Reviews Vertical Warping Board

Bamboogle Food Grade Mineral Oil For Cutting Boards - No Mess Cutting Board Oil With Easy Applicator

  • ...eral oil with lemon and orange essential oils, to give a wonderful fresh scent but also because the citric acidity opens the pores of the wood fibers even more, allowing maximum absorption for beauty and protection..
  • Restores & Protects Wood Cutting Boards - Hydrates, seals and penetrates deeply into wood to prevent warping, cracking, drying & rotting!.
  • Apply a generous amount of mineral oil to the entire surface of the board and let it soak in overnight. This will make the board much more moisture resistant, while keeping the wood lubricated enough to avoid drying out and warping..
  • Bamboogle Butcher Block Oil penetrates wood fibers for Extra protection and revitalizing appearance of wooden kitchen utensils. Wood should look good!.
  • Proudly Made in USA - lemon & orange food safe mineral oil is subtle & natural, keeps wooden cutting boards fresh and rich looking..
  • 5 fl. oz cutting board oil will last 12-18 months in most kitchens! Larger bottles of oil will likely get lost or tossed out before you even use the whole bottle..
  • Save yourself some time and money with an easy to use cutting board oil that gets the job done in seconds..
Check Stock

Atomik Climbing Holds Ninja Board | Ninja Warrior Grip Trainer Peg Board Vertical Limit Cliffhanger Station | RED and Black

  • When it’s time to “Go big” with your grip training regimen, this is the product for you.
  • The Ninja Board is a collaboration between the First American Ninja Warrior Geoff Britten and Atomik. Our goal was to offer as many grips as possible that ninjas encounter on courses..
  • The Ninja Board has: Vertical Limit (1cm and 2cm) Cliffhanger (1″, 1.5″, 2″) Pegboard (8 locations that use Atomik’s 1-1/4″ pegs) Pull-ups (2 t-nut locations so you can change the hold) Eyebolts (2 locations to use HANGING PRODUCTS) Slopers (Beginner 105 degrees, Expert 115 degrees).
  • The Ninja Board comes with: The above-specified grips that are part of the molding process. A pair of 2″ Vertical Pipe Bombs A pair of slings and quick-links that you girth-hitch the eye bolts. Two 4″ balls to bolt to the upper left and right of the board. A 5/16 L-Bar wrench for the 4″ balls. 4″ TORX screws to attach the board to your structure. TORX bit Two wood pegs that measure 1-1/4″ x 7″.
  • The Ninja Board measures: 29″ wide x 15″ tall x 3″ off the wall The board requires an area of 29″ wide x 12-1/2″ tall to mount. The protruding Vertical Limit section at the bottom of the board MUST o....
Check Stock

Artcast

  • COMPATIBILITY: It can be mounted on the tripod, monopod and other devices with 1/4 inch or 3/8 inch screw, or standard clamp, it is flexible and stable.
  • QR plate with standard 1/4inch screw and anti-slip rubber pad, it is easy to install your camera and keep it safe (Max Load 22 Pounds).
  • VERTICAL 360 DEGREE ROTATION: Composed of 3 independently adjustable boards (horizontal board, vertical board, camera loading board). The built-in stainless steel teeth disc locking design on the vertical board can be adjusted vertically 360 degrees.
  • HORIZONTAL 360 DEGREE ROTATION: Ball head on the horizontal supports 360 degree panning movement with calibrated precision for capturing panoramic overlapping images in horizontal direction. 5 different degree stop increments: 15°/ 30°/ 45°/ 60°/ 90°, stops around n24/ n12/ n8 / n6/ n4. It does not need to look down at the scale when shooting.
  • PLEASE NOTE: Please adjust the position of your camera lens before shooting: The lens node (lens optical center) must be adjusted to coincide with the axis centre of the vertical board and the horizontal board.
  • So the camera’s shooting node can be around a fixed point in 3D space and then the image captured by the camera can be pieced together using....
Check Stock

