Reviews Usb To Serial Converter Driver

EVISWIY PL2303TA USB to TTL Serial Cable Debug Console Cable for Raspberry Pi 3 Pack

  • 【Built-in PL2303TA Chipset】- this usb to ttl serial cable with built-in PL2303TA chip is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port..
  • 【Wide OS Support】- this usb ttl serial cable is supported by most common OSes such as win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux. (please refer to http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41, and then download the Prolific 2303 driver). If you are running Linux, drivers are already included in the kernel, no need to install anything..
  • 【Power Output】- this usb debug cable can be configured for either v5 or v3.3 power output. Built-in PL2303 chipset has an on-board DC-DC converter..
  • 【Wide Application】- this pl2303 usb ttl cable widely used for laboratories, product testing and low cost MCU communications etc..
Check Stock

TRENDnet USB to Serial 9-Pin Converter Cable, Connect a RS-232 Serial Device to a USB 2.0 Port, Supports Windows & Mac, USB 1.1, USB 2.0, USB 3.0, 21 Inch Cable Length, Plug & Play, White, TU-S9

  • USB: The USB to serial adapter supports USB 1.1 and it is compatible with USB 2.0 and USB 3.0 ports..
  • RS-232 SERIAL CONNECTOR: Connect RS-232 serial devices, such as modems or printers, using the widely supported USB standard found in most laptops and desktops today..
  • SUPPORTED OPERATING SYSTEMS: The USB to serial converter adapter is compatible with Windows and Mac operating systems. Windows 10, 8.1, 8, 7. Mac OS 10.11, 10.10, 10.9, 10.8, 10.7, 10.6.
  • FLEXIBLE CABLE: Integrated and flexible 540mm (21 in.) USB 2.0 cable accommodates most installation scenarios. Total cable length of 25 inches when including the RS-232 (9pin) and USB Type A..
  • EASY SETUP: Simple installation in seconds of the USB to Serial 9-Pin Converter Cable. Insert the your computer.
Check Stock

DSD TECH SH-RJ12A USB to RJ12 6P4C RS232 Serial Cable with FTDI Chip

  • USB to RJ12 6P6C RS232 FTDI Serial Converter APC PDU Cable for APC UPS 940-0144.
  • USB to RJ-12 PDU is a fully compatible replacement cable for APC 940-0144 and 940-0144a in a USB version.
  • Durable molded cable on both ends. Tested to perform as the original PDU 940-0144 Cable.
  • Compatible with APC metered and switched PDU AP78xx, AP79xx, AP86xx, AP88xx, AP89xx, etc.
  • FTDI chipset allows for easy installation on Windows, MacOS, and Linux. Linux has driver installed by default. Windows automatically downloads the driver from windows update Drivers are available for download if needed.
Check Stock

StarTech.com 4 Port Serial Hub USB to RS232/RS485/RS422 Adapter - Industrial USB 2.0 to DB9 Serial Converter Hub - IP30 Rated - Din Rail Mountable Metal Serial Hub - 15kV ESD Protection (ICUSB234854I)

  • RUGGED & RELIABLE: This industrial metal USB to serial adapter hub adds 4 RS-232/422/485 ports & 1 USB 2.0 port w/ 15kV ESD surge protection (level 4), IP30 rating & locking connectors on all ports.
  • 4 SERIAL PORTS: The ports on this USB to serial converter can be individually configured to RS232, RS422 or RS485 (2wire/4wire) at baud rates up to 921.6Kbps for devices like barcode scanners/printers.
  • MOUNTING OPTIONS: This metal mountable 4-port serial hub w/ 6ft (1.8 m) screw-lock USB cable incl. installs securely to a desk, wall or DIN rail using the built-in mounting ears & incl. DIN brackets.
  • FLEXIBLE POWER: This serial hub can be powered with either the 12V screw-locking power adapter or the 5V USB input, while each serial port (pin 9) can be set to 5V, 12V (power adapter required), or 0V.
  • WIDELY COMPATIBLE: To connect industrial grade equipment to any terminal, the USB to multiple DB9 male serial converter supports current and legacy Windows, Linux, macOS, as well as embedded platforms.
Check Stock

