Reviews V Channel

ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Class-D+Amp Kit

  • Package Includes: (1) Alpine X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Class-D Amp. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring....
  • Low level: .2 - 4V. Frequency Response: 4-channel: 10 - 60,000Hz Sub channel: 8 - 400Hz. 4-channel: 10 - 60,000Hz. Sub channel: 8 - 400Hz. Total....
  • 4-channel: 10 - 60,000Hz. Sub channel: 8 - 400Hz. Features: RockvilIe RTR252 2 Channel - Dual 25 Foot High Grade Twisted Pair RCA Cable. Oxygen Free....
  • RockvilIe RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit. (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge....
Check Stock

Muzata 6Pack 3.3FT/1M V-Shaped Aluminum LED Channel System with Milky White Frosted Cover Lens Silver Aluminum Profile Track for Light Strip V1SW 1M WW,LV1 LW1

  • The track is a sturdy V-shaped anodized extruded aluminum channel that's better heat dissipation, milky white PC diffuser works well to help spread the light more evenly from the strip lights, protect LED from dust. Please note that this channel is not spotless, need the spotless v-shaped led channel, please search MUZATA V101.
  • The LED channel is 10mm(0.4") wide, fits most light strips with width less than 10mm, such as 3528, 5050, 5630, etc. Search "MUZATA U102" to get the SPECIAL DESIGNED aluminum LED channel track housing for Philips hue plus 2nd generation.
  • High quality- This sturdy V-shaped anodized extruded v-shaped aluminum channel has great heat-dissipation ability. Milky white PC plastics cover works well to help spread the light more evenly from the strip lights, protecting LED from dust.
  • The solid led channel tracks are not flexible, search for MUZATA U106 to get the BENDABLE LED Channel. Muzata provide L-shape corner adapter(search for MUZATA LC08) connect the aluminum housing channels at 90 degree angle turning.
  • PACKAGE INCLUDE- 6PCS 1-meter V shape LED Aluminum Channel and 6PCS 1-meter matching milky white lens. 12PCS end caps, 12PCS mounting clips, 12PCS screws. You could also search Muzata U108 to get the spotless U-shaped LED channels. T....
Check Stock

Analog Discovery Systems Kit: USB Oscilloscope & Logic Analyzer

  • Two-channel USB digital oscilloscope, spectrum analyzer, and network analyzer (±25V, differential, 14-bit, 100MS/s, 30MHz+ bandwidth).
  • Two-channel arbitrary function generator (±5V, 14-bit, 100MS/s, 12MHz+ bandwidth).
  • 16-channel digital logic analyzer, pattern generator, and protocol analyzer (3.3V CMOS and 1.8V or 5V tolerant, 100MS/s).
  • Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS).
  • Additional instruments including a data logger, impedance analyzer, and power supplies.
Check Stock

ALPINE S-A32F 320w RMS 4-Channel S-Series Car Audio Amplifier Class D+Amp Kit

  • (1) Alpine S-A32F 320 Watt RMS 4-Channel S-Series Car Audio Amplifier Class D Amp. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. Install. Terminal Layout: One side. Small footprint for easy installation. Screw terminals (for speaker and power cables). General. Amplifier Type: Class-D (Digital). Channel Design: 4/3/2 Channel. Thermal Management Control. Top Mounted LED Power/Status Indicator. Speaker Level Input with remote turn on.
  • Crossover: Adjustable Low-pass (LPF) / High-pass Filter (HPF). Gain Control: Adjustable. Bass Control: Remote Bass Control (RUX-KNOB2) Ready. Max Power Output Ratings. Total Max Power: 640W. RMS Power Ratings. Per Channel into 2 Ohms, 14.4V (%THD+N): 4 x 80W. Per Channel into 4 Ohms, 14.4V (%THD+N): 4 x 55W. Bridged into 4 Ohms, 14.4V (%THD+N): 2 x 160W. Sound Tuning. Crossover: Variable LPF, 50-400Hz (-12dB/oct ). Crossover: Variable HPF, 50-400Hz (-12dB/oct ). General.
  • Power Requirements: 14.4 V.DC (9 - 16 V allowable). Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V. High Level Input with automatic power on. Cable size: Power Cable AWG 8, SPK Cable AWG 10. Frequency Response (+0, -....
Check Stock

