Reviews V Track Barn Door Hardware

SKYSEN 6FT Sliding barn Door Hardware kit, Barn Door Track, 1/4” Thick Material- Combination Track- Smooth and Quiet- Easy to Install- Black (J Shape-5)

  • [SUPER QUALITY RAW MATERIAL] Barn door hardware kit are made of 1/4” thick carbon steel (Maximum load 265lbs). Barn door wheel are made of POM (Stronger than plastic or nylon). Barn door spacer is also made of carbon steel (More stable than other plastic spacer). The bolts and leg screws are 8.8 grade (Keep the barn door hardware system last for long). The surface is spray black powder coat (Anti-rust, Looks smooth)..
  • [EASY TO INSTALL] Barn door track pre-drilled hole space is 16", Step by Step Instruction included. Our Instruction is listing every step for installation from A to Z. You can finish the installation of barn door hardware kit in half an hour if you get 2 workers. In case you get any problem or missing parts during installation, please free feel to contact us via amazon..
  • [IF MY BARN DOOR FIT THIS SIZE] 6FT Barn door hardware kit fit for door panel width up to 36”, Fit for door thickness from 1-3/8" to 1-3/4"(If you your barn door panel is too thin, then you can using the 5mm black spacer pad inside package, if your barn door is too thick, then you need to buy longer bolt extra). If you have a door way trim, then you need to buy an extra trim board to install the barn door track or just remove your trim..
Check Stock

SKYSEN 6FT Barn Door Hardware Kit, Sliding Barn Door Hardware Kit, Barn Door Track, Combination Track- Smooth and Quiet- Easy to Install- Manual Included- Lite Version- Black (J-Lite-5)

  • ✅[INNOVATION DESIGN-LIGHT VERSION] By using the light version carbon steel for barn door hardware system(lighter but hold maximum 265lbs, More stronger and stable), The barn door track will be easy to lift up during installation. Low clearance barn door hardware, Less space required, The barn door roller is shorter, Which make the space required from top of barn door to ceiling will be only 5"..
  • ✅[PREMIUM RAW MATERIAL] Barn door hardware kit are made of premium quality carbon steel in thickness of 5/32", Which make the barn door kit system more sturdy and stable durability. The wheel part are made of POM(better than steel, few scratch to barn door track), 2 pcs Bearings in side wheel, All these ensure the sliding will be smoothly and quietly..
  • ✅[REASONS FOR CHOOSING US] Get super quality barn door hardware kit from us ,All the barn door hardware kit have been inspected in factory before delivery，Passed 100,000 times opening and closing test.Get barn door hardware kit with a manufacturer price,why not ? In case you got any confustions on installation or missing parts after got the package ,kindly feel free to contact us via amazon directly ,we will ....
Check Stock

DaAzHai 6 Ft Sliding Barn Door Hardware:Easy to Install -Smoothly and Quietly Barn Door Hardware One-Piece Rail Low Ceiling Barn Door Track

  • At DaAzHai , all of our barn door hardware is made from quality materials and is handcrafted by skilled artisans.Low clearance barn door hardware, Less space required because of barn door hardware kit are made of premium quality carbon steel. Attention: the steel bar is in pieces that have to be assembled..
  • DaAzHai sliding barn door hardware use the light version carbon steel for barn door track system. Our barn door hardware kit is lighter but hold more stronger and stable. Fit door weight capacity: 245lbs.
  • Fit door panel thickness: 1-5/8" to 1-3/4''. If the door is thicker , please add a piece of spacer we provided to increase the distance between track and wall. Perfect for indoor decoration in kitchen, bedroom, dressing room, club, pub and so on..
  • DaAzHai barn door hardware comes complete and ready for you to install yourself. We provide simple instructions so you can quickly install your barn door hardware stress-free. Our instruction explains every step with words and picture and all data is measured in inch. It is very easy for you to take a reference during the installation..
  • DaAzHai barn door hardware kit includes (2)Steel Hanger, (5) Flat Track, (9) Adjustable Spacer, (1) Floor guide, (9) Fastener Screw, (2) Doo....
Check Stock

DaAzHai 5 Ft Sliding Door Hardware:Easy to Install -Smoothly and Quietly Sliding Barn Door Hardware Kit Single Door Track Low Ceiling Barn Door Hardware Kit, Modular Track with Stable Connection

  • At DaAzHai, all of our low clearance barn door hardware is made from quality materials and is handcrafted by skilled artisans. Low clearance barn door hardware, less space required because of low profile barn door hardware are made of premium quality carbon steel. Attention: the steel bar is in pieces that have to be assembled..
  • DaAzHai sliding barn door hardware use the light version carbon steel for barn door track system. Our barn door hardware kit is lighter but hold more stronger and stable. Fit door weight capacity: 265 lb.
  • Fit door panel thickness: 1-5/8" to 1-3/4". If the door is thicker , please add a piece of spacer we provided to increase the distance between track and wall. Perfect for indoor decoration in kitchen, bedroom, dressing room, club, pub and so on..
  • DaAzHai sliding closet door hardware comes completely and get ready for you to install by yourself. We provide simple instructions so you can quickly install your sliding barn door with hardware kit included stress-free. Our instruction explains every step with words and picture and all data is measured in inch. It is very easy for you to take a r....
Check Stock