Counter Top Open/Closed Message Board Signs Package

  • 3 Complete Counter Top Message Board Sets.
  • Includes (1) 10"x 14" message board, (1) 14"x20" counter/wall message board, and (1) open/closed message board sign..
  • Comes complete with interchangeable letters - never run out of letters again..
  • If you do not specify we will ship vertical 14"h x 20"w.
  • Vertical or Horizontal Message Board (send message thru Amazon).
Check Stock

Kraus KCB-101BB Kore Cutting Board, 17' x 12 1/2'

  • OVER-THE-SINK CUTTING BOARD maximizes kitchen workspace by turning the area over your sink into an extension of the countertop..
  • EASY CLEAN-UP: Brush debris straight into the drain or garbage disposal to keep your workspace clean – NON-SLIP DESIGN prevents the board from moving while you work.
  • ORGANIC BAMBOO is sustainable and highly durable, with a naturally non-porous surface that is resistant to odors and stains.
  • DURABLE CONSTRUCTION: Heavy-duty cutting board is not prone to cracking or warping over time.
Check Stock

Transon 6-Pack Round Canvas Panel for Painting 12inch

  • 100% duck cotton canvas panel board. Triple layer primed acid-free , ready to paint directly..
  • Round shape canvas, diameter: 12 inch. Suitable for artist painting, art project, DIY, etc..
  • Suitable for multiple paint medium: acrylic, oil, gouache, etc. Not suitable for MASSIVE paint covering or POURING painting..
  • Pack of 6 pieces round painting canvas panel..
Check Stock

Neewer Gimbal Head Panoramic Head Camera Tripod Head Aluminium Alloy with Standard 1/4 inch Quick Release Plate and Carry Bag Max Load 22 Pounds Compatible with Nikon Canon Sony DSLRs

  • COMPATIBILITY: It can be mounted on the tripod, monopod and other devices with 1/4 inch or 3/8 inch screw, or standard clamp, it is flexible and stable.
  • QR plate with standard 1/4inch screw and anti-slip rubber pad, it is easy to install your camera and keep it safe (Max Load 22 Pounds).
  • VERTICAL 360 DEGREE ROTATION: Composed of 3 independently adjustable boards (horizontal board, vertical board, camera loading board). The built-in stainless steel teeth disc locking design on the vertical board can be adjusted vertically 360 degrees.
  • HORIZONTAL 360 DEGREE ROTATION: Ball head on the horizontal supports 360 degree panning movement with calibrated precision for capturing panoramic overlapping images in horizontal direction. 5 different degree stop increments: 15°/ 30°/ 45°/ 60°/ 90°, stops around n24/ n12/ n8 / n6/ n4. It does not need to look down at the scale when shooting.
  • PLEASE NOTE: Please adjust the position of your camera lens before shooting: The lens node (lens optical center) must be adjusted to coincide with the axis centre of the vertical board and the horizontal board.
  • So the camera's shooting node can be around a fixed point in 3D space and then the image captured by the camera can be pieced together using a....
Check Stock

Commercial Plastic Cutting Board NSF, Extra Large - 24 x 18 x 0.5 Inch (White)

  • Superior High Density Polypropylene vs Standard Poly (Polyethylene) Boards. BPA Free.
  • Dishwasher Safe – High Heat Ready For Food Service and Restaurants and Resists warping..
  • Textured Anti-Slip Surface – Helps Prevent Sliding While Prepping.
  • Commercial Grade Extra Large Plastic Cutting Board with NSF Certification.
Check Stock

Kenmore Kenosha Heavy Duty Acacia Wood Extra Large Cutting Board W/Juice Grove 24x16-inch

  • Heavy and Stable: this large 24 x 16-inch cutting board is made from solid Acacia wood which can withstand chopping and pounding without warping or splitting..
  • Won't dull knives: plastic cutting boards can harm knives. This top grade Acacia wood cutting board is gentle on blades so knives stay sharper, longer.
  • Hardened wood surface is less porous and resists stains wipes clean with a soapy cloth.
  • Presentation Platter: beautiful Acacia wood performs in the kitchen but also looks great as a serving board for meats and doubles as a charcuterie board for cheeses.
  • Juice Drip Grooves: deeply incised grooves along the edges prevent meat, fruit, and veggie juices from making a mess.
Check Stock

