Reviews Valve Regulator

Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew

  • ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator.
  • The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve..
  • ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure..
  • ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice..
  • ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator..
  • ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to h....
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock

Motorcraft DPFE6 Exhaust Gas Recirculation Pressure Feedback Sensor

  • ...Econoline Club Wagon 97-02, fit for Ford E-550 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
  • [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
  • [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
  • [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in time. We will reply to you within 24 hours.
  • [Service + Package include] - You will get a 24-month shelf life for 7.3 IPR valve + ICP control sensor. If you have any questions, please contact us at any time, we....
Check Stock

Set

  • 1.Material: Heavy Duty Beer Regulator, Brass Body Chrome Plate Finish, anti-Corrosion, Two pcs of Washer and Hose Clamps will guarantee no Leak Problem.
  • 2.The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg.
  • 3.PERA Beer Keg Regulator with CGA-320 valve can be connected to American CO2 Tank, it is convenience used in Commercial Environments like Beer Bars, Restaurants, if you like home brewing, it is a best brewing tools.
  • 4.With 45 PSI safety relief valve and gas shut-off valve, it will be more safe and more precise control when making small adjustments to the output pressure.
  • 5.Guarantee: Quality Guarantee, any problem for the Beer Keg Gas Regulator, Money Back or Replacement free..
Check Stock

1\ HEAVY DUTY HIGH FLOW IN-LINE COMPRESSED AIR PRESSURE REGULATOR 180 CFM

  • CO2 pressure regulator has two valves to independently measure flow rate and remaining CO2 tank contents (CO2 tank sold separately).
  • Valves have dual-scale readings in psi and kg/cm.
  • Needle valve flow control provides precise flow adjustment and measurement.
  • Includes flow regulator, needle valve, electronic solenoid, and bubble counter.
  • NOTE:Kindly refer to the Regulator Set Up Procedure provided as a PDF manual in the product description section.
Check Stock

VULCAN-HART 3/4\ NPT Natural Gas Pressure Regulator 3\ to 6\ Water Column Range 408279-1

  • ...sure gauge is filled with high class silicone oil. The clarity, stability and seismic performance are higher than other gauge and it is not easy to fade. The gauge is filled with oil to prevent water intrusion and rust, and the sealing is stronger, the service life is prolonged..
  • [Lead Free Brass]: RV Water Pressure Regulator is tested strictly to meet NSF lead-free requirements of less than 0.25%, silver body, is different from other regulators, class C46500 LEAD-FREE BRASS treated by hot casting and plating double process technology, effectively inhibit bacterial growth, make the lead content of the RV regulator reach the minimum standard set by the market industry, which make it more safer and healthier..
  • [Dual-Layer Inlet Screened Filter]: RV Water Pressure Regulator is designed with 3/4 NH thread (hose thread or garden hose thread), compatible with All US water sources. The Dual-Layer inlet screened filter helps to filter particles like gravel, debris to prevent impurity blocking and valve body damage, bring you continuous water flow which is about 2-4 gallons per minute, and will not reduced the water flow rate..
  • [Adjustable Water Pressure Regulator]: RV Water Pressure Regulator adjust Water Pressure from 0-160PSI, different campsites have differe....
Check Stock

Shift Rite Transmissions replacement for 4L80E 1994-1996 Updated Transmission Valvebody MT1 Shift Rite 4L80E

  • This TCC regulator apply valve kit with a hard-anodized aluminum valve with PTFE seal prevents valve bore related problems..
  • Sonnax offers a replacement TCC regulator apply valve kit 34994-01K that will prevent valve-bore related problems..
  • Hard-anodized aluminum valve incorporates a PTFE seal at the main wear area of the bore to prevent oil loss..
  • The valve spool land at the spring end has been lengthened to provide greater bore-to-valve surface contact, thus further preventing leakage..
  • The valve spool has annular grooves to help center the valve in the bore..
Check Stock

SKYTOU Dual Gauge CO2 Regulator, Keg Beer Regulator CGA-320 Inlet for Draft Beer Homebrew Kegerator Dispensing Regulator

  • ❤【Double Gauge】: The top gauge (0-60psi) of this CO2 regulator shows you how much pressure is being provided to the kegs, the side gauge(0-3000psi) of this CO2 regulator shows you how much CO2 is left in your cylinder/tank..
  • ❤【Compatible & Safe】: This CO2 regulator works with any CO2 tank with a CGA-320 valve. It comes with a CGA-320 Female thread and a shut off valve allows you to turn the gas flow on / off and prevents liquid from backing into the regulator..
  • ❤【Premium Material】: The Draft Beer Dispensing CO2 Regulator adopts to food grade high-strength copper chrome decompression material and sturdy rubber boots that help protect them from damage. And Inside Safety Pressure Relief Valve springs also have high fatigue strength and durability..
  • ❤【Easy To Install】: Slap this CO2 regulator on a food grade CO2 tank, connect a gas line ( ID 5/16' or 3/8”) and carbonator, and you have a lot cheaper carbonated water than buying carbonated water bottles directly..
  • ❤【Suitable Occasions】: Particularly suitable in a Shop,Bar,Home,Out Door,Plants etc.....
Check Stock

