Reviews Valve Sealing Components

Moroso 62391 0-400 lbs Valve Seat Pressure Tester

  • All-In-One Solution - COMP Cams Spring Seat and Seal kit offers a convenient kit for replacing the seats and seals on your GM LS engine..
  • Beehive Ready - The 528-KIT Spring Seat and Seal Kit is ready to accept the GM LS6 and COMP Cams LS6+ Beehive Valve Springs..
  • Quality Components - The 528-Kit Seat and Seal Kit is made of quality components that ensures durability and dependable sealing capabilities..
Check Stock

Sub-Zero Synthetic Automotive Refrigerant R-134a (18 ounces)

  • R134a KIT - Kit contains (2) 18oz cans of R134a refrigerant with stop leak and a reusable can tap with gauge. A total of 36oz of R134a is enough to recharge almost every vehicle, just 18oz is not enough if you have a completely empty system..
  • STOP LEAK - The stop leak in this kit is good for sealing leaks in rubber components such as o-rings. This is a basic stop leak and can not repair more severe leaks. Products like ZeroR Max Seal are much stronger and can even repair leaks in metal components..
  • CAN TAP & GAUGE - Reusable can tap and gauge for similar EZ Chill products. Note, this is NOT a universal can tap and can not work on common R134a threaded products. For a truely universal can tap check out the ZeroR brand of tools and refrigerants..
  • INSTRUCTIONS - Steps on product should be followed closely. With vehicle running and AC set to Max Cool, connect can to low side service port. Dispense refrigerant into system in short bursts, checking the gauge in between dispensing for proper charging levels..
  • LEGAL - Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans. R134a Refrigerant for MVAC use in 18oz self sealing valve cans..
Check Stock

FEL-PRO MS 96672 Intake Manifold Gasket Set

  • THIS IS BRAND NEW: DNJ® Head Gasket Set.
  • FITS: 04-07 Chrysler, Dodge, Jeep, Mitsubishi 4.7L V8 SOHC Naturally Aspirated.
  • FITMENT NOTES: Premium Sealing Solution, Valve Grind Set, w/o HI-OUTPUT, w/ HI-OUTPUT.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

Honey Well Genuine 8oz R1234YF Refrigerant (3 Freon Cans) & HD Brass Can Tap with Gauge

  • R134a KIT - Kit contains (2) 18oz cans of R134a refrigerant with stop leak and a reusable can tap with gauge. A total of 36oz of R134a is enough to recharge almost every vehicle, just 18oz is not enough if you have a completely empty system..
  • STOP LEAK - The stop leak in this kit is good for sealing leaks in rubber components such as o-rings. This is a basic stop leak and can not repair more severe leaks. Products like ZeroR Max Seal are much stronger and can even repair leaks in metal components..
  • CAN TAP & GAUGE - Reusable can tap and gauge for similar EZ Chill products. Note, this is NOT a universal can tap and can not work on common R134a threaded products. For a truely universal can tap check out the ZeroR brand of tools and refrigerants..
  • INSTRUCTIONS - Steps on product should be followed closely. With vehicle running and AC set to Max Cool, connect can to low side service port. Dispense refrigerant into system in short bursts, checking the gauge in between dispensing for proper charging levels..
  • LEGAL - Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans. R134a Refrigerant for MVAC use in 18oz self sealing valve cans..
Check Stock

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

  • ...bility to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
  • The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
  • Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover..
  • Our valve core adapters are equipped with rubber sealing rings and sealing caps to ensure air tightness withou....
Check Stock

R134A Self-Sealing Can Tap with Right Hand Thread, R134A Valve Tool Bottle Opener with 1/2" Female R-H Thread and 1/4’’ SAE Male Connector, Fits for R134A Automotive Air Conditioning Charging

  • 【COMPATIBILITY】 -- This R134A self-sealing dispensing valve bottle opener fits for a self sealing 1/2" right hand thread for use with most R134A self-sealing/reusable designed cans. Please note there are two kinds for self-sealing can taps, R134A and R1234YF can tap, R134A self-sealing can tap with right hand threaded, but R1234YF self-sealing can tap with left hand threaded. Please check your can before purchase..
  • 【THREAD 】 -- R134A valve can tap connecting thread 1/4’’ SAE Male, interface thread 1/2’’ right hand female thread..
  • 【EASY INSTALLATION】 -- Aupoko R134A self-sealing valve can tap is designed with safety check valve, and easy to open R134a self-sealing can with valve to turn off to reserve for future use..
  • 【PREMIUM QUALITY】 -- The R134A self sealing can adapter is made of aluminum alloy with heavy-duty construction, with gasket protected to prevent leaks for durable use..
  • 【1 YEAR WARRANTY】 -- Order R134A self sealing can tap from Aupoko, we offer 1 YEAR WARRANTY, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time..
Check Stock