ANFU Cutting Board Feet, Feet for Countertop Cutting Board, Wooden Cutting Board Feet Kit to Skid-Proof or Elevate Cutting Board

  • Cutting board feet set- 2 pcs wood cutting board feet with Skid-Proof washers to ensure tight and stable fit Cutting board (Not included Cutting Board).
  • Materia: Made of wooden cutting block feet not only for the hardwood aesthetic but also for qualities of superior stability in temperature fluctuation and water resistance.
  • Features: easy matches different size chopping block, can be installed and disassembled at any time, increase more use space, best to solve the problem of small kitchen space.
  • Easy to install and remove: install the feet on the cutting board, no need any tool, durable and reusable. as picture 3.
  • Feet for cutting boards, raising chopping block off wet surface will keep it from warping, keep proper air circulation for the longevity of your cutting board.
Check Stock

Walnut Wooden Feet for Cutting Board - Kit to Elevate and Skid-Proof Your Cutting Board - Matches Your Chopping Block or Cutting Board

  • EASY TO INSTALL - We have instructions to guide you through the installation process. Only a Phillips screwdriver is needed..
  • ADDS STABILITY AND FUNCTIONALITY - adding our wood feet with rubber bumper will help anchor your cutting board to quartz, marble or smooth countertop..
  • ELEVATE YOUR CUTTING BOARD TO NEW HEIGHTS - adding legs will make your cutting board into a beautiful serving piece as well as enhance it's overall functionality..
  • EXTEND THE LIFE OF YOUR CHOPPING BLOCK - raising your chopping block or cutting board off wet surface will keep it from warping. Proper air circulation is a must for the longevity of your cutting board..
  • CORROSION-PROOF SCREWS ARE PROVIDED to fasten each foot securely. A slight modification will be made to your cutting board. We use the smallest screw possible so there is the least modification to your board..
Check Stock

Acacia Wood Cutting Board, Large Wooden Chopping Boards With Handle For Kitchen -19.69 inch,

  • This charcuterie cutting board made from natural organic acacia wood Easy to hold, The backside is perfect and carry around the kitchen for serve as a cheese cutting board, charcuterie board for slicing bread, fruits, vegetables, meats, cheeses in the party,which lasts for years..
  • Exquisite craft makes this cutting board very durable and strong, but not overly thick. After meticulous polishing, it is very smooth and extremely flat, without any burrs, cracks, splinters, etc..
  • This acacia cutting boards're housewarming gifts for new home buyer’s. It can be turned into a Turn into a Japanese charcuterie board for for arranging plates for the dishes you prepare, cheese, meat or your favorite food..
  • Ergonomic handle- This acacia cutting board features an ergonomic, non-slip handle that makes it easy to hold the cutting board as you put chopped ingredients into the cooking pot. This ensures your countertops stay clean and tidy..
  • Easy to clean: Handwash under running water. Do not place in a dishwasher.it will easily damage the surface texture and durability of the cutting board, Always store it in a cool dry place.Please oil regularly to avoid warping and cracking..
Check Stock

ANFU Cutting Board Feet, Wood Feet for Countertop Cutting Board- Kit to Elevate and Skid-Proof Your Cutting Board (Beige)

  • Cutting board feet set- 4 pcs adjustable length wooden screws cutting board feet with self tapping screws and washers to ensure tight and stable fit Cutting board ((Not included Cutting Board).
  • Materia: Made of wooden cutting block feet not only for the hardwood aesthetic but also for qualities of superior stability in temperature fluctuation and water resistance, easy matches your different size chopping block.
  • Adjustable cutting board feet: Multiple heights can be adjusted and two installation methods, increase more use space, best to solve the problem of small kitchen space..
  • Easy to install- Position and mark where you would like to install the feet at.
  • tear off the adhesive tape and fit on the chopping block or install these screw on feet with the provided self tapping screws, as picture 4.
  • Feet for cutting board, raising chopping block off wet surface will keep it from warping, keep proper air circulation for the longevity of your cutting board.
Check Stock