective monitoring range is 110-160 square feet. If it exceeds this range, we recommend that you install multiple detection alarms..
• SOUND WARNING: Gas Leak Detector offers Voice Notification and a digital readout of the GAS concentration.accurately monitor leaked gas.When gas leak concentration reaches presetting level, the alarm provides a visual and audible signal..
• EASY INSTALLATION:Natural Gas Detector adopts Easy-to-install Design, can be used by plugging directly into the power socket to detect leaked gas.Voltage 110V ~ 220V can use it..
• PRECAUTIONS: Gas leak detector The system warm-up time is about 1-2 minutes. During this time period, the gas test will not work. You need to wait for the display to show 0 before it can be tested normally..

Garrett ATX Deepseeker Package with 11x13\ Closed DD Coil Package Plus 20\ Deepseeker Coil

• ...kes this gold detector much more accuracy. The diameter of this metal detector’s search coil is 10 inches. As you know, the bigger the search coil is, the higher the sensitivity, let you detecting more efficient and time-saving..
• ✅【IP68 WATERPROOF METAL DETECTOR】This detector is a good chioce for beach metal detectors, the waterproof stem and search coil allow you to explore in the water or on the beach. Definitely a practical and exciting waterproof metal detectors for outdoor activities. It works indoors, outside, seashore, garden, park, wooded area, lawn, sand or soil. （*Notice：the control box is NOT waterproof*).
• ✅【MULTI-MODES PROFESSIONAL DETECTORS】The 2021 new version metal detectors has 4 distinct modes lets in you to correctly search for the favored metals like cash relics jewelry gold and silver and so on. ① All metal mode: notifies you on every occasion it sees any metal. ② DISC mode: permit you to distinguish the forms of metals detected and ignore junk. ③ Notch mode: allows you to accept or reject individual categories ④ Pinpoint mode: enables you pinpoint the target..
• ✅ 【LIGHT-WEIGHT & ERGONOMICS DESIGN】Our metal finder detector equipped with 45”to 60” adjustable stem applicable to all age metal detector ....

Minelab Gold Monster 1000 Universal Metal Detector with 2 Search Coils, Waterproof

• KIT INCLUDES: Minelab Gold Monster 1000 Metal Detector | 10x6" DD Waterproof Search Coil | 5" DD Waterproof Search Coil | Headphones | Lithium-Ion Battery | 8 x AA Batteries | Lens Cleaning Cloth | Minelab 2 Year Control Box & Coil Warranty.
• 45 KHZ VLF & 24-BIT SIGNAL PROCESSOR: This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals..
• IMPROVED DISCRIMINATION: The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximise your gold recovery..
• VERY LOW FREQUENCY: VLF (Very Low Frequency) is a conventional single frequency sine wave continuous transmission technology. This is the traditional type of technology used in most basic metal detectors. Single frequency sine wave detectors create an electro-magnetic field, which is transmitted into the ground in a continuous wave. The receive signal processing has improved enormously. ​.