ZEKOO Rustic 5 FT Bypass Barn Door Hardware Sliding Steel Track for Double Wooden Doors Kit

  • 【Double Track Bypass】Barn door double track bypass hardware kit is low ceiling design, only need 9 inch ceiling space from top of the door to ceiling.
  • double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is one complete 5FT Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade....
Check Stock

JZVXX 6FT Sliding barn Door Hardware kit, Barn Door Track, Fit for Door Panel Width up to 36", Easy to Install- Combination Track Mode- Step by Step Manual Included.(JD-6FT-5)

  • 【Basic Info】 Barn door hardware kit maximum hold barn door for 265lbs, Fit for door panel thickness from 1-3/8" to 1-3/4", Fit for door panel width up to 36"..
  • 【Smooth and Quiet】 Based on the POM made wheels(2 bearings inside wheel), which allows the barn door system to slide more silky smoothly and quietly and does not easily cause wear and tear on the track..
  • 【Strong and Durable】 Barn door track are made of 1/4" thick carbon steel with black powder coating, This greatly increases the robustness of the barn door track and makes it water, dust and rust resistant, all attributes that allow the entire barn door hardware kit to maintain long-term stable operation..
  • 【Less Space Ocuupy】 Compared with normal sliding doors, Sliding barn door hardware kit are more space-saving, the space behind your door is not bound, you can easily stack items behind the door, it is your space becomes more neat, this is the biggest reason why we choose barn door system..
  • 【What Included】 5* barn door track(combine to 6ft), 2* barn door rollers, 2* door stoppers, 2* a....
Check Stock

SKYSEN 4FT Single Sliding barn Door Hardware kit Barn Door Track 1/4” Thick Material- 4FT-13FT Available- Smooth and Quiet- Easy to Install- Black I Shape

  • [SUPER QUALITY RAW MATERIAL] Barn door hardware kit are made of 1/4” thick carbon steel (Maximum load 265lbs). Barn door wheel are made of POM....
  • [EASY TO INSTALL] Barn door track pre-drilled hole space is 16", Step by Step Instruction included. Our Instruction is listing every step for....
  • [IF MY BARN DOOR FIT THIS SIZE] 4FT Barn door hardware kit fit for door panel width up to 24”, Fit for door thickness from 1-3/8" to 1-3/4"(If you....
  • [WHY US] Get super quality barn door hardware kit from us, All the barn door track and barn door roller have been inspected in factory before....
  • [WHAT YOU WILL GET] (1) 4FT Barn door track, (3) Wall spacer with leg screws, (2) Door stopper, (2) Barn door roller with bolts and nuts, (2) End Cap,....
Check Stock

ZEKOO Black Steel 10 FT Sale Bypass Sliding Barn Door Hardware Track for Double Wooden Doors Closet Kitchen Kit Low Ceiling

  • 【Double Track Bypass】Barn door double track bypass hardware kit is low ceiling design, only need 9 inch ceiling space from top of the door to ceiling.
  • double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and....
Check Stock

ZEKOO Rustic 10-16 FT Bypass 4 Doors Barn Door Hardware Sliding Black Steel Big Wheel Roller Track (12 FT Bypass 4 Doors Hardware Kit)

  • 【Big Wheel Double Track Bypass Sliding Barn Door Hardware】Barn door double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, the system doesn't need a wall twice the width of the door opening, very save space, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Double Track Bypass】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is one complete 4FT Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade S....
Check Stock

ZEKOO Rustic 10-16 FT Bypass 4 Doors Barn Door Hardware Sliding Black Steel Big Wheel Roller Track (16 FT Bypass 4 Doors Hardware Kit)

  • 【Big Wheel Double Track Bypass Sliding Barn Door Hardware】Barn door double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, the system doesn't need a wall twice the width of the door opening, very save space, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Double Track Bypass】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is one complete 4FT Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade S....
Check Stock

ZEKOO 4FT - 16FT Double Track Bypass Barn Door Hardware Kit Low Ceiling Wall Mount for Closet Double Wooden Doors (5FT Bypass kit)

  • 【Double Track Bypass】Barn door double track bypass hardware kit is low ceiling design, only need 9 inch ceiling space from top of the door to ceiling.
  • double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is one complete 5FT Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade....
Check Stock

ZEKOO 4FT - 16FT Double Track Bypass Barn Door Hardware Kit Low Ceiling Wall Mount for Closet Double Wooden Doors (10FT Bypass kit)

  • 【Double Track Bypass】Barn door double track bypass hardware kit is low ceiling design, only need 9 inch ceiling space from top of the door to ceiling.
  • double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spray....
Check Stock

ZEKOO 12 FT 4 Doors Bypass Barn Door Hardware Four Rollers Style Kit

  • 【Double Track Bypass】Barn doors double track bypass hardware kit is low ceiling design, only need 9 inch ceiling space from top of the door to ceiling.
  • double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping a....
Check Stock