1 Inch Ball Valve, Premium 304 Stainless Steel Full Port Forged NPT Ball Valve for Water Oil and Gas with Long Handle Shut Off Switch, 1000 WOG ( 1 Piece, FNPT to FNPT )

  • ...h opens and closes quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Good sealing: It has two sealing surfaces with good sealing performance and can achieve complete sealing. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes..
  • Widely used: Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
Check Stock

DNJ HGS4345 Head Gasket Set For 12-15 Subaru Impreza, XV Crosstrek 2.0L H4 DOHC Naturally Aspirated FB20

  • THIS IS BRAND NEW: DNJ® Head Gasket Set.
  • FITS: 12-15 Subaru / Impreza, XV Crosstrek 2.0L H4 DOHC Naturally Aspirated FB20.
  • FITMENT NOTES: Premium Sealing Solution, Valve Grind Set.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

Ingersoll-Rand, 172L, Chisel Scaler, 9/16 In. Stroke, 12.0 CFM

  • Easy Adjustment: The adjustable bayonet-type needle housing lock allows for easy adjustment without special tools..
  • Durability: These scalers feature a rubber faced throttle valve to ensure positive sealing of internal components, along with a strengthened head block that will hold up in tough conditions..
  • Comfort: Compact, well balanced and low vibration maximize operators comfort.
Check Stock

DNJ HGS722 MLS Head Gasket Set for 2006-2014 / Saab Subaru / 9-2X Forester Impreza / 2.5L / DOHC / H4 / 16V / 2458cc / EJ255 EJ257

  • THIS IS BRAND NEW: DNJ® Head Gasket Set.
  • FITS: 06-15 Subaru, Saab / WRX STI, Impreza, Forester, 9-2X 2.5L H4 DOHC Turbocharged EJ257,EJ255.
  • FITMENT NOTES: Premium Sealing Solution, Valve Grind Set.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense....
Check Stock

Valve Cover with Gaskets - Compatible with 1999-2010 4.8L, 5.3L, 5.7L, 6.0L, 6.2L Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace 12570427 264-965

  • REPLACEMENT DRIVER SIDE VALVE COVER - TOP quality Engine Valve Cover, designed to protect the cylinder head, and its components, along with sealing oil flow. Our direct replacement engine valve covers are made to last. They're durable in design and provide a tight, lasting seal against oil leaks. Additionally, to ensure a longer service life..
  • FIT THE FOLLOWING VEHICLE - Compatible with 1999-2010 Chevy GMC Cadillac Buick Vehicles with 4.8L 5.3L 5.7L 6.0L 6.3L V8 engien. Including Chevy Silverado 1500 2500 3500, Suburban 1500 2500, Express 1500 2500 3500, Tahoe, Avalanche 1500 2500, Trailblazer, Camaro, Corvette, SSR, GMC Sierra 1500 2500 3500, Yukon, Savana 1500 2500 3500, Envoy, Cadillac Escalade, CTS, Buick Rainier, Pontiac GTO, Firebird..
  • REPLACE PART # - Replace GM 12570427, Dorman 264-965. Commonly found on 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 4.8L 5.3L 5.7L 6.0L 6.2L Vortec V8 engines, including Chevy, GMC, Cadillac, Buick, Pontiac, Hummer..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or ACDelco valve cover, but it works even better and lasts longer. Save yourself times and money by replacing valve cover yourself..
Check Stock

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

DNJ HGS965 MLS Cylinder Head Set for 1995-2004 / Toyota / 4Runner, T100, Tacoma, Tundra / 3.4L / DOHC / V6 / 24V / 3378cc / 5VZFE

  • THIS IS BRAND NEW: DNJ® Cylinder Head Set.
  • FITS: 95-04 Toyota / Tacoma, Tundra, 4Runner, T100 3.4L V6 DOHC Naturally Aspirated 5VZ-FE.
  • FITMENT NOTES: Premium Sealing Solution, Valve Grind Set, MLS Head Gaskets Included.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock