Reviews Valve Oil Seal

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Brian Tooley Racing BTR LS Valve Seal Kit with Install tool 4.8 5.3 5.7 6.0 6.2 7.0

  • Brian Tooley Racing LS Valve Seal Kit, 8 Black Intake and 8 Black Exhaust Seals.
  • LS Valve Stem Seal Kit For Stock Powdered Metal and Bronze Guides.
  • Valve Stem Seals Keep Unwanted Oil From Entering the Combustion Chamber.
Check Stock

ValvoMax Quick Twist Oil Drain Valve – the Fastest, Easiest, Cleanest Way to Change Oil at Home – No Tools, No Mess, No Cleanup – for M12-1.75 - Stainless Drain Hose Attachment

  • CHANGE YOUR OIL AT HOME IN 10 MINUTES OR LESS WITH NO MESS. The fastest, easiest, and cleanest way to change your oil at home with the ValvoMax Quick Twist Oil Drain Valve. Replaces your drain bolt. Find your vehicle using the Amazon Confirmed Fit search tool. Free returns, no oil leaks guaranteed, lifetime warranty, 100% satisfaction, made in USA, veteran owned..
  • THE COMPLETE SOLUTION. Includes Quick Twist valve, steel cap with embedded rubber seal, drain tube assembly, and washer for installation. Eliminate the need for extra tools, no stripped or frozen drain plugs, avoid hot oil burns, and drain oil hot. Prevent spills, eliminate injuries, promote sustainability, controlled sampling, lower cost, reduce time, and more!.
  • PREMIUM BUILD. Features rugged Stainless-Steel construction that’s built to last, wave spring technology allows for FAST oil drain, premium VITON O-rings, safety cap with embedded rubber seal. Nothing comes close to the durability offered. Material you can TRUST! Designed with 3 redundancies in mind to eliminate any chance of leak..
  • NO LEAKS GUARANTEED. The Quick Twist valve has 3 backup mechanisms to p....
Check Stock

uxcell Solenoid Valve Water Inlet Seal Ring Gasket Normally Closed Seals Sealant Kits Accessories 1/2‘’ Thread

  • Advantage: If the seal ring is used for too long, it will naturally erode, then lose its function, or leak oil due to its poor function. Replace the new seal ring to make the solenoid valve work normally..
  • Applicable to the normally closed inlet valve and drain valve..
  • Total Size: 9.5x26mm/0.37‘’x1.02''(HxD).
  • Installation angle: Right Angle (90 degrees).
  • Package:1 x Solenoid Valve Water Inlet Seal Ring.
Check Stock

Shift Rite Transmissions replacement for 4L80E 1994-1996 Updated Transmission Valvebody MT1 Shift Rite 4L80E

  • This TCC regulator apply valve kit with a hard-anodized aluminum valve with PTFE seal prevents valve bore related problems..
  • Sonnax offers a replacement TCC regulator apply valve kit 34994-01K that will prevent valve-bore related problems..
  • Hard-anodized aluminum valve incorporates a PTFE seal at the main wear area of the bore to prevent oil loss..
  • The valve spool land at the spring end has been lengthened to provide greater bore-to-valve surface contact, thus further preventing leakage..
  • The valve spool has annular grooves to help center the valve in the bore..
Check Stock

CASTNOO for LS Valve Seal Installation Tool 2 piece set 4.8 5.3 5.7 6.0 6.2 Springs Suitable for LS Racing

  • ☞Function: A spring positioner is required. When the bronze rail is separated, the LS valve stem seal can prevent unnecessary oil from entering the combustion chamber..
  • ☞Installation: The operation is simple and convenient, and the valve seal can be easily installed when replacing the spring..
  • ☞Application: The valve seal installation tool can be used for stock powder metal and bronze rails..
  • ☞Protector: This tool allows you to slowly press the seal without damaging the seal..
  • ☞Service quality：100% service guarantee, if you encounter any problems, please contact us in time, we will deal with you as soon as possible..
Check Stock

URO Parts AJ872422PK Valve Cover Seal Washers 2pc set

  • Replaces hardened or cracking valve cover washer seals that allow vacuum leakage and degrade engine performance.
  • OE-style seal profile and durometer ensures proper compression seal between attaching hardware and valve cover.
  • High-quality seal material resists engine heat and oil degradation.
Check Stock

URO Parts NCA2575CA Valve Cover Bolt Seal, 28 per Engine

  • Replaces hardened or cracking valve cover washer seals that allow vacuum leakage and degrade engine performance.
  • OE-style seal profile and durometer ensures proper compression seal between attaching hardware and valve cover.
  • High-quality seal material resists engine heat and oil degradation.
Check Stock

3M 8210V Particulate Respirator with Cool Flow Valve, Grinding, Sanding, Sawing, Sweeping, Woodworking, Dust, 10/Box

  • NIOSH APPROVED: For at least 95% filtration efficiency against certain non oil based particles like dust.
  • COOL COMFORT: The proprietary 3M Cool Flow Valve is designed for easy exhalation to help keep the wearer more comfortable.
  • CUSTOM FIT: Adjustable nose clip helps provide a secure seal. Cushioning foam for added comfort on the nose.
  • EASY BREATHING: Incorporates proprietary technology with advanced electrostatically charged microfiber filter media, designed for easy breathing.
  • SECURE SEAL: Two strap design with dual point attachment helps provide a secure seal.
  • APPLICATIONS: Bagging, grinding, sanding, sawing, sweeping, woodworking, and other dusty applications.
  • For industrial/occupational use only. Not for consumer sale or use.
  • NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles.
  • Adjustable nose clip helps in obtaining a secure seal.
  • 3M Cool Flow Exhalation Valve helps reduce heat build-up inside the respirator.
  • Advanced electrostatic media is designed for ease of breathing.
  • Compatible with a variety of protective eyewear and hearing protection.
Check Stock

IPR Socket Tool Screen Kit - Compatible with Ford Powerstroke 6.0L Vehicles - F-250, F-350 Super Duty, Excursion, E-350 - Replaces 3C3Z9H529A, 904-415, 3C3Z-9H529-A, Injection Pressure Regulator

  • Replacement IPR Valve Seal Kit With Socket Tool - The injection pressure regulator valve regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. When the oil system gets contaminated by dirt or debris, the mesh filter of the IPR valve gets torned letting the debris get in and make the plunger mechanism inside to get stucked causing the vehicle to not build up pressure..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E350 Club Wagon | 2004 - 2010 E350 Super Duty | 2004 - 2010 E450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F250 Super Duty | 2003 - 2007 F350 Super Duty | 2003 - 2007 F450 Super Duty | 2003 - 2007 F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The oil system usually gets contaminated when the oil cooler is serviced or replaced and has not been cleaned properly..
  • Replaces Part# 3C3Z9H529A, 904-415, 3C3Z-9H529-A, 904415 commonly found on popular models with the Diesel Powerstroke 6.0 engine including year models 04, 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically ....
Check Stock

2 Set VCT Camshaft Timing Control Solenoid Valve Set Fit For Ford 3V 5.4L 4.6L F150 LINCOLN MERCURY 6 PCS 2 Solenoids + 2 Seals + 2 Screws

  • ● The Camshaft Variable Valve Timing Solenoid or VVT Solenoid control the engine's Camshaft shafts on your Ford 5.4L or 4.6L V8 Triton engine. When....
  • ● Replace the following OEM Part number: 3L3Z-6M280-EA.
  • ● Including 6 pieces: 2 Variable Valve Timing Solenoids (Both Left & Right).
  • ● Fit for :2005-2010 Mustang GT w/ 4.6L V8.
  • ● Seals Measure 1-3/4 Inch and Fit Early VCT Systems. Late VCT Systems seal's hole is in the center, Early VCT Systems seal is not in the center,....
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock