Reviews Used Cnc Machining Center

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Center Drill Bits Kit 1.5/2/2.5/3/4mm Center Drill Bit 5pcs High Speed Steel Center Drill Bits 60 Degree Center Drill Bit for Hole Processing

  • [Prefabricated Precise Positioning]: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • [Light Cutting and Good Chip Removal]: It has the advantages of light cutting and good chip removal.
  • When machining a center hole with a diameter of 2-10mm, this center drill is usually used.
  • [5 Center Drill Bits]: This 60 degree center drill bit has 5 center drill bits, which can be used to drill holes of different sizes.
  • [Made of High-speed Steel]: This center drill bit is made of high-speed steel, with high hardness and good wear resistance.
  • [Widely Used]: This center countersink drill bit can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
Check Stock

ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)

  • {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
  • {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
  • {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
  • {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
  • {Package Included} 1x Left hand Thread Tap.
Check Stock

Beall Collet Chuck, Easy To Replace Lathe Collet Chuck Wear-resistant and Durable for CNC Machining Center

  • Scope of application: This milling chuck holder is used for CNC machining center.
  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
  • As milling machine accessories, convenient to replace the broken one.
Check Stock

Beall Collet Chuck, Stable Performance Lathe Collet Chuck with ER32 Wrench Collet Chuck Holder for CNC Machining Center

  • As milling machine accessories, convenient to replace the broken one.
  • Scope of application: This milling chuck holder is used for CNC machining center.
  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
Check Stock

Acratech GXP Ball Head w/ Knob Clamp

  • 【Low Profile More Stable】The ball head is designed with a low center of gravity, CNC machining, 44MM large ball diameter, making it extremely....
  • 【Excellent Quality】The low profile ball head adopts all-metal structure, 0.1MM machining tolerance, anodic anodized, ultra-high-strength aviation....
  • 【Excellent Design】Double grooves and lightweight design. The maximum load-bearing capacity of this low profile ball head camera mount is 44....
  • 【Precision Adjustment】4 * 90 degrees, 5 degrees per scale, and double spirit bubbles to meet the needs of accurate photography and Panoramic....
  • 【Widely Applicable】3/8"screw holes at the bottom of the ball head and easy to install tripod, monopod, camera slider and mini tripod. With 1/4"....
Check Stock

sjlerst RC Spring RC Accessory, Upgrade Shock Absorber, Car Shock Absorber, Front&Rear for Axial for SCX10

  • ✿【Nice Replacement Accessories】☀Nice replacement accessories for the old or broken one..
  • ✿【Fine In Workmanship】☀Fine in workmanship and high in quality..
  • ✿【Double Spring Design】☀Double spring design for best performance..
  • ✿【CNC Machining Aluminum】☀CNC machining aluminum with anodizing, which makes it solid, durable and of exquisite appearance..
  • ✿【Widely Used】☀Suitable for Axial / SCX10 / D90 / TRX-4 RC crawler car..
Check Stock

Beall Collet Chuck, Wear-resistant and Durable Lathe Collet Chuck 10pcs NT40-ER32-70L for CNC Machining Center

  • As milling machine accessories, convenient to replace the broken one.
  • Scope of application: This milling chuck holder is used for CNC machining center.
  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
Check Stock

Beall Collet Chuck, Mill Machine Collet Wear-resistant and Durable with ER32 Wrench Collet Chuck Holder for CNC Machining Center

  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
  • As milling machine accessories, convenient to replace the broken one.
  • Scope of application: This milling chuck holder is used for CNC machining center.
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

  • 【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
  • 【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
  • 【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
  • 【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
  • 【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

46mm Low Profile Tripod Head with 3 Screw Adapter 3/8 to 1/4 Professional Aluminium 360 Rotating Panoramic Ball Head Max Loading 44lbs/20kg

  • 【LOW GRAVITY CENTER&ULTRA SOLID AND STABLE】: The ball head is designed with a low center of gravity, Durable anodized and CNC machining 46mm large ball diameter makes it extremely stable and the security slot protects your camera at all times. Tripod head Weights Only 0.38kg/0.84lbs, but Provides 55.1 lbs/ 25Kg Loading Capacity.
  • 【360 DEGREE PRECISION ADJUSTMENT PANORAMIC BALL HEAD】: U-shaped notch design make you can easily switch into vertical shooting from horizontal rotation flexible operation, making shooting faster switching. base is finely laser-engraved in 5° increments from 0°-360° for tracking progressive panning, The 360° horizontal scale is convenient for photographers to take multi-shot panoramic photography.
  • 【EXCELLENT LIGHT WEIGHT DESIGN DESIGN】： The low profile ball head adopts all-metal structure and Hollowed out quick release plate clip, 0.1 mm machining tolerance, anodic anodized, ultra high strength aviation aluminum alloy. It’s solid, stable and high quality.
  • 【WIDE COMPATIBILITY】: The ball head can be used with tripod, monopod,camera slider,for installing camera, DV, mobile phone, telescope. 1/4 " screw quick shoe plate screw and a 3/8 " thread tripod mount screw. Quick release plate compatible with Acra RRs, ....
Check Stock