Stony Brook PDVDI-120 Portable Falling Needle Field Viscometer 98939-30
Check StockNickel Adhesive Electrically Conductive Epoxy 1 Part Heat Cure AA-Bond N02 2.5gm Syringe
- Viscosity at 25 °C cps Soft Paste, Specific Gravity, mixed 3.2.
- Mechanical Properties Hardness, Shore D 88, Reactive solids contents, % 100 Pot Life 30 minutes.
- Volume Resistivity ohm-cm less than 0.038.
- Mixed Viscosity at 25°C, cps Soft Paste.
- Operating Temperature -55 to 175 °C, Cure time 2 hours @ 125°C 1 hour @ 150°C 30 minutes @ 175°C.
Check StockOctopus Glue - Liquid Optically Clear Adhesive (LOCA) - The Original Premium LOCA UV Glue (3 ml Single)
- SUPER LOW VISCOSITY: 1400 (MPA.S). Super low viscosity means that Octopus Glue is not very thick and flows very easily. Not only are air bubbles less likely to occur with Octopus Glue, but they are also easier to remove. Octopus Glue's super low viscosity also means that you can get the job done with less glue than with generic LOCA formulas. Using a thinner layer of glue also results in increased optical performance of the repaired device. Ask about other generic LOCA's viscosity values, they will be most likely over 2,000 to 5,000..
- HIGH LIGHT TRANSMITTANCE: 99% @175 um. Octopus Glue improves the viewing experience by increasing contrast ratio and minimizing quality loss due to reflection. Its unique formula results in a clear, haze-free and yellowing-free finish like a brand-new phone. EXCELLENT GAP FILLING: Octopus Glue fills small scratches on the digitizer surface that may occur when removing old adhesive..
- HARDNESS: 25A. Octopus Glue's 25A hardness increases the display's overall strength and extends the screen assembly's life by making the display more resistant to heat, moisture, and temperature changes..
- 3ml GRADUATED SYRINGE: Octopus Glue takes the guess-work out of a repair by coming in a UV resistant amber graduated syringe that measures in....
Check StockValvoline Daily Protection SAE 5W-30 Synthetic Blend Motor Oil 5 QT (Packaging May Vary)
- Designed for use in four-stroke marine engines.
- Synthetic blend formulated to provide ultimate corrosion resistance and wear protection in high-rpm four-stroke outboard motors.
- Offers industry-leading strength and viscosity retention to maintain peak engine performance and reliability.
Check Stock3M ESPE 7614B0.5 RelyX Veneer Cement Syringe, Shade B0.5/White
- Allow precise application directly where you need it.
- Provides homogeneous mixture of low to medium viscosity 2-part systems.
- For use with: 8332-25ML, 832HD-25ML, 9200-25mL and 9200FR-25mL Dual Epoxy Syringes.
Check StockUnlimited Off-Road Expo
- Made of synthetic butyl rubber, it is flexible, elastic, and has high viscosity. Besides, it is waterproof and sounds deadening. It can reduce the noise and wind when you drive..
- Butyl rubber sealant features sealing adhesion, butyl tape can be sticky to any type of metal, concrete, glass, plastics, and porous surfaces, no worries about falling off.Easy installation and removal..
- Used to create a seal or deaden sound on all types of vehicles, such as cars, RVs, boats. It is sticky to deaden sound and create a watertight seal, making it a good window or headlight weld..
- Color: Balck. Length: 400cm / 157.48″(L). Width: 8mm / 0.31″(W). Thickness: 8mm / 0.31″(T)..
- Before sealing, please make sure the sealing areas are dry, clean, free from dust, oil, or grease. Then measure the butyl seal rope you gonna need and simply take the sealant from paper and press it at the sealing areas..
Check StockKrytox GPL 206 Grease Pure PFPE/PTFE 8 oz Tube
- Temp Range: -36C thru 260C: Viscosity 25cSt/100C, 240cSt/40C.
- Stable in a wide variety of operating conditions/environments.
- Nonflammable: Krytox Grease contains only carbon, oxygen & fluorine, (no hydrogen or silicone).
- Chemically Inert: Resistant to oxygen and inert to most all chemicals.
- Inert nature allows Krytox Grease to outlast/outperform hydrocarbon products.
- At operating temps and pressures Krytox Grease is highly resistant to attack by gaseous and liquid oxygen.
- Exposure to significant radiation causes only minor DE polymerization (8% decrease of viscosity) and no formation of solids or sludge or change in....
