Reviews Vices And Clamping Tools

MILLING INDEXING 4 / 100 MM ROTARY TABLE QUALITY PRECISION HORIZONTAL VERTICAL WITH SUITABLE M6 CLAMP KIT & ROUND VICE/ VISE WITH 100 MM ROUND VICE

  • SET OF QUALITY 4" INCHES/ 100 MM REGULAR ROTARY TABLE WITH SUITABLE M6 CLAMP KIT & ROUND VISES/ VICES.
  • TABLE DIAMETER IS 4" / 100 MM & IS GRADUATED 360 DEGREES. WORM: GEAR RATIO IS 1: 36, WHICH MEANS 1 HANDLE ROTATION TURNS THE TABLE BY 10 DEGREES..
  • CENTER HEIGHT IN VERTICAL POSITION 2-1/16"/ 50 MM ( * ONLY THE TABLE) . IT CAN BE MOUNTED HORIZONTALLY AND VERTICALLY..
  • SUPPLIED WITH A CLAMP KIT & QUALITY CASTE IRON ROUND VICE WITH CLAMPING T NUTS. THE MOVING JAW HAS VERTICAL & HORIZONTAL V GROOVES TO HOLD A ROUND....
  • QUICK FAST DELIVERY THROUGH EXPEDITED SERVICE WITH A TRACKABLE AWB NO. TO USA & WORLWIDE..
Check Stock

WORKPRO 2-Pair Vise Jaw Pads, Magnetic Vice Jaw Covers Protectors, 5-1/2 inch Multi-Groove Jaw Pads and 6 inch Aluminum Pads Set

  • Two Pack: The set includes 6 inches soft standard pads and 5-1/2 inch multi-groove jaw pads, works with most Bench Vises, Clamps, Drill Press, Millers, and more.
  • Non-Marring: Aluminum Vise Jaws with drawer type soft pads are designed to protect hard workpieces, and the tough multi-groove pads perform well in protecting soft workpieces.
  • Skid-proof Surface: The drawer pads have a waffle surface to hold round or hex parts and support flat parts well, the mutli-groove provides 5 round grooves and 90° & 45° clamping angles.
  • Strong Magnets: Embedded magnets on the pads attract them to the vise tightly, keep vise pads securely in place and hold the work-piece better.
  • Multi-Purpose: These vice jaw pad sets can be used on many types of vices and help protect surfaces of wood, metal, plastic, tubing or any other workpieces using on a vice.
Check Stock

Anchor Wire Vise Anchor Vise Grape Trellis Anchor Vise for Tightening 8~11 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors (5 Pieces)

  • Adequate Quantity: our anchor vises set includes 5 pieces of anchor wire vices, suitable for 8 to 11 gauge wire, enough to meet your working and replacement needs.
  • Aluminum Material: these anchor wire vices are made of aluminum material with long term applicable ability.
  • These anchor wire vices can effectively keep the wire from slipping out.
  • Tiny Size: the size of our wire vise measures approx. 6 x 3.2 x 3.2 cm/ 2.36 x 1.25 x 1.25 inches.
  • Each wire vise is approx. 30 grams in weight.
  • It is convenient for you to carry or store those tiny wire vises.
  • Choice of Wire: It is recommended to use the anchor wire vise with bare or galvanized wire, not with wire with other coatings.
  • For proper application of the wire vise, please pay attention to and follow our recommendations.
  • Applicable Scenarios: our 8 to 11 gauge wire vise can be applied to build trellises, vineyards, fences or trees, providing you with an optimized experience for your garden work.
Check Stock

Rockwell JawHorse Portable Material Support Station – RK9003, Black and green

  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools.
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method.
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot.
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects.
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would.
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push.
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force.
Check Stock

Kreg KWS1000 Mobile Project Center

  • Premium Folding Workbench: This portable work table can be a sawhorse, assembly table, and clamping station.
  • Handy Woodworking Tools: The workshop table has a 350-lb capacity and a storage shelf with a 25-lb capacity.
  • Home Improvement Tools: The bench track holds clamp.
  • table gives clamping capabilities of a bench vise.
  • Secure Workshop Accessories: Bench dogs, drill holsters, and storage holes in mobile workbench secure supplies.
  • Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check Stock

Bessey One Hand Trigger Clamps Medium EZR-SET

  • Set of 2 Track Clamps 6" Capacity Throat Depth 2 3/8" for use on track saw guides, 100 lb force.
  • Quick clamping, smooth operating, consistent clamping force for track saw quides & general clamping /spreading.
  • 4 5/8" to 12 1/8" spreading capacity, simple push button for reversing fixed jaw for change to spreading, no tools needed.
  • V-Grooved, non marring pressure pads included.
  • "Step Over" design jaw allows clamping over obstructions, includes ergonomic comfortable soft grips for easy clamping.
Check Stock

