Reviews Valve Key With Hex Tip

Tub Drain Remover Wrench - Use to Install and Remove Most Bath and Shower Drains and Closet Spuds Square Plastic Toilet Seat Nuts

  • [WHAT YOU GET] – You will get 2Pcs hexagon key adapters for air conditioning ratchet wrench, provides access to 3/16-Inch and 5/16-Inch hard to reach valves..
  • [FEATURES] – Spring loaded ball bearing on hex adapter locks securely into HVAC service wrench..
  • [WIDE APPLICATION] – The A.I.FORCE Hex Key Adapters are designed to open and close the compressor service valve, rotalock valves and shutoff valves on air condition, refrigeration and other equipment, although there is very limited space..
  • [COMPATIBILITY] – The HVAC Service Hex Key Adapters fit for 1/4-Inch square wrench opening on Ratcheting Wrench, and compatible with 3/16" and 5/16" hex valves..
  • [PREMIUM QUALITY] - The A.I.FORCE Service Hex Key Adapters are constructed to last with high grade steel alloy, heat-treated for maximum strength..
Check Stock

AMI PARTS BPV31 Bullet Piercing Valve （1Pc） Compatible with 1/4,5/16,3/8 inch Universal Refrigerator Tubing

  • 【PARTS NUMBER】The BPV31 Line Tap Piercing Valve.This package contains 1 * piercing valve, 2 * adapters, 1 * hex key.
  • 【DIRECTLY REPLACES】AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31,etc.
  • 【FITS WITH】 BPV31 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes,If you have any uncertainty, If you have any questions after receiving the....
  • 【EASY TO INSTALL】Before installing valve, make sure that the special compound seal“O” ring is in position ① Position both halves of valve on....
  • 【To test or charge】Remove cap and connect charging hose to open valve turn valve stem counter-clockwlse with hex wrench.Make sure valve is closed....
Check Stock

FANOVO R134A A/C Refrigerant Freon Charge Hose with Gauge Set BPV31 Bullet Piercing Tap Valve Kits R134a Can to R12/R22 Port AC 1/2 Replace Universal Retrofit Valve Kit for AC/HVAC System (Gauge A)

  • ...ATERIAL: Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use.both of the kit are made of corrosion-resistant metal that won't wear out or rust over time, and anti-leaking design that will be safer for you.
  • BULLET PIERCING VALVE KITS：BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31，A practical kit and convenient for you to use，Each kit including 1 piercing valve, 1 hex key, 2 adapters.
  • AC U CHARGE HOSE: R134A charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is up to 350PSI. Total length is 19", ideal for easy to reach AC suction service port, for example the AC connector is right on top of your engine compartment.
  • EASY TO INSTALL: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refriger....
Check Stock

XIMOON BPV-31 Bullet Piercing Valve Line Tap Valve Kits 3 in 1 Adjustable Valve 1/4 5/16,3/8 Inch Outside Diameter Pipes Replacements for AP4502525 BPV31D GPV14 GPV31 GPV38 GPV56 MPV31-2 PACK

  • Bpv 31 kit each including : 1 piercing valve, 1 hex key, 2 adapters. piercing valve It is a high quality replacement part, It’s made from....
  • BPV-31 bullet piercing tap valve compatible with: TJ90BPV31, AP4502525, BPV31, BPV31D, GPV14, GPV31, GPV38, GPV56, and MPV31..
  • The bpv 31d bullet piercing tap valve kits fit with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes. No adapter valve is required..
  • Bpv31 bullet piercing valve easy to install: you only need a hex key wrench (included) to install this part.
  • Its compact design only requires a 2 inch....
  • Note: Refrigerator bullet piercing to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines.
Check Stock

2Pcs Hex Key Adapter for HVAC Service Ratcheting Wrench, 1/4-Inch Square to 3/16 and 5/16-Inch Hex, For HVAC Compressor Service Valve, Rotalock Valves Open or Close

  • [WHAT YOU GET] – You will get 2Pcs hexagon key adapters for air conditioning ratchet wrench, provides access to 3/16-Inch and 5/16-Inch hard to reach valves..
  • [FEATURES] – Spring loaded ball bearing on hex adapter locks securely into HVAC service wrench..
  • [WIDE APPLICATION] – The A.I.FORCE Hex Key Adapters are designed to open and close the compressor service valve, rotalock valves and shutoff valves on air condition, refrigeration and other equipment, although there is very limited space..
  • [COMPATIBILITY] – The HVAC Service Hex Key Adapters fit for 1/4-Inch square wrench opening on Ratcheting Wrench, and compatible with 3/16" and 5/16" hex valves..
  • [PREMIUM QUALITY] - The A.I.FORCE Service Hex Key Adapters are constructed to last with high grade steel alloy, heat-treated for maximum strength..
Check Stock

Wadoy R12 to R134a Conversion Kit with BPV31 Piercing Valve R12 to R134a Retrofit Kit for A/C Pro Refrigerant R12 to R134a Adapter

  • Package include: 1 low side port and 1 high side port, 1 valve ,1 Hex Key, 2 Adapters.
  • R12 to R134a Adapter: Perfect air conditioning conversion adapter kit. Completely used to replace R12 with R134a. Fits all vehicles 1976 – 1995,....
  • BPV31 Piercing Valve: 3-In-1 Line Tap Piercing Valve for Bullet, 500 psi Pressure, corrosion resistant. Fits HVAC system 3 sizes of tubing ( 1/4",....
  • Easy to operate and install, you can install bullet piercing tap valve by the hex key in the package, the installation process will not take up too....
  • Non-original but part of the aftermarket. High-quality materials, automotive products that are favored by users.
Check Stock

Trounistro 6 Pack BPV-31 Bullet Piercing Valve Line Tap Valve Kits Adjustable Valve for Air Conditioners HVAC 1/4 5/16 3/8 Tubing

  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits.
  • Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough....
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing,....
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time.
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation.
  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines.
Check Stock

Trounistro 4 Pack BPV-31 Bullet Piercing Valve Line Tap Valve Kits Adjustable Valve for Air Conditioners HVAC 1/4 5/16 3/8 Tubing

  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing,....
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time.
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation.
  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines.
  • What you will get: you will get 4 packs BPV-31 bullet piercing tap valve kits.
  • Each kit including 1 piercing valve, 2 adapters, 1 hex key.
Check Stock

Bullet Piercing Valve Kits BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch 5/16 Inch 3/8 Inch Outside Diameter Pipes Replace for AP4502525 BPV31D GPV14 GPV31 GPV38 GPV56 MPV31 6 Sets

  • You will receive: 6 packs BPV-31 bullet piercing tap valve kits.
  • Each kit including 3 piercing valve, 3 hex key, 6 adapters.
  • Model No.: BPV-31 bullet piercing tap valve.
  • Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • Sturdy material: made of corrosion-resistant metal that won' t wear out or rust over time, a convenient replacement part for you to use.
  • Easy to install: you only need a hex key wrench (included) to install this part.
  • Its compact design only requires a 2 inch clearance area for....
  • Compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Check Stock

Piercing Valve Kits BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31 (2 Sets)

  • You will receive: 2 packs BPV-31 bullet piercing tap valve kits.
  • Each kit including 1 piercing valve, 1 hex key, 2 adapters.
  • Model No.: BPV-31 bullet piercing tap valve.
  • Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • Sturdy material: made of corrosion-resistant metal that won' t wear out or rust over time, a convenient replacement part for you to use.
  • Easy to install: you only need a hex key wrench (included) to install this part.
  • Its compact design only requires a 2 inch clearance area for installation and use.
  • Compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Check Stock

Piercing Valve Kits with Dust Cap Converts R12 to R134a Fit 7/16 Inch Low Side Port BPV-31 Piercing Tap Valve Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31

  • Package includes: you will receive 1 pack BPV-31 kit (including 1 piercing valve, 1 hex key, 2 adapters) and 1 pack universal retrofit valve with a dust cap, a practical kit and convenient for you to use.
  • BPV-31: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
  • Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
  • Suit for vehicles pre-1994, comes with R-134a refill fittings.
  • Easy to use: BPV-31: just screw it on then it's okay.
  • BPV-31 piercing tap valve: you only need hex key wrench (included) to install this part.
  • Its compact design only requires a 2-inch clearance area for installation and use.
  • Durable material: both of the kit are made of corrosion-resistant metal that won't wear out or rust over time, and anti-leaking design that will be safer for you.
Check Stock

Mudder Bpv31 Piercing Valve 134a Kit R134a Refrigerant Charge Hose with Gauge, Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/r22 Port Ac 1/2 and Universal Retrofit Valve with Dust Cap

  • Package content: 3 packs BPV-31 piercing tap valve kits (each kit contains 1 piercing valve, 1 hex key and 2 adapters), including R134a U-charge hose with gauge and can tap, universal retrofit valve with a dust cap, 5 packs in total, bring you more convenient for replacement.
  • All our replacement kits are made of corrosion-resistant metal that won’t wear out or rust over time, with anti-leaking design that will be safer for you.
  • Easy to install: our BPV-31 piercing tap valve kits come in compact design that only requires a 2-inch clearance area for installation and use, and you only need 1 hex key wrench (included) to install the kit.
  • If you want to attach the gauge with BPV piercing tap valve, you need a retrofit valve (included).
  • R134a Charging hose: 19 inch hose with R-134a can to R-12/R-22 service port connection, 1/2 inch end fits R12, 22, 502 fittings.
  • And the gauge has scale readings for R134, R12, and 22. 90-degree push and lock coupler with auto shut off.
  • Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
  • Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch ....
Check Stock

Bondhus 27098 Set of 22 Stubby Double Ball End L-Wrenches XL Double Pk

  • Double pack of two popular L-wrench sets.
  • Includes #67037 Stubby Double Ball End Tip Hex Key L-wrench Set of 13 with ProGuard Finish. Packaged in Bondhex Color Coded Case. Set includes sizes: .050 in., 1/16 in., 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 3/16 in., 7/32 in., 1/4 in., 5/16 in. & 3/8 in..
  • Includes #67099 Stubby Double Ball End Tip Hex Key L-wrench set of 9 with ProGuard Finish. Packaged in Bondhex Color Coded Case. Set includes sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm & 10mm.
Check Stock