DTech Slim USB to Hard Drive Cable HDD SSD 3.5 2.5 Inch 22 pin SATA to USB 2.0 Adapter with Power Supply LED Indicators External Converter for Laptop Desktop Computer SATAIII Disk Data Transfer

  • 15+7 pin SATA adapter - USB to SATA power cable connects standard (15 + 7) 22 pin 2.5 inch or 3.5 inch external hard drive enclosure to your desktop....
  • USB to SATA cable is equipped with a DC Jack port, this slimline USB to hard drive serial ata adapter with power supply enables you to use 3.5 in HDD....
  • SATA 3 to USB converter with LED INDICATORS design for easy trouble shooting.
  • supports SATA III, II, I, and is compatible with Windows10 / 8/ 7/ XP/....
  • USB HDD sata power cable enables you to connect hard disc to android phone (with OTG function), or directly connected to your TV for watching movies....
  • Portable HDD SDD sata data to USB transfer cord is plug and play, no driver needed.
  • four non-slip mats can be glued to your serial ATA hard disk for....
Check Stock

DTECH USB to Serial Adapter Cable with RS232 DB9 Male Port FTDI Chipset Supports Windows 10 8 7 and Mac Linux - 4 Feet

  • (It's NOT 15 pin VGA Monitor Cable) The Male Serial to USB cable (9 pin to USB A male) allows your PC to connect RS-232 serial devices and programs that communicate through COM ports.
  • USB to serial adapter is designed for connecting serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode scanner, label writer, serial modem, digital camera, card reader, palm PC and digital organizer, etc.
  • USB to RS232 cord for Windows 10, 8.1, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later.
  • FTDI USB to serial cable is built with a high performance quality processor chip (FT232 Chipset), which makes it one of the most reliable com port to usb adapter on the market.
  • 4ft DB9 serial port to USB converter with LED light helps you check the connection status easily.
Check Stock

DTECH 10 Feet USB 2.0 to RS232 DB9 Serial Port Adapter Cable with FTDI Chipset Supports Windows 11 10 8 7 and Mac Linux

  • (NOT USB to VGA adapter) USB to serial adapter FT232 cable allows your computer to make communication with serial devices equipped with 9 pin female....
  • USB to male serial port adapter cord is designed for connecting Serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode....
  • (FT232 chip) Long FTDI serial cable to USB adapter for Windows 11,10, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later (9 wire pinout 1-9: DCD, RXD,....
  • COM port serial to usb converter is designed with a high performance quality processor chip (FT232RL), which makes this USB RS232 adapter one of the....
  • 10ft DB9 RS232 to USB adapter with 9 pin male to USB-A male gold plated connector uses crystal clear blue enrich injection, strong and beautiful.
Check Stock

DTECH FTDI USB to Serial Adapter Cable RS232 DB9 Male Port FT232RL Chipset Supports Windows 11 10 8 7 and Mac Linux 1.5 Feet

  • It's Male Serial to USB cable (9 pin com port to USB A male) that allows your PC to connect RS-232 serial devices and programs that communicate....
  • FT232RL USB to serial adapter is designed for connecting serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode scanner,....
  • 1.5ft short USB to RS 232 cord for Windows 11, 10, 8.1, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later.
  • FTDI USB to serial cable adapter is built with a high performance quality processor chip (FT232 Chipset), which makes it one of the most reliable com....
  • DB9 serial to USB converter with LED light helps you check the connection status easily.
Check Stock

StarTech.com 1 Port USB to Serial RS232 Adapter - Prolific PL-2303 - USB to DB9 Serial Adapter Cable - RS232 Serial Converter (ICUSB232V2)

