Reviews Video Optic Transceiver

Mini 3G SDI Fiber Extender 1080P 3G-SDI Over Fiber Converter Broadcast Level SDI Video Fiber Optic Converter Include SFP Module Single-Mode Single Fiber 20km with RS485 Tally Loop Output

  • 3G-SDI Video: The SDI Fiber converter support 3G/HD/SD SDI with 8-channel audio embedded, resolution up to 1080P&60HZ, Automatic reclocking 270Mbit/s - 1.48Gbit/s - 3Gbit/s.
  • Support Rs485&Tally: The 3G SDI to fiber converter support both Backwards RS485(Max 57600) and Tally. You can control other device or use Tally Function in broadcast.
  • Small Size: The 3G SDI Fiber Extender only 2.8*1.7*0.9 inch in size, it’s very compact and can install on cameras.
  • Loop output: The 3G SDI Fiber Optic transceiver support loop output, you can see the image easily in local side.
  • Support CWDM/DWDM SFP: The Fiber optic support CWDM/DWDM technique. You can use CWDM/DWDM SFP module when you only have limited fiber cable resource.
Check Stock

StarTech.com 10G Network Card - 1x 10G Open SFP+ Multimode LC Fiber Connector - Intel 82599 Chip - Gigabit Ethernet Card (PEX10000SRI), Black

  • Get high performance connectivity over multi-mode fiber by upgrading your server or workstation with a 10GBase-SR port.
  • Single-port 10G network card with installed multimode SFP+ transceiver (up to 330 m range).
  • Works with computers with PCI Express such as Dell Inspiron or HP Pavilion & fiber optic network equipment such as switches.
  • Fiber optic NIC / Fiber LAN card / Intel NIC / Intel Fiber Optic PCIe network card / 10G NIC.
  • Intel chip with Intel Virtualization Technology for Connectivity.
Check Stock

ANHAN Passive Video Balun with Power BNC to RJ45 Adapter Cat5 / Cat6 Cable to BNC Male Network Transceiver For CCTV Security Surveillance Camera 1 Pair

  • Power ,audio and Video signals are routed via Cat5e/Cat6 Cable with RJ45 connectors instead of coaxial cable,Low-cost cable, reduce the video noise.
  • Type: Video Balun transceiver. Video input/output Male BNC / RJ45 Port / DC Jack. Male BNC with extended mini-coax pigtail.
  • BNC Male to RJ45 Long Transmission Distance Network Transceiver:Power signal up to 600 ft (200m) in pairs,12V/24V, DC/AC .Color video up to 1000 ft (300m) in pairs via UTP Cat5e/6.please increase power voltage when distance is more than 150m.
  • Passive Video Power Balun Works with most video devices, Compact size for easy installation.
  • Package Inclueds :1 Pair BNC to RJ45 Video Balun Transceiver Adapter,1 x Power Cable.
Check Stock

Mini 3G-SDI Video Extender with SDI Loop Output 1080P 3G-SDI Fiber Converter Extension of Distances Up to 20km Over Single-Mode Optical Transceiver with Tally or Reverse RS485

  • 3G-SDI Optical Transceiver supports 1-channel 3G/HD-SDI Video (audio embedded) & Tally or Reverse RS485 signal transmitted via fiber optical cable, and monitor the signal locally over a 3G/HD-SDI loop output.
  • HD Fiber Converters includes one transmitter and one receiver for 1080P 3G/HD-SDI signal, transmits video signals up to 20km over a single fiber optic cable.
  • Each channel includes 8-channel audio embedded, automatic cable equalization, used for all rate below 3.2 Gb/s (Belden 1694A).
  • Directly compatible with 3G/HD-SDI camera systems, support hot swap and hot plug.
  • Handle all Pathological patterns, fully digital non-compression broadcast level transmission.
Check Stock

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (3M, OM3-5Pack)

  • ...LEX — 50/125 micron fiber cables with dual small form factor LC connectors are designed for 10 Gigabit applications in SAN networks and data centers.
  • OM3 LOMMF (laser optimized multi-mode fiber) rated.
  • Compatible with all multimode 50/125 micron fiber cabling Connects to VCSEL laser network equipment such as SFP+ transceivers, Ethernet switches, media converters, industrial Ethernet devices, and optical fiber NIC’s.
  • ★ WIDELY USED — It is Suitable for SFP transceivers and media converters, compatible with HUAWEI and Cisco, such as Cisco Compatible 10GBASE-SR SFP+ Transceiver Module, Cisco SFP-10G-SR Gigabit Interface Converter SFP Module, Cisco SFP-10G-SR 10GBase-SR SFP+ Transceiver, Cisco Compliant 1000BASE-SX SFP Transceiver Module GLC-SX-MM-OEM, Cisco MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver, Cisco GLC-SX-MMD, Cisco Gigabit SX Mini-GBIC..
Check Stock

Digital Optical Audio Cable Toslink Cable - [Cotton Braided Jacket,Durable and Flexible]EMK Fiber Optic Cord for Home Theater, Sound bar, TV, PS4, Xbox & More (6.6Ft/2m)