Check Stock3M Scotch-Weld Urethane Adhesive 3535, Off-White, Part B/A, 2 fl oz kit
- 3M 590 Polyurethane Glass Adhesive Sealant is a one-part, high-viscosity polyurethane sealant intended for use in structural glass bonding and window glazing applications in automobiles..
- The high-viscosity formula was specifically designed to meet the unique demands of structural glass bonding. It maintains flexibility after being cured, is crack resistant, and expands/contracts with the surrounding temperature, resulting in a bond that is long-lasting and is resistant to the elements and vibration fatigue..
- A 25 to 40 minute skin time provides ample opportunity to complete installation and a 3-hour drive away time will ensure unnecessary space isn’t taken up in your shop by completed projects..
- The versatile formula can also be used to bond a variety of substrates such as glass, acrylic, polycarbonate, and many more materials. Perfect for applications such as structural windshield installations, PMMA windshield applications, hard-to-bond polycarbonates/acrylics, and installing flush mounted glass for marine or automotive use..
- Drive-Away Time: 3 hours. Skin Time: 25 to 40 minutes. Requires a manual or pneumatic applicator for use..
Check StockKrytox by Chemours GPL 206 Grease Pure PFPE/PTFE 0.8 kg Cartridge D10170765
- Temp Range -36C thru 260C Viscosity 25cSt/100C 240cSt/40C Stable in a wide variety of operating conditions/environments.
- Nonflammable Krytox Grease contains only carbon oxygen & fluorine (no hydrogen or silicone) Will not burn or support combustion Passes impact....
- Chemically Inert Resistant to oxygen and inert to most all chemicals Inert nature allows Krytox Grease to outlast/outperform hydrocarbon products....
- At operating temps and pressures Krytox Grease is highly resistant to attack by gaseous and liquid oxygen The preferred choice in oxygen use and....
- Exposure to significant radiation causes only minor DE polymerization (8% decrease of viscosity) and no formation of solids or sludge or change in....
Check StockKrytox by Chemours D10070331 GPL 206 Grease Pure PFPE/PTFE 0.5 oz Tube
- Temp Range: -36C thru 260C: Viscosity 25cSt/100C, 240cSt/40C.
- Stable in a wide variety of operating conditions/environments.
- Nonflammable: Krytox Grease contains only carbon, oxygen & fluorine, (no hydrogen or silicone).
- Chemically Inert: Resistant to oxygen and inert to most all chemicals.
- Inert nature allows Krytox Grease to outlast/outperform hydrocarbon products.
- At operating temps and pressures Krytox Grease is highly resistant to attack by gaseous and liquid oxygen.
- Exposure to significant radiation causes only minor DE polymerization (8% decrease of viscosity) and no formation of solids or sludge or change in....
Check StockVibra-TITE 567 High Temperature Retaining Compound, 50 ml Bottle, Green
Check StockAtwood Hydro Flame Furnace PC Board kit Part 31501,33488,33727
- Atwood 38676 RV Hydro Flame Furnace PC Board 31501.
- 7912-II, 7900-II 16 & 20, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D.
- 85-IV 16, 85-IV 20, 85-IV 25, 85-IV 31, 85-IV 35, 85-III 16-20, 85-III 25, 85-III 31-35, 85-II 25, 85-II 31-35, 85-I 16-20,....
Check StockXfactor Professional Grade UV LOCA Glue Clear Adhesive (50ml Xfactor Low Viscosity UV LOCA)
- ...R: Xfactor UV GLUE Liquid Optical Clear Adhesive (LOCA) is formulated especially for bonding the outer glass to the digitizer in a smart phone or tablet display assembly. Compatible with all touchscreen devices and other phones and tablets needing LOCA to attach glass and/or digitizer to LCD.
- PROFESSIONAL GRADE, LOW VISCOSITY adhesive dries clear! - 2000mPa*s viscosity (general LOCAs average 5000mPa*s). Thanks to such LOW VISCOSITY, bubbles/voids can be easily removed, smaller amounts of glue can be used, easier to clean, flows well, & cures with NO YELLOWING EFFECT, GUARANTEED!.
- EXCELLENT GAP FILLING & HIGH LIGHT TRANSMITTANCE: Xfactor UV GLUE LOCA fills fine scratches that may occur upon removing the old adhesive. Xfactor UV GLUE eliminates mirror effect, rainbow effect, poor contrast, and low brightness, while improving touch sensitivity for that OEM look and feel you so desire!.
- BLACK LIGHTPROOF TUBE ensures adhesive will remain in a liquid state, rather than harden like transparent tubes. Note: LOCA is sensitive to UV. Exposure to sunlight will cure adhesive, which is why all our tubes are black.
Check Stock