  • MAXIMIZED PORTABILITY: This USB to serial RS232 adapter converts a USB port into an RS232 DB9 serial port to connect to, monitor, and control a serial device.
  • BROAD COMPATIBILITY: Compatible with your USB 1.0 or 2.0 ports, this USB to RS232 converter works with your Windows, Mac or Linux system.
  • FAST TRANSFER SPEEDS: Experience fast speeds with this USB to DB9 serial adapter, supporting a Baud Rate up to 921.6Kbps.
  • PORTABLE DESIGN: Powered by a USB port, this USB to RS232 serial adapter cable features a lightweight design that conveniently fits into your carrying case, making it ideal for professionals on the go.
  • Install in almost any laptop or desktop computer through broad operating system compatibility, including Windows 8.
  • Communicate efficiently with connected devices with high-speed 921Kbps support.
  • Portable and lightweight, the USB-Powered design requires no additional power adapter.
  • USB to Straight-Through RS232 DB9 Serial Adapter.
  • Compatible with Windows 8, Mac OS X and Linux.
  • USB-powered - no external power adapter required.
Check Stock

DTECH USB to RS422 RS485 Serial Port Converter Adapter Cable with FTDI Chip Supports Windows 11 10 8 7 XP Mac -1.5 Feet

  • USB to RS485/RS422 converter It easily lets you connect RS485 or RS422 device directly to your Laptop PC computer USB port (built with LED....
  • USB to RS485 cable adapter is Ideal for industrial environment -provides 600w surge protection and 15KV ESD isolated protection on signal pins to....
  • rs485 serial to usb converter is with high performance quality processor chip (FTDI-chipset FT232) and I/O auto conversion circuitry which makes RS....
  • 1.5 ft serial RS-422 RS-485 to USB adapter cable supports windows 11 10 8 7, Mac and more.
  • There are no IRQ and COM port conflicts, since the port do not require any additional IRQ, DMA, memory as resources on the system.
Check Stock

UGREEN USB to RS232 Adapter Serial Cable DB9 Male 9 Pin with PL2303 Chipset RS-232 Converter Cable for Windows 10 8.1 8 7 XP Vista, Mac OS, Linux, 6FT

  • How it works: This USB to rs232 adapter connects to serial devices via a USB port, such as serial digital cameras equipped with DB9, label writers, handheld computers, barcode scanners, PDAs, etc. This USB to serial adapter is widely used in shopping malls, offices, etc..
  • Multi-system compatibility: This usb to serial adapter is compatible with Win 7 8 10 Win XP Vista Mac OS Linux system. It would automatically update the driver for Win8 and above. For windows 7, Mac OS, please install the CD driver in the package. Note: Linux only supports the use of kernel version 2.6-5.2..
  • Multi-device compatibility: This USB to rs232 adapter is suitable for computers (computers or laptops) to connect various RS232 serial devices, such as cash registers, LED and LCD text displays, digital cameras, POS, Bar code scanners, door control system, printers, CNC controllers, scanners, etc..
  • Double shielding layer: This rs232 to usb has a thick tinned copper core, aluminum foil, metal braided mesh shielding layer, multi-layer shielding to isolate interference, which can make it smooth and not stuck when used. In addition, its baud rate supports 20bps to 256kbps, and serial communication data can be transmitted quickly..
  • Powerful chip: This rs232 to usb is equipped with PL2303....
Check Stock

EZSync FTDI USB Programming Serial Cable for Racermate, CompuTrainer, Velotron Racermate One, EZSync022

  • FTDI based USB to serial communication cable to connect your training equipment to computer USB port. Works with both Mac and PC..
  • Enables direct connection to computer USB port. Eliminates the 9-pin serial port adapters.
  • Superior FTDI technology based USB to serial adapter solution. Plug an play and no driver installation required.
  • Cable length is about 6 feet . Easily extendable with USB extension cable.
  • Rugged design with overmolded USB housing. Cable USB has two LED lights for data traffic indication..
Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock