Reviews Valve Cover Spacer

Home Right C800798 Roller Tune-Up Kit, Multicolor, 7 inches

  • HOMERIGHT PAINT ROLLER COVER: The Tune-up kit is everything you need to make your Home Right Paint Stick and Paint Stick EZ-Twist like new. Includes parts to rebuild piston and valve body with roller cover end caps and foam spacer..
  • EASY PAINT ROLLER: The new and improved Paint Stick EZ-Twist is the perfect upgrade to the original Paint Stick. Painting a room can be daunting, but the EZ-Twist easily allows you to paint and reduces the stress of painting your home.
  • PAINT ROLLER KIT COMES WITH: Includes inner end cap, foam spacer, outer end cap, outer snap cap, end cap sealant strip, Paint Stick EZ-Twist outer end cap, Paint Stick piston O-rings, Paint Stick EZ-twist piston quad-rings, duck valve, foam wiper, retainer ring and petroleum jelly.
  • : The Paint roller tune up kit with 2 years limited.
  • BEST PAINT ROLLER: With extended reach and more control, the EZ-Twist allows you to easily paint those hard-to-reach areas in your home such as stairways, hallways, and more.
Check Stock

ICT Billet LS Valve Cover Spacer Billet LS1 LS2 LS3 LS7 LSX 3/4\ .75 Inch Riser for Tall Mount Roller Rocker Clearance Spacer Compatible with Chevy LS 1997-up 551641-7

  • Compatible with 1999 up LS series engines.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Includes: 8 bolts, 2 valve cover spacers.
  • LS valve cover spacer billet LS1, LS2, LS3, LS7, LSX, 3/4" .75 Inch Riser.
Check Stock

ANDO RACING Blow Off Valve Spacer, Blow Off Valve Adaptor BOV Compatible with VW AUDI 2.0T TSI TFSI MK5 GTI B7 A3 A4 TT Diverter DV

  • 【Fitment】Compatible with 2006-2013 Volkswagen and Audi 2.0t FSI and TSI engines. Engines available for: Jetta, GTI, GLI, Passat, Tiguan, A3, A4, Q5.
  • 【Function】This blow off valve spacer will give your vehicle the traditional BOV sound will retaining the stock DV.
  • 【Features】Matched with the original electronically controlled solenoid valve and adopts O rings to achieve a perfect seal.
  • 【Material】The blow off valve spacer is made of high quality aluminum. light in weight and durable.
  • 【Service】We offer one year warranty for the spacer. If you have any questions, please contact our team.
Check Stock

ICT Billet SBC Small Block Chevy 1\ Billet Valve Cover Spacer Aluminum 350 Compatible with Chevrolet Shaft Mount Roller Rocker Engines Clearance 551661-1

  • Used to raise valve covers for valvetrain clearance.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • Includes: 2 spacers, and mounting hardware.
  • These will require a gasket and/or sealer on both sides of the spacer.
  • Compatible with Small Block Chevy Valve Cover Spacers.
Check Stock

ICT Billet SBC Small Block Chevy 3/8\ Billet Valve Cover Spacer Riser 350 Compatible with Chevrolet Shaft Mount Roller Rocker Engines Clearance 551661-3

  • Used to raise valve covers for valvetrain clearance.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • Includes: 2 spacers, and mounting hardware.
  • These will require a gasket and/or sealer on both sides of the spacer.
  • Compatible with Small Block Chevy Valve Cover Spacers.
Check Stock

ICT Billet SBC Small Block Chevy 3/4\ Billet Valve Cover Spacer Riser 350 Compatible with Chevrolet Shaft Mount Roller Rocker Engines Clearance 551661-7

  • Used to raise valve covers .75 inch for valvetrain clearance.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Includes: 2 spacers, and mounting hardware.
  • These will require a gasket and/or sealer on both sides of the spacer.
  • Compatible with Small Block Chevy Valve Cover Spacers.
Check Stock

ICT Billet 5.3L LS Square Coil Brackets Valve Cover D581 D514A D510C 12558693 LSX Swap Truck LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Designed & Manufactured in the USA 551654

  • These brackets move your coils down toward the center of the valve cover from factory coil location..
  • These brackets are designed to fit D581 coils, and move them 1-1/8" down toward center of the valve cover from factory coil location..
  • These will also work with D510C or D514A coils if you get the spacer kit (551303), and will move them 1-3/8" down toward center of the valve cover from factory coil location..
  • Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum.
  • Included in the package are 2 coil brackets, and required mounting hardware..
Check Stock

Steelman Heavy-Duty Tire Valve Stem Puller/Installer Automotive Tool, Notched Polyvinyl Spacer to Protect Wheels and Provide Anchor Points, Pivoting Head, Durable Steel, Comfortable Grip