SÜA - Oxygen and Acetylene Regulators Welding Gas Gauges -Pair - Rear Entry - LDP series

  • PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

Polishing Burnishing Wheel, 1in Inner Diameter Polishing Wheel, Stainless Steel Tube for Complex Types of Polishing Removing Rust(80 mesh)

  • 【MILKING REGULATING VALVE】Pressure stabilizing valve is an accessory used in pasture milking machine, which can adjust the vacuum range of small milking machine when working, and is a very important accessory in milking equipment..
  • 【PLASTIC VACUUM MILK MACHINE】Adjust the pressure by turning the screw, easy to operate and use.Suitable for donkeys, sheep, cattle, horses, can work well in the dairy factory, cow farm, goat or sheep farm..
  • 【PRESSURE REGULATOR ACCESSORY】Vacuum Pressure Regulator, Vacuum Pressure Regulator Valve Controller Milking Machine Part Replacement for Donkeys, Sheep, Cattle, Horses..
  • 【USED FOR】This is a milking machine pressure regulating valve, which is used for adjusting vacuum range of small milking machine.Pressure Regulating Valve..
  • 【EASY TO INSTALL】The machine interface is round and smooth, easy to install with less effort.Made of high quality plastic material, which is corrosion resistant and not easy to broke..
Check Stock

Injector Pressure Regulator Valve - IPR Valve - Compatible with Ford Trucks - Powerstroke 6.0L Diesel - E-350, Excursion, F-250, F-350 Super Duty - Replaces 5C3Z9C968CA, CM-5126, 5C3Z-9C968CA, AP63417

  • Replacement Injector Pressure Regulator Valve - regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus, being a critical component in your vehicle system..
  • Compatible Replacement for Ford 6.0L Vehicles - 2005 E350 Club Wagon | 2005 - 2010 E350 Super Duty | 2005 Excursion | 2005, 2006, 2007 F250 Super Duty | 2005, 2006, 2007 F350 Super Duty |. The injector pressure regulator valve can be located after removing the intake and the fuel filter housing above the engine which can be seen attached to the high pressure oil pump (HPOP)..
  • Replaces Part# 5C3Z9C968CA, 1846057C1, CM-5126, 5C3Z-9C968-CA, AP63417 - commonly found on popular F-250, F-350 Super Duty, E-350 and Excursion models with 6.0L V8 Diesel Powerstoke Engines including years 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then you may have a problem with your IPR valve..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, this inj....
Check Stock

Taprite WYE'd Dual Check Valves Beer Regulator - Draft Beer and Homebrew Keg Co2 Cylinder Tank Pressure Regulator and Gauge

  • COMMERCIAL GRADE REGULATOR - This CO2 regulator for homebrew or draft beer kegerator is a commercial grade beer regulator that is used by professional installers in bars and restaurants. This CO2 tank regulator lets get a professional quality beer at the comfort of your home!.
  • DURABLE AND MADE TO LAST - Taprite WYE'd Dual Check Valves Beer Regulator is made with high-quality materials to ensure your CO2 regulator is durable and made to last for years. This keg pressure regulator's high-grade components make it perfect for home or commercial use!.
  • SMOOTH PRESSURE CHANGE - Changing the pressure is very smooth and easy with Taprite WYE'd Dual Check Valves Beer Regulator. As you turn each valve, the pressure gradually increases or lowers, making it much easier to calibrate the output pressure to your desired level..
  • REBUILD KITS AVAILABLE - Our Beer CO2 Regulator with WYE have rebuild kit available so you won't have to get a whole new replacement if some parts eventually wore out. The beer regulator's worn or broken parts and equipment such as the nipples, valve, and gauge are easy to configure, replace and fix!.
  • BUILT IN SEAL TO PREVENT LEAKS - With this draft beer dispenser CO2 regulator, there is no need to use a washer because the rubber O-ring seal....
Check Stock

CO2 Secondary Regulator with 5/16 outlet barb Beer gas Regulator 0-60PSI for Home Brewing Beer Keg Kegging GWENBHMTOOL

  • Include: 1*CO2 Secondary Regulator with Single Barb and Chrome-plated brass body..
  • Function: The secondary CO2 key beer regulator can be used when barrels with different pressure requirements under the same CO2 tank..
  • Use: When using CO2 pressure regulator, you will still need a primary regulator with one output that connects to the secondary with a piece of airline..
  • Security: The single gauge secondary regulator features a manual pressure release valve and an internal pressure relief valve that releases pressure at 55-65 PSI to help ensure safety..
  • Service: If you have any question don't hesitate to contact us. We will reply you promptly and patiently within 24 hours. Your satisfaction is our goal..
Check Stock