Reviews Vent Valve

Oatey 39017 Sure-Vent AIR ADM Valve 1-1/2-Inch by 2-Inch White

  • SURE-VENT PVC AIR ADMITTANCE VALVE: Provides the ideal venting solution for island sinks, remote bathroom groups, and remodel jobs by eliminating the....
  • EQUALIZES PRESSURE: Keeps the sewer and atmospheric pressures equalized, allowing water to drain freely.
  • ONE-WAY VALVE: Allows air to enter the plumbing drainage system when negative pressures develop without the use of a vent extended to open air and to....
  • SENSITIVE TO PRESSURE CHANGES: Closes by gravity and seals the vent terminal at zero differential pressure (no flow conditions) and under positive....
  • SPECIFICATIONS: 1.5" x 2" size is approved to handle up to 3" vent pipe and has a 24 DFU (Drainage Fixture Unit) capacity, and complies to ASSE....
Check Stock

Blow off valve mod plug Turbo Hiss compatible for ford 13-21 F150 Ecoboost 3.5l 2.7l VTA(black)

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temp....
Check Stock

Air Intake Filter,Akozon 13mm/0.5in Mini Air Intake Filter Vent Crankcase Breather Universal Car Accessory(Noire )(black) for crankcase vent filter

  • APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 13 mm/0.5 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter for pcv breather filter.
  • APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 0 mm/1 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter.
  • EXCELLENT FUNCTION: The car air filter can increase the intake air flow, filter the impurities in the air, make the engine breathe more smoothly, prevent the dust suspended in the air from being sucked into the cylinder, and reduce the wear of the piston group and the cylinder. for 7/8" crankcase vent filter for d16 valve cover intake.
  • UNIQUE DESIGN: The unique shape reduces the air intake resistance of the engine and improves the air intake and volumetric efficiency per unit time when the engine is running. for valve cover breather for k n crankcase filter.
  • HIGH-QUALITY MATERIALS: The car air filter is made of Nonwoven Fabric, which is very breathable, very durable, and has a long service life, which enhances the ability of car air filtration. for crankcase breather filter for 301 predator valve vent filter.
Check Stock

Hoffman Steam Air Vent 401422 1A 1/8 Adjustable Angle Steam Radiator Air Valve

  • Adjustable port for true proportional venting v 6 port settings from slow (1) to fast (6.
  • 1/8" npt angle connection maximum operating pressure 1 1/2 psig (0.1 bar).
Check Stock

Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....
Check Stock

PCV Crankcase Breather Ventilation Valve Hose Gaskets for VW Jetta Passat GTI Audi TT A3 A4 2.0T 06F129101P

  • 【Compatible With】2006-2008 Audi A3 2006-2009 Audi A4 2009-2015 Audi TT Quattro 2007-2009 VW Eos 2006-2008 VW GTI 2007-2008 VW Jetta Passat 2006-2009 VW Rabbit.
  • 【Replacement for】06F129101P, 06F129101E, 06F129101G. Please check the part numbers whether it suits your vehicle before purchasing..
  • 【Package Including】This crankcase vent valve breather hose kit includes Pressure Control Valve (PCV), Breather Tube, PCV & Breather Tube Gaskets,Breather Tube Clamp.
  • 【Functions】TOP quality Engine Crankcase Vent Valve, also known as PCV Valve or Oil Separator, works to evacuate gas from the crankcase of the engine, improving emissions and the overall operation of your vehicle..
  • 【NOTICE】 Please properly verify the Year/Make/Model before purchasing this product.If you have any questions with crankcase for Volkswagen, please do not hesitate to contact us..
Check Stock

Advantec 353130 Vacuum Filtration Manifold Stainless Steel 3-Branch with 3-Way Valves

  • Three-way valve enables you to vent the branch to atmosphere without breaking the vacuum connection|three-way valve vent is a female luer slip connection to accept a standard syringe filter.
  • Two- and three-way valves feature ptfe stopcocks for smooth control|valves provide independent control at each branch for vacuum and venting|connect three or six filter holders to one vacuum source.
Check Stock

Part# 06H145710D Turbo Diverter Valve For A3 A4 TT Quattro Volkswagen Jetta Passat Beetle CC Eos GTI - Replace Part Number 06F145710G

  • The diverter valve is usually located on the side of the turbocharger. The purpose of the diverter valve is to vent excess boost when the throttle is closed (you lift off the accelerator or change gear). Without venting this excess pressure, the turbo experiences surge which is actually damaging to the turbo..
  • By the same token, when the throttle is open and you are building boost, this valve must stay shut and not vent boost from the high pressure side to the low pressure side. Venting this boost under wide open throttle causes a boost leak and a drop in power..
  • This Turbo Drivter Valve fits for 2006 - 2011 A3, 2010 - 2013 A3 Quattro, 2005 - 2013 A4 , 2005 - 2013 A4 Quattro, 2008 - 2009 TT, 2009 - 2011 TT Quattro, 2009 - 2011 Volkswagen CC 2.0L L4, 2007 - 2011 Volkswagen Eos, 2006 - 2011 Volkswagen GTI, 2006 - 2010 Volkswagen Jetta, 2006 - 2010 Volkswagen Passat, 2012 Volkswagen Beetle 2.0L..
  • Customers also can find the product you need accurately according to the OE number. OEM Number: 06H 145 710 D, 06F 145 710 G, 06F 145 710 C, 06F 145 710 B, 06H145710D, 06F145710G, 06F145710B, 06F145710C..
  • If the valve is defective or inadequate, you will get a loss of boost, extended lag or a throttle response that is sluggish, the turbo charger will wear out soon ....
Check Stock

Class A Customs 40 Gallon RV Waste Black Water Holding Tank WT-4000

  • 40 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 27 Gallon RV Waste Black Water Holding Tank WT-2700

  • 27 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 14 Gallon RV Waste Black Water Holding Tank WT-1400

  • 14 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 31 Gallon RV Waste Black Water Holding Tank WT-3100

  • 31 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 30 Gallon RV Waste Black Water Holding Tank WT-3000

  • 30 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock