Reviews Vector Signal Analyzer

NanoVNA-H REV3.4 Vector Network Analyzer,10KHz -1.5GHz HF VHF UHF Antenna Analyzer Portable VNA with SMA Adapter

  • NEW UPGRADED VERSION: This Vector Network Analyzer added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with....
  • IMPROVED HIGH ACCURACY: HF VHF UHF Antenna Analyzer Measuring added a shell case, which is protective and dust-proof.The metal shield is designed to....
  • IMPROVED FREQUENCY ALGORITHM RANGE: Frequency range is 10KHz -1.5GHz .The improved frequency algorithm can use the odd harmonic extension of si5351 to....
  • MINI & PORTABLE:Upgraded NanoVNA that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 2.8-inch LCD....
  • WHAT CAN YOU GET: Upgraded NanoVNA hostx1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA....
Check Stock

[2022 Upgraded] AURSINC NanoVNA-H4 V4.3 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF 4'' Portable Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

  • ✔️[2022 Upgraded Nanovna-H4 HW V4.3 ] Latest features: with latest HW 4.3 version, Nanovna-H4 is added a brand new panel plus added a new SD port for data storage(support up to 32GB memory card, not included in the package). The NanoVNA-H4 vector network analyzer is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAh battery powered or USB powered.
  • ✔️[Improved Frequency Algorithm] The improved frequency algorithm of NanoVNA-H4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.
  • The metal shield is designed to reduce the external interference and improve the measurement accuracy.
  • ✔️[Antenna Performance Measurement] The default firmware main function for NanoVNA-H4 vector network analyzer is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port ....
Check Stock

CC Vector Extended Long Range WiFi Receiver System - Works with All Devices - Receives Distant WiFi and Repeats to All WiFi Devices in a New Location 2.4GHz

  • This durable parabolic antenna receives a distant available WiFi signal about 1/2 mile away (max. range is about 3 miles*). When connected to our CC Vector it repeats a new WiFi signal in a dead zone like your barn, shop, office, or other building. It works with ALL devices. Range depends on obstructions, signal strength and speed of the network you are connecting to. It is a good long range WiFi solution for connecting a remote location to a distant router and saving Internet expenses..
  • The system uses a directional 15 dBi parabolic antenna which reduces interference from other WiFi networks. The heavy-duty antenna with stainless hardware mounts outdoors (mast not included) to a fixed location and then is wired to the CC Vector inside. The CC Vector then delivers a new reliable WiFi signal to a new area for all types of devices. This is great solution for a metal building which normally blocks a WiFi signal..
  • It repeats a WiFi Signal to Multiple Devices such as: gaming consoles, Windows, Android, Apple, iPhone and Smart TVs, internet radios and more. There are also two available Ethernet jacks on the CC Vector for hard wiring additional computers or routers. It uses the most popular long distance 2.4 GHz WiFi band. It also supports 5 GHz for shorter r....
Check Stock

C. Crane CC Vector RV Long Range WiFi Repeater System 2.4 GHz- Extends Distant WiFi to All Devices in Your RV, Boat or Big Rig

  • The omni-directional outdoor antenna receives a distant available WiFi signal about 400 ft (max. range is about 1 mile*). The CC Vector RV Long Range booster repeats a new WiFi signal to all devices in your RV, boat, or Big Rig. Great for extending your range at campgrounds, RV Parks, or remote outbuildings..
  • Repeats WiFi signal to multiple devices such as: Gaming consoles, Windows, Android, Apple, iPhone and Smart TVs, internet radios and more. There are two available Ethernet jacks on the CC Vector for hardwiring additional computers or routers. It uses the most popular and longest range WiFi band at 2.4GHz. It also supports 5 GHz for shorter ranges. C. Crane designed setup is simple and easy for basic computer users..
  • The heavy-duty system mounts outside of your RV (mast/pole not included) to a pole or ladder and then connects to the CC Vector inside. The included 8dBi antenna is wired to the CC Vector which transmits and receives a new reliable WiFi signal to all types of WiFi devices..
  • The CC Vector Long Range is capable of supporting two users watching SD (standard definition) quality Netflix or several users browsing the internet simultaneously. As distance is increased, speed is reduced..
  • Includes the CC DX Mile Long Range Omni 8dBi Antenna, CC V....
Check Stock

Gigabit Wireless Bridge Point to Point Outdoor, 5.8G 1Gbps ULNA WiFi Bridge CPE with 16dBi High-gain Antenna, Long Range Up to 3km, 27dBm, 24V POE Power, Ip65 Waterproof, 2-Pack

  • This durable parabolic antenna receives a distant available WiFi signal about 1/2 mile away (max. range is about 3 miles*). When connected to our CC Vector it repeats a new WiFi signal in a dead zone like your barn, shop, office, or other building. It works with ALL devices. Range depends on obstructions, signal strength and speed of the network you are connecting to. It is a good long range WiFi solution for connecting a remote location to a distant router and saving Internet expenses..
  • The system uses a directional 15 dBi parabolic antenna which reduces interference from other WiFi networks. The heavy-duty antenna with stainless hardware mounts outdoors (mast not included) to a fixed location and then is wired to the CC Vector inside. The CC Vector then delivers a new reliable WiFi signal to a new area for all types of devices. This is great solution for a metal building which normally blocks a WiFi signal..
  • It repeats a WiFi Signal to Multiple Devices such as: gaming consoles, Windows, Android, Apple, iPhone and Smart TVs, internet radios and more. There are also two available Ethernet jacks on the CC Vector for hard wiring additional computers or routers. It use....
Check Stock

Bingfu SMA Male to UHF SO239 Female & PL259 Male RG58 Coaxial Jumper Cable 12 inch 30cm (2-Pack) for Portable VNA Vector Network Analyzer Antenna Analyzer Spectrum Analyzer SWR Meter Tester

  • Compatible with: Antenna Adapter Cable for Ham Radio, Amateur Radio, Handheld Floating Marine VHF Radio, Two Way Radio, Walkie Talkie, USB RTL SDR Receiver.
  • Compatible with: Test Probe Coaxial Jumper Cable for Handheld RF Explorer, SWR Meter, VNA Vector Network Analyzer, Antenna Analyzer, Spectrum Analyzer.
  • Package List: 2 x Cable (As the Picture Shown).
Check Stock

Bingfu Ham Radio Antenna Adapter SMA Male to UHF SO239 Female RG58 Coaxial Jumper Cable 1m 3 feet for Two Way Radio Handheld Marine VHF Radio RTL SDR Receiver Portable VNA Vector Network Analyzer

  • Connector: UHF SO239 Female 50 Ohm Connector.
  • Compatible with: Antenna Adapter Cable for Ham Radio, Amateur Radio, Handheld Floating Marine VHF Radio, Two Way Radio, Walkie Talkie, USB RTL SDR Receiver.
  • Compatible with: Test Probe Coaxial Jumper Cable for Handheld RF Explorer, SWR Meter, VNA Vector Network Analyzer, Antenna Analyzer, Spectrum Analyzer.
  • Package List: 1 x Cable (As the Picture Shown).
Check Stock

CC Vector Long Range WiFi Receiver System – Repeats to All WiFi Devices at a Distant Location. Boost Coverage to Garage, Garden, Upstairs, Back Rooms, and More; 2.4 GHz

  • The omni-directional indoor/outdoor antenna receives a distant available WiFi signal for about 300 ft maximum range which depends on walls and obstructions. The CC Vector Home Long-Range booster repeats a new, stronger WiFi signal to all devices in your home, garage, office, garden and camping. Eliminate dead spots in rooms or anywhere on your property with weak WiFi coverage..
  • Repeats a WiFi signal to all devices such as: Gaming consoles, Windows, Android, Apple, iPhone and Smart TVs, internet radios and more. There are two available Ethernet jacks on the CC Vector for hard-wiring additional computers or routers. It uses the most popular and longest range WiFi band at 2.4GHz. It also supports 5 GHz for shorter ranges. The C. Crane designed setup is simple and easy for basic computer users..
  • C. Crane’s antenna can be located so it more favorably connects to a distant WiFi signal from your router. The system is small and can be mounted on a wall, to a window with suction cups or outside (water resistant IP65) for improved coverage and stability..
  • The CC Vector Long Range is capable of supporting two users watching SD (standard definition) quality Netflix or several users browsing the internet simultaneously. As distance is increased, speed is redu....
Check Stock

2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input,V0.4.5.1

  • ✅【2023 Upgraded TinySA Ultra】:This New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage..
  • ✅【Frequency Range】:Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields..
  • ✅【2 in 1 Multifunctional Frequency Analyzer & Signal Generator】:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration..
Check Stock

Portable TinySA Spectrum Analyzer, SEESII Upgraded V0.3.1 Tiny Frequency Analyzer with Antenna SMA Male to UHF Female Cables, 100kHz to 960MHz MF/HF/VHF UHF Input, 2.8'' Touchscreen Signal Generator

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use..
  • 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These co....
Check Stock

Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life..
Check Stock

NanoVNA 10KHz-1.5Ghz Vector Network Analyzer, Fit V3.4 HF VHF UHF，JUNSHUNTONG Voltage Standing Wave Ratio, Mini Antenna Analyzer Measuring S Parameters，Phase，SWR Meter，Smith Chart

  • 【Tiny DIY Product】 This Nanovna antenna analyzer is a DIY product, in the size of the credit card size as far as possible to provide perfect vector network measurement function. It contains a 2.8-inch touch screen, 450mah battery, which can be used offline for 3 hours..
  • 【Accurate,Portable and Easy to handle】 This tiny vector network analyzer is a truly handheld and measurement licensed microwave band, and consists of original equipment, which is dedicated to its own frequency range and reasonable price..
  • 【Fit 10KHz-1.5GHz Frequency 】 Battery powered spectrum compact equipment does not need an external down converter or connection with a PC. It is a necessary tool for any field engineer to perform microwave equipment installation, link troubleshooting, site planning and maintenance in the field environment..
  • 【Metal Shield】The metal shield is designed to reduce external interference and improve the measurement accuracy. Its frequency algorithm can be extended to 900MHz with the odd harmonics of si5351. The direct output 50k-300mhz band can provide better than 70dB dynamic, the expanded 300m-600mhz band can provide better than 50dB dynamic, and the 600m-900m band can provide better than 40dB dynamic..
  • 【Note】 Free software is available wh....
Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Handheld Frequency Analyzer V0.3.1 with Antenna SMA Male to UHF Female Cables & 30db Attenuator MF | HF | VHF UHF Input for 0.1MHZ-960MHz 2.8'' Touchscreen

  • [2022 Upgraded Version: ESD Protection Diodes] Produced by Hugen, portable spectrum analyzer with latest firmware V0.3.1, the displayed version info is "ESD protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. NOTE: Due to the old inventory might mix with the new batch, and If you got the old version Tiny spectrum analyzer and want a new one, you could apply a replacement for it..
  • [Frequency Range] Spectrum analyzers like the Tiny spectrum analyzer use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The Tiny spectru....
Check Stock