Orion HCCA1000.4 4 Channel Amplifier 1000 Watts Car Audio Car Stereo Amp

  • RMS Watts @ 4 Ohm Stereo 14.4V:   150 Watts X 4 Channel / RMS Watts @ 2 Ohm Stereo 14.4V: 250 Watts X 4 Channel / RMS Watts @ 4 Ohm Bridge 14.4V: 500 Watts X 2 Channel.
  • Hi Pass Freq.   50Hz-2KHz / Low Pass Freq. 50Hz-2KHz.
Check Stock

HiLetgo USB Logic Analyzer Device With EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

NOYITO USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input High Voltage: 2.0V to 5.25V003cbr003e.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

MUSYSIC MU-D16K Professional 2-Channel 2x8000 Watts D-Class 1.5U Power Amplifier

  • 2-Channel Professional D-Class Power Amplifier 2x8000 Watts Peak Output.
  • Stereo Output Power: "2x8000W PEAK, 2x4000W Program, 2x2000W RMS @ 2Ω" "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @ 4Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @ 8Ω" / Bridge Output Power: "8000W PEAK, 4000W Program, 2000W RMS @ 4Ω" "4000W PEAK, 2000W Program, 1000W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 90v-250v 50Hz.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protecti....
Check Stock

74LS153 Dual 4-Input Multiplexer (2 Pack)

  • Wide Range of Digital and Analog Signal Levels Digital: 3 V to 20 V Analog: ≤ 20 VP-P, Break-Before-Make Switching Eliminates Channel Overlap.
  • Low ON Resistance, 125 Ω (Typical) Over 15 VP-P Signal Input Range for VDD – VEE = 18 V.
  • High OFF Resistance, Channel Leakage of ±100 pA (Typical) at VDD – VEE = 18 V, Maximum Input Current of 1 µA at 18 V Over Full Package Temperature Range, 100 nA at 18 V and 25°C.
  • Logic-Level Conversion for Digital Addressing Signals of 3 V to 20 V (VDD – VSS = 3 V to 20 V) to Switch Analog Signals to 20 VP-P (VDD – VEE = 20 V) Matched Switch Characteristics, rON = 5 Ω (Typical) for VDD – VEE = 15 V Very Low Quiescent Power Dissipation Under All Digital-Control Input and Supply Conditions, 0.2 µW (Typical) at VDD – VSS = VDD – VEE = 10 V.
  • Binary Address Decoding on Chip, 5 V, 10 V, and 15 V Parametric Ratings, 100% Tested for Quiescent Current at 20 V.
Check Stock

JBL Professional EON ONE Portable All-in-One Linear-Array 6-Channel PA System Black

  • Your purchase includes One JBL Professional EON ONE 6-Channel base | Height spacers (x2), Column speaker array (x1), Power cable & quick-start guide.
  • Speaker dimensions – 24.7” D x 20.2” W x 30.2” H | Weight – 40.8 lbs. | Voltage – 100V-120V / 220V-240V, selectable 50/60Hz | Max SPL –....
  • 6-channel input/output – combo ¼” / XLR (x2), balanced ¼” TRS or RCA jacks (x2), 3.5mm jack (x1), or wireless Bluetooth connection.
  • Unobstructed 10” bass-reflex subwoofer for accurate low-frequency response.
  • Proven JBL Professional sound quality and powerful 6-channel mixer with easy-to-use controls.
Check Stock

USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 SCM

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

MUSYSIC MU-D9600 Professional 4-Channels 2x9600 Watts D-Class 1U Power Amplifier

  • 4-Channels Professional D-Class Power Amplifier 2x9600 Watts Peak Output.
  • Stereo Output Power: "4x4800W PEAK, 4x2400W Program, 4x1200W RMS @ 2Ω" "4x2400W PEAK, 4x1200W Program, 4x600W RMS @ 4Ω" "4x1200W PEAK, 4x600W Program, 4x300W RMS @ 8Ω" / Bridge Output Power: "2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 4Ω" "2x2400W PEAK, 2x1200W Program, 2x600W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 115v-230v 50/60 hz.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio fre....
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • (2) Alpine SPE-6090 6" x 9" 2 Way Pair Of Car Stereo Speakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover:....
Check Stock