  • ...LEX — 50/125 micron fiber cables with dual small form factor LC connectors are designed for 10 Gigabit applications in SAN networks and data centers.
  • OM3 LOMMF (laser optimized multi-mode fiber) rated.
  • Compatible with all multimode 50/125 micron fiber cabling Connects to VCSEL laser network equipment such as SFP+ transceivers, Ethernet switches, media converters, industrial Ethernet devices, and optical fiber NIC's.
  • ★ WIDELY USED — It is Suitable for SFP transceivers and media converters, compatible with HUAWEI and Cisco, such as Cisco Compatible 10GBASE-SR SFP+ Transceiver Module, Cisco SFP-10G-SR Gigabit Interface Converter SFP Module, Cisco SFP-10G-SR 10GBase-SR SFP+ Transceiver, Cisco Compliant 1000BASE-SX SFP Transceiver Module GLC-SX-MM-OEM, Cisco MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver, Cisco GLC-SX-MMD, Cisco Gigabit SX Mini-GBIC..
Check Stock

LC-LC OM3 MMF Duplex Fiber Optic Patch Cable 1-Meter 3.3-ft

  • A MANUFACTURER - 14 years ISO certified manufacturer, assembly SFP transceiver, fiber patch cords, media converter and networking system..
  • HIGH QUALITY MATERIALS - PVC/LSZH fiber cable.
  • RELIABILITY TESTING - 100% insertion loss test.
  • MMF: Insertion loss≤0.3(dB), Return loss≥-30(dB)..
  • STANDARDS COMPLIANT - TIA/EIA 568-C.3 / 604-10 / 492AAAA, IEC60793-2-10 A1b, CE and RoHS..
  • WIDE APPLICATION - works with all brands of multimode SFP transceivers and fiber optic networks..
Check Stock

QSFPTEK 10GBASE-ER SFP+ Module, 10giga Mini GBIC SFP 1550nm, 40km, 10GE Gigabit Ethernet DDM LC Single-Mode Fiber Optic Transceiver for Cisco SFP-10G-ER, Ubiquiti, Netgear, Mikrotik

  • Wide Compatibility: Compatible for Cisco SFP-10G-ER, Ubiquiti, Mikrotik, D-Link, Supermicro, Netgear and Other Open Switches. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
  • 10GBASE-ER SFP+ fiber module: 10Gb/s data rate, duplex LC connector, 1550nm wavelength, the transmission distance up to 40km, working temperature: -5℃ ~ +70℃, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): ＜ -15.8..
  • Easy to use: SFP+ 10G single-mode transceiver, plug and play, hot-pluggable. DDM support: DDM allows you to monitor the critical information, to find out some potential problems..
  • 100% high quality products: We always strictly control product quality, every module had been individually tested on switches before shipping, customers can rest assured to buy..
  • We offer many compatible options, if your brands are not listed here, please contact us. QSFPTEK is a manufacturer of transceiver, customized service is available..
Check Stock

StarTech.com PCI Express Gigabit Ethernet Fiber Network Card w/Open SFP - PCIe GbE SFP Network Card Adapter NIC - Fiber Optic SFP Adapter (PEX1000SFP2)

  • Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice.
  • PCIe GbE Fiber Network Card with Open SFP Slot.
  • Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.
  • No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.
  • Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design.
  • Compatible with most Gigabit SFP modules.
  • Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX.
  • Includes low-profile/half-height installation bracket.
  • Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1.
Check Stock

SFP+10GBASE-T Transceiver Copper RJ45 10Gbe SFP Module Compatible for Cisco SFP-10G-T-S, Meraki MA-SFP-10G-T, MikroTik, Unifi, Netgear, QNAP, Supermicro, Cat6a/ Cat7, 30m

  • [Wide Compatibility] Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches..
  • [Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
  • [High Quality] All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch..
  • [After-sales Service] 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to contact us..
Check Stock

4PCS 1000BASE-T Gigabit SFP to RJ45 Copper Ethernet Modular Transceiver for Cisco,Meraki,Ubiquiti,D/TP Link,Supermicro,Netgear,Broadcom, 1.25G SFP-T CAT5E/CAT6 up to 100m Mikrotik S-RJ01

  • ...AS), Storage Area Network (SAN), and High Performance Computing (HPC) applications Low power consumption and low EMI emission design SFP RJ45 module.
  • Hot-pluggable with advanced ESD protection..
  • Easy to use & Durable: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function..
  • GESD is a professional manufacturer and accept customized orders. If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options).★After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality transceivers,every transceiver has been tested for 28 steps before shipping..
Check Stock

Godox Thinklite TT600S GN60 Built-in 2.4G Wireless X System Flash Speedlite Compatible for Sony Multi Interface MI Shoe Cameras

  • GN60 (m ISO 100, @105mm), Approx. 0.1-2.6s recycle time, 230 full power flashes (Using 2500mAh Ni-MH batteries), 22 steps of power output(1/1~1/128)..
  • Support M/Multi/S1/S2 modes, 20-200mm auto/manual zooming. With C.Fn custom function settings, focus assist lamp, buzz function, over-temperature....
  • Equipped with Optic transmission and 2.4G wireless transmission, offers you an even illumination and stable power output, giving you more outstanding....
  • TT600S can achieve 1/8000s high-speed sync functions when using in combination with high-speed triggers e.g. Godox Cells II transceiver, X1 TTL....
  • With high-resolution LCD panel to offer clear and easy operation. Turn the select dial to choose the amount of the settings..
Check Stock

Evertech Passive Video Balun with Power BNC to RJ45 Converter Cable Video Audio Power Transmitter via Cat5e/Cat6 for CCTV Surveillance

  • 1 Pair of BNC to RJ45 Adapter Passive Video Balun with Power Connector For CCTV Security Surveillance Camera Systems..
  • This video transceiver allows transmission of CCTV video, audio and low voltage power over UTP cable. Power, audio, and Video signals are routed via Cat5e/Cat6 Cable with RJ45 connectors instead of coaxial cable and reduces video noise..
  • This Balun Works with most video devices, Compact size for easy installation..
Check Stock