  • Durable steel - durable steel construction with polyvinyl spacer to protect wheels and rims from possible damage.
  • Notched spacer - vinyl spacer has 5 notches on each side to help provide a secure anchor point on rims during use.
  • Pivoting head - pivoting head freely rotates and is designed to work with most aftermarket wheels and rims.
  • Threaded head - swivel head screws onto valve thread for easy installation and removal of stems without having to remove the valve core.
  • Comfort grip - dual layer handle is ergonomically designed to provide a secure, non-slip grip.
Check Stock

HuthBrother Injector Tune Up SHIM Kit Fits 1994-2003 7.3L powerStroke Diesel Engines (NO TOOLS)

  • ★【Package includes】–TEN .004″ thick special stainless steel washers. (TWO TO BE INSTALLED UNDER THE ARMATURE PLATE TO INCREASE THE CLEARANCE to .004″.
  • ★【Package includes】–FORTY .002″ and FORTY .003″ stainless steel SOLENOID SPACER SHIMS. One of each placed under all four corners of the coil (for a total .005″) to increase the SOLENOID to armature clearance, when SOLENOID is energized..
  • ★【Package includes】–STEP BY STEP INSTRUCTIONS WITH PICTURES to install the two .004″ armature shims and INSTALL the .002″ and .003″ SOLENOID SPACER SHIMS (total .005″) and tips on thing to check with the valve cover off..
  • ★【 Fits Following 】–Kit Works on most HEUI injectors.
  • 1994 – 2003 7.3L PowerStroke, International T444E / DT466e / 1530E . Also works on Cat 3126B top solenoid , International Perkins 4.5L, 6.0L, & 1300edi HEUI injectors..
  • ★【After-Sales Service 】–Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours..
Check Stock

Xitomer Motorcycle Handlebar risers Handlebar Risers Spacer Kit Fit for Ninja ZX-14R / ZZR 1400 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021

  • ▷Specification◁ 4 pieces 7/8" handlebar to 1" handlebar mounting standpipe clamp conversion shim spacer for motorcycle.
  • ▷High Quality◁ This universal handlebar shims risers are made in aluminum alloy to make spacer more durable and study..
  • ▷Practical Function◁ This variable diameter spacer is mainly used to convert motorcycle handlebars from 22 mm/7/8 in diameter to 25 mm/1 in..
  • ▷Application◁ Fit for 22 mm diameter handlebar on Motorcycle.
  • ▷How To Work◁Just place a handlebar shim on each side of the gripping area of the handle, insert the valve stem, and tighten it in the normal way..
Check Stock

12oz 16oz Can Crusher Pneumatic Air Powered, Soda Beer Aluminum Can Crusher for Recycle - Countertop & Heavy Duty

  • All steel material for the frame and piston, easy to crush 16oz/12oz aluminum cans..
  • Self assembly and Assembly skills is required, Detailed instruction manual is provided.
  • Air Cylinder Can Crusher, Just press the button of the valve to smash almost all kinds of aluminum cans..
  • Safe and relialbe: Safety mechanical valve used to avoid misoperation. a special rubber spacer is included to press the valve.
  • Air compressor is needed to drive the Can crusher..
Check Stock

DEEIRAO Motorcycle Air Cushion Seat Cushion 3D Airbag Seat Pad with Seat Cover Bandage Air Pump for Cruiser Touring Saddles Bearing 330lb – Large Size 15″x14″x1.6″

  • 3D AIRBAG COMFORTABLE – Patented air cell technology, bearing 330lb, built-in stress relieving features reduce pressure point on tailbone, buttocks for a more comfortable ride..
  • HIGH QUALITY MATERIAL – Air pad is made of durable TPU polyurethane and cover is made of breathable spacer mesh cloth with 3-layers of knit polyester for air circulation, and non-skid bottom..
  • VALVE ROTATING DEFLATE DESIGN – According to the different weight of each person, the appropriate air saturation can be adjusted. It is very easy. Rotate the air valve to adjust the air capacity of the cushion. Even if you sit on it, you can operate it with one hand..
  • ENJOY DRIVING TRIP: The requirements for the motorcycle cushion pads are higher especially for long-distance cycling and professional riders. To ensure a more flexible and comfortable to drive, a new material airbag cushion becomes necessary..
  • 2 YEARS WARRANTY: When you purchase our DEEIRAO products, you will become our VIP customer, and will enjoy 30 days free return or replacement, 2 years long warranty service..
Check Stock

Aluminum Can Crusher Heavy Duty Pneumatic Cylinder Soda Beer Can Crusher Eco-Friendly Recycling Tool Countertop Button Valve

  • Air Cylinder Can Crusher, Just press the button of the valve to smash almost all kinds of aluminum cans..
  • Safe and relialbe: Safety mechanical valve used to avoid misoperation. a special rubber spacer is included to press the valve.
  • Sturdy and Durable: all steel material for the frame and piston, easy to crush any aluminum cans.
  • Bore ID of cylinder: 63mm, Stroke of Cylinder: 200mm, Maximum Can to be cushed: OD 2.8 inch,Height 7 inch.
  • Air compressor is needed to drive the Can crusher..
Check Stock