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

Kreg K5 Pocket-Hole Jig

  • The new Kreg Jig K5 is packed with features your are sure to appreciate.
  • It comes with a convenient front-mounted clamping handle, and it's connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts.
  • The quick-release Drill Guide Block makes set up simple.
  • Front-mounted clamp handle makes clamping easy.
  • Ratcheting clamp mechanism adjusts without tools.
  • Quick-release pin holds drill block in place, and can't get lost.
  • Storage Wings provide built-in storage for bits, screws, accessories.
  • Stop-Collar Setting Block makes drill bit setup easyDescriptionThe New Kreg Jig K5 Is Packed With Features Your Are Sure To Appreciate. It Comes With A Convenient Front-Mounted Clamping Handle, And It'S Connected To A Ratcheting Clamp Mechanism That Adjusts Without Tools Or Lock Nuts. The Quick-Release Drill Guide Block Makes Set Up Simple, And The Removable Support Wings Support Large Work Pieces And Provide Additional Storage Inside. Dust-Collection Is Also Standard, With A Swiveling Dust-Collection Port For Ease Of Use. Adding In The Adjustable Workpiece Stop, Hex-Shank Drill And Driver Bits, A Screw-Selection Chart, And The Durable Construction You Expect From Kreg, And You Have The Most Advanced Kreg Jig Yet..
Check Stock

Royars Update 90 Degree Positioning Squares Right Angle Clamps for Woodworking,2 Pack（5.5 *5.5 ）Aluminium Alloy Corner Clamp Woodworking Carpenter Clamping Tool for Picture Frame Box Cabinets Drawers

  • 【Super High Quality 90 degree clamps for woodworking】Our clamping square kit is processed by aluminum alloy and stainless steel, surface anodized....
  • 【Best Use Effect of woodworking tools】There are seven holes on each side of our squares, which has stronger clamping force. This corner clamps for....
  • 【Superb Details of woodpeckers tools】This 14cm carpentry right angle jig set have beveled edges, easy to handle and won't damage fragile cutting....
  • 【Widely Use of woodworking clamps】This Royars woodpeckers tools for woodworking professional use to assemble and DIY by claping boxes, drawers,....
  • 【Best Choice for Woodworking】:The actual use of professional woodworking work and sales volume shows that this size(140mm/5.5 inch )of clamping....
Check Stock

Quick Mount File Handle SH 220 for Needle Diamond and Small Files

  • ADD A LARGE HANDLE- To your files, reamers, hacksaw blades and other tang handled tools.
  • ONE HANDLE FOR MANY TOOLS- Attach to your uncomfortable tang-handled tools to tool handle to create a large maneuverable gripping surface.
  • POWERFUL HOLD- Steel parallel clamping jaws grip the entire length of the tang to prevent slipping and creates better tool control.
  • WOOD HANDLE- Won’t slip in your hand during use yet is comfortable and easy to control.
  • QUICK TOOL CHANGE- large, quick adjusting knurled knob ensures positive locking.
  • The General Tools and Instruments 890 File and Tool Handle adsd a large, maneuverable gripping surface to your uncomfortable tang-handled tools.
  • The steel clamping jaws grip the entire length of the tang for a powerful hold under heavy duty working conditions.
  • Additionally, the knurled adjusting knob provides positive locking and the effortless swapping of tools.
  • Use the rust proof handle to hold files, reamers, hacksaw blades.
  • At just over 1 inch around, it fits perfectly in the hand for comfortable and easy working.
Check Stock

90 Degree Clamp Cabinet Clamp 5.5 x 5.5 14 x 14cm Aluminum Alloy Right Angle square Tool Corner Clamps for Woodworking Tools Right Angle Clamp Drawers Picture Frame 2pack

  • Our clamping square tools are machined from aluminum alloy and stainless steel, the surface is anodized, corrosion-resistant, not easy to fade, and....
  • This corner clamps for woodworking tools has two measurement units, metric and imperial. It is laser-engraved and the scale is on the front of the....
  • wood working tools and equipment show that this size set is a scientific and appropriate length size selection.It can work with a clamping tool to....
  • The actual use of professional wood working work and sales volume shows that this size (140mm/5.5 inch ) of clamping squares are a very scientific and....
  • Best choice for your box woodworking work. We provide a one-year warranty service and opened a 24-hour customer service hotline.It is a unique gift....
Check Stock