Reviews Vertical Pump Motor

The Bundling Off L116T Light and 2m ac Adapter

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6....
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI.....
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine....
Check Stock

B BURCAM QUALITY PUMPS SINCE 1978 506538SSZ 3/4HP Stainless Steel Shallow Well Jet Pump System

  • CORROSION RESISTANT JET PUMP BODY: Drink cleaner water with corrosion resistant stainless steel pump body..
  • INDUSTRIAL TYPE MOTOR: 115/230 Volts Fan cooled industrial motor factory preset 30/50 pressure switch with pressure gauge included..
  • SHALLOW WELL JET PUMP: This pump can be used for a shallow well application with a maximum vertical lift of 25 feet..
  • STAINLESS STEEL PRESSURE TANK: 16 gal stainless steel tank has a synthetic butyl rubber bladder for reliability and long lifespan. There is neither water-air contact nor water-tank contact..
  • STATE OF THE ART JET PUMP SYSTEM: Complete stainless steel pump and pressure tank to deliver the highest quality water without any corrosion in the pump system..
Check Stock

B BURCAM QUALITY PUMPS SINCE 1978 506547SSZN 3/4HP Stainless Steel Shallow Well Jet Pump System

  • CORROSION RESISTANT JET PUMP BODY: Drink cleaner water with corrosion resistant stainless steel pump body..
  • INDUSTRIAL TYPE MOTOR: 115/230 Volts Fan cooled industrial motor factory preset 30/50 pressure switch with pressure gauge included..
  • SHALLOW WELL JET PUMP: This pump can be used for a shallow well application with a maximum vertical lift of 25 feet..
  • STAINLESS STEEL PRESSURE TANK: 6.6 gal stainless steel tank has a synthetic butyl rubber bladder for reliability and long lifespan. There is neither water-air contact nor water-tank contact..
  • STATE OF THE ART JET PUMP SYSTEM: Complete stainless steel pump and pressure tank to deliver the highest quality water without any corrosion in the pump system..
Check Stock

The Prophecy Vol. 2

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, equipped with safety switch.
Check Stock

Little Giant EC-400, 2.5 GPH In-Pan Condensate Removal Pump (115V)

  • Product 1: AUTOMATIC HVAC PUMP: Ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where automatic drain pump is required.
  • Product 1: STAINLESS STEEL MOTOR SHAFT: Vertical-type pump features stainless steel motor shaft and galvanized steel tank cover.
  • Thermally protected motor is UL and CSA listed.
  • Includes two 1-1/8” diameter inlet openings.
  • Product 1: PUMP WITH SAFETY SWITCH: Includes safety switch which can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • Discharge is a 1/4" FNPT or 3/8" O.D. barbed tubing adapter.
  • Product 2: SimpleAir’s Clean Flow Tabs are a simple method to maintain free-flowing drain lines associated with all HVAC systems.
  • Product 2: Unique tablets are time released when water activated.
  • Product 2: Tabs prevent common growth in drain lines that could lead to clogging of drain lines and overflow.
  • Product 2: Each tablet lasts up to 2 months.
Check Stock

The ROP Shop | VRO Conversion Fuel Pump for Johnson, Evinrude, OMC, BRP 5004558, 0438400 Engine

  • The ROP Shop replacement VRO Conversion Fuel Pump for Johnson, Evinrude, OMC, BRP 5004558, 0438400 Engine.
  • Specs - Refer to images 2 & 3 for more information.
  • Includes - (1) Vertical Ratio Oil Injection Conversion Fuel Pump.
  • Fits: V4 & V6 Crossflow and Looper outboard engines with 90° angle cylinder block. Does not fit 60° or 3 cylinder applications. Crossflow engines have shaped piston tops, Looper engines have flat top pistons. The 90° motor will have a more triangular profile, while the 60° motor is more rounded.
  • This is a Pre-Mix VRO Conversion Fuel Pump Kit. It replaces the original VRO fuel pump and now mixes the fuel and oil in the fuel tank instead.
Check Stock

Comet ZWD 4040G Pressure Washer Pump 4 GPM 4000 PSI For 1\ Hollow Shaft Engines (Fully Plumbed with Unloader External Bypass)

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI. Pump head can be flipped.
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress.
Check Stock

Dayton 1TDT2 Blower, 549 CFM, 115V, 2.05 Amp, 1640 RPM

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, equipped with safety switch.
Check Stock

The ROP Shop | VRO Conversion Fuel Pump for 1991 Evinrude, Johnson 120 HP J120TXEIE, J120TLAIE

  • The ROP Shop replacement VRO Conversion Fuel Pump for 1991 Evinrude, Johnson 120 HP J120TXEIE, J120TLAIE.
  • Specs - Refer to images 2 & 3 for more information.
  • Includes - (1) Vertical Ratio Oil Injection Conversion Fuel Pump.
  • Fits: V4 & V6 Crossflow and Looper outboard engines with 90° angle cylinder block. Does not fit 60° or 3 cylinder applications. Crossflow engines have shaped piston tops, Looper engines have flat top pistons. The 90° motor will have a more triangular profile, while the 60° motor is more rounded.
  • This is a Pre-Mix VRO Conversion Fuel Pump Kit. It replaces the original VRO fuel pump and now mixes the fuel and oil in the fuel tank instead.
Check Stock

Acquaer 1/3 HP Submersible Water Pump 2160GPH Sump Pump Thermoplastic Utility Pump Portable Electric Water Pump Water Remove for Basement Hot Tubs Garden Pool Cover Draining with 10 ft Cord

  • 【EXCELLENT DRAINING PERFORMANCE】High-efficiency submersible utility pump with 1/3 HP power motor. Draning water up to 2160 Gallons Per Hour( 36 gallons per minute) at 5ft. Lifts water up to 33.5 ft of vertical height. Drain Pump with 10ft power cord and pure copper wire motor, energy efficient and high productive, perform well in drainage..
  • 【REINFORCEMENT MATERIALS】 Submersible pump is made of thermoplastic material, which reinforced its durability and corrosion resistance. Unique ergonomic handle and apperance design for easy portablity. Compact size and lightweight for easy storage. Utility pump runs quiet and stable, fits for household and outdoor occasions..
  • 【WIDE APPLICABILITY】Submersible pump can be operated easily by plugging into the power supply. Suitable for draining water from swimming pool covers, basements, pits, ponds, window wells, rain barrels or other flooded areas. Utility pump is also perfect for irragating, garden watering, car washing and other home requirement..
  • 【DETACHABLE SCREEN & ADAPTER】Submersible utility pump with detachable bottom screen design, filters debris, protect water pump from damage and remove water down to 1/4 in of surface. The drain pump comes with 3/4" garden hose adapter. 1-1/4" NPT discharge fo....
Check Stock

Acquaer Submersible Water Pump 1/6 HP Sump Pump Thermoplastic Utility Pump Small Electric Water Pump 1750GPH Water Remove for Basement Hot Tubs Garden Pool Cover Draining with 10 ft Cord

  • 【EXCELLENT DRAINING PERFORMANCE】: High-efficiency submersible utility pump with 1/6 HP power motor. Draning water up to 1760 Gallons Per Hour( 29.3 gallons per minute) at 5ft. Lifts water up to 29.5 ft of vertical height. Utility pump with 10ft power cord and pure copper wire motor, energy efficient and high productive, perform well in drainage..
  • 【REINFORCEMENT MATERIALS】: Submersible pump is made of thermoplastic material, which reinforced its durability and corrosion resistance. Unique ergonomic handle and apperance design for easy portablity. Compact size and lightweight for easy storage. Drain Pump runs quiet and stable, fits for household and outdoor occasions..
  • 【WIDE APPLICABILITY】: Submersible pump can be operated easily by plugging into the power supply. Suitable for draining water from swimming pool covers, basements, pits, ponds, window wells, rain barrels or other flooded areas. Utility pump is also perfect for irragating, garden cleaning, car washing and other home requirement..
  • 【DETACHABLE SCREEN & ADAPTER】: Submersible utility pump with detachable bottom screen design, filters debris, protect water pump from damage and remove water down to 1/4 in of surface. The drain pump comes with 3/4" garden hose adapter. 1-1/4" NPT....
Check Stock

NorthStar Portable Electric Air Compressor —-1.6 HP, 30-Gallon Vertical, 5.3 CFM

  • Heavy-duty 1.6 HP, 15 Amp induction motor for maximum performance and efficiency.
  • Durable cast iron V-twin pump provides good heat dissipation and no transfer of heat between cylinders.
  • Belt drive oil-lubricated pump runs quietly and delivers long pump life.
  • 30-gallon vertical tank is ASME certified.
  • 10in. pneumatic wheels for easy portability.
Check Stock

Little Giant VCMA-15ULS 115 Volt, 65 GPH, 1/50 HP Automatic Condensate Removal Pump with Safety Switch, White/Black, 554405

  • AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
  • THERMALLY PROTECTED MOTOR: 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, fan-cooled motor.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
  • 115 Volts, 1 Amp, 60 Watts, 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, 6-foot cord.
  • maximum water temperature: 140 F, safety switch included.
Check Stock