Reviews Usb To Sata Bridge
Gigabyte GA-970A-DS3 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard
- CPU: AMD AM3+ FX/Phenom II/Athlon II processor. Chipset: North Bridge: AMD 970. South Bridge: AMD SB950..
- Memory: 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory. Dual channel memory architecture. Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules..
- Audio: Realtek HD audio codec. High Definition Audio. 2/4/5.1/7.1-channel. Support for S/PDIF Out. LAN: Realtek GbE LAN chip (10/100/1000 Mbit).
- Expansion Slots: 1 x PCI Express x16 slot, running at x16. 1 x PCI Express x16 slot, running at x4. 3 x PCI Express x1 slots. 2 x PCI slots. Support for AMD CrossFireX technology..
- Storage Interface: 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices. Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD..
- USB: South Bridge: Up to 12 USB 2.0/1.1 ports. Etron EJ168 chip: Up to 2 USB 3.0/2.0 ports on the back panel.
- Internal I/O Connectors: 1 x 24-pin ATX main power connector/1 x 4-pin ATX 12V power connector/6 x SATA 6Gb/s connectors/1 x CPU fan header/2 x system fan headers/1 x power fan header/1 x front panel header/1 x front panel audio header/1 x S/PDIF Out header/3 x USB 2.0/1.1 headers/1 x Clear CMOS jumper.
- Back Panel Connectors: 1 x PS/2 keyboard/mouse port. 6 x USB 2.0/1.1 ports. 2 x USB 3.0/2.0 ports. 1 x RJ-45 po....
Check StockANYOYO M.2 to USB Adapter USB 3.1 Gen 2 Bridge Chip 10 Gbps Converter Reader for M.2 NVME&SATA SSD Based M Key and B+M Key Support 2230 2242 2260 2280 22110 Size SSD
- [High Performance] - M.2 NVMe / SATA to USB adapter based on 10Gbps USB3.1 Gen 2 bridge chip(RTL9210B), can retrieve and backup data in high....
- [M.2 NVMe/SATA SSD] - Support for M.2 NVMe/SATA SSD Based on M & B+M KEY.NOT support SATA based B Key SSD. Applicable to sizes 2230 2242 2260 2280....
- [Hot Swap] - The M.2 to USB adapter without enclosure cover, can help fast heat dissipation with a thermal pad..
- [Plug and play] - Plug and play, can realize full potential of high performance..
- [Please Note] - PLS CHECK TO MAKE SURE YOUR DRIVE IS M.2 SSD. DO NOT support any B Key or B+M Key SSD based sata data transfer protocol or non-M.2....
Check StockASRock 970A-G/3.1 Socket AM3+/ AMD 970/ DDR3/ Quad CrossFireX/ SATA3&USB3.1/ M.2/ A&GbE/ ATX Motherboard
- CPU: Socket AM3+/AM3, Chipset: North Bridge AMD 970 & South Bridge AMD SB950.Supports Socket AM3 processors: AMD Phenom II X6 / X4 / X3 / X2 (except....
- Memory: 4x DDR3-2400+(OC)/ 2100(OC)/ 1866(OC)/ 1800(OC)/ 1600(OC)/ 1333/ 1066 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 64GB.
- Slots: 2x PCI-Express 2.0 x16 Slots (one runs x4), 2x PCI-Express 2.0 x1 Slots, 1x PCI Slot.
- SATA: 6x SATA3 Ports, M.2: 1x M.2 Port, Support M.2 PCI-Express 2.0 x4.
- Ports: 2x USB 3.1 Ports (1 Type-A, 1 Type-C), 4x USB 3.0 Ports (2 rear, 2 via header), 8x USB 2.0 Ports (4 rear, 4 via headers), 1x PS/2 Mouse Port,....
Check StockBewinner LGA775 Motherboard,DDR3 1066/1333MHz Computer Desktop Mainboard Integrated Chip Graphics/Sound Card/Network Card Suitable for Intel G41
- Chipset: North Bridge AMD 970 & South Bridge AMD SB950.
- Memory: 4x DDR3-2000(OC)/ 1866/ 1600/ 1333/ 1066 DIMM Slots, Dual Channel, Max Capacity of 32GB.
- Slots: 2x PCI-Express 2.0 x16 Slots (one runs at x4), 3x PCI-Express 2.0 x1 Slots, 2x PCI Slots.
- AMD AM3 Phenom II processor/ AMD Athlon II processor.
- Memory: 4x1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory.
- LAN: Realtek GbE LAN chip (10/100/1000 Mbit).
- Expansion Slots: 1 x PCI Express x16 slot, running at x16 (PCIEX16).
- 1 x PCI Express x16 slot, running at x4 (PCIEX4).
- Storage Interface: 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices.
- Support for RAID 0, RAID 1, RAID 5, and JBOD.
Check StockUGREEN M.2 Enclosure SSD SATA B B+M Key NGFF to USB 3.0 Aluminum Adapter 5Gbps M2 Hard Drive HDD External Case Tool-Free UASP for 2230 2242 2260 2280
- ...eed working M.2 NGFF solid state drives. The M.2 SSD Enclosure Box features a lightweight and slim size(L122*W40*H12 mm), making it portable to take with you and a perfect companion for your laptop while on the go. The soft white LED indicator lets you learn its working status easily..
- Perfect USB to SATA NGFF Data Bridge: UGREEN M2 NGFF-to-USB Adaptor supports UASP ,S.M.A.R.T & TRIM, and comes with a 1.5ft USB 3.0 to Micro USB 3.0 cable, easily connecting NGFF M.2 SSD to a USB PC for fast file backup,disk upgrade,disk clone,data recovery and storage expansion. Also supports USB-A devices like PS4,PS3,Xbox One,TV. Perfect for PCs with no M.2 socket is available. And great for tech nerds and high-end game players..
Check StockGeeekPi Raspberry Pi 4 SATA Storage, Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield (Only for Raspberry Pi 4B)
- Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board.
- X825 Case,please refer to ASIN: B093WYWVRX.
- Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD ..
- OS compatiable: All Raspberry Pi operating systems.
- USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller.
- Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack.
- Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included.
Check StockORICO 3.5 Hard Drive Enclosure 5Gbps Tool Free Transparent Computer External Hard Drive Enclosure for 3.5/2.5 SSD/HDD Up to 16TB-3139U3
- ...sure 3.5 to make the whole case cool and clear, the transparent design of the 3.5 hdd hard drive enclosure can helps you to monitoring the hard disk working status easily and distinguish the data you want to with no need to open the enclosure cover.
- ✔[5Gbps Fast Transmission Rate] — Adopt SATA Revision 3.0 5Gbps bridge solution that meanwhile the usb hard drive enclosure 3.5 support UASP accelerated transmission protocol and TRIM acceleration command which optimize CPU usage, greatly improve hard disk transfer efficiency. The usb3.1 sata enclosure also backwards with USB2.0 and USB1.1 port.
- ✔[Widely Compatibility] — The 3.5 usb external hard drive enclosure can support Windows, Linux and Mac OS operation systems and also a good helper when connecting TV, laptops, computers, PS4, XBOX One and so on, ideal tools when playing games.
- ✔[Tool Free Installation] — No any tools needed, just pull out open and insert your hard drive in the 3.5inch SSD enclosure and close the cover in one second.Automatic sleep for 30 minutes after to avoid frequent reading which can extend lifespan and support hot swap NOTE that the new hard disk must format before use.
Check StockM.2 NVME Enclosure, Electop USB 3.1 to Type C Adapter PCIe 10Gbps Gen 2 ,Support Most PCIe NVMe M.2 M Key SSD of 2230/2242/ 2260/2280,Solid Mobile Hard Disk Box
- FAST Functional Speed : Super fast read & write up to 900+ Mb/s. Nearly 2X as fast as traditional SATA SSDs which adopts the latest Chips of USB3.1 Gen1 to PCIe Gen3 x 2 lane bridge controller to achieve 10Gbps USB data transition..
- Wide Compatibility : Easy Setup,light and Portable, Plug and Play, No Driver required. Support most PCIe NVMe M2 M Key SSD,perfectly fit with 2280 / 2260 / 2242 / 2230 form factor and compatible well withCompatible with Windows XP / 7 / 8 / 10 and MAC OS..
- Quick Heat-dispatching: Advanced Aluminum alloy shell and Two side of heat-dispatching Holes to dissipate the heat from the NVMe drive to protect it from over heating, which has the best cooling effect,ensuring a long life expectancy from your drive..
- Easy to Use : Come with Type C to USB 3.1 cord & USB C Adapter,Make connection more easy. .
- Please Kindly Note: High Speed USB 3.1 to M.2 NVME SSD Storage Case only for M-Key M.2 SSD (PCI-E NVMe-based), doesn't support B-Key SSD(SATA-based) and M-Key M.2 SSD(PCI-E AHCI-based). .
Check StockGeekworm T300 V1.1 2.5 inch SATA SSD/HDD Shield Storage Expansion Board Compatible with Jetson Nano A02/B01/2GB/4GB Developer Kit
- Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
- Ideal storage solution for Jetson Nano- 2.5" SATA HDD/SSD Shield.
- for the T300 metal case, refer to ASIN: B07W7CNSR8.
- for the T130 mSATA SSD shield, refer to ASIN: B088N6VZL8..
- A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
- Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed.
- Intelligent power management - Automatic powering off when system shutdown.
Check StockSATA to USB 2.0 Cable Adapter for 2.5 HDD SSD Hard Drive Connector 22 Pin 7+15 SATA 1 2 3 External Converter
- USB 2.0 to SATA 15+7 pin connector cable allows you to connect any standard 2.5" or 3.5" SATA HDD mobile enclosure to your computer/laptop via USB 2.0....
- Add drive space to your laptop by connecting to a SATA 2.5" SATA SSD or HDD using this SATA to USB cable. You can connect to an external drive to: add....
- Extended Compatibility: USB 2.0 sata hard drive adapter is compatible with PS4, Windows 10/8.1/8/7/Vista/XP/2000/98, Mac OS X. Supports 2.5''/3.5''....
- Up to 480Mbps High Speed: This is USB 2.0 version, backward compatible with USB 1.0, data transfer rates up to 480Mbps..
Check StockGIGABYTE GA-970A-D3 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard
- CPU: Support for AMD AM3+ FX. AM3 Phenom II. Athlon II processor. Chipset: North Bridge: AMD 970, South Bridge: AMD SB950.
- Memory: 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory. Dual channel memory architecture..
- Audio: Realtek ALC889 codec. High Definition Audio. 2. 4. 5.1. 7.1-channel..
- Expansion Slots: 1 x PCI Express x16 slot, running at x16. 1 x PCI Express x16 slot, running at x4. 3 x PCI Express x1 slots. 2 x PCI slots.
- Storage Interface: 6 x SATA 6Gb. s connectors. Support for RAID 0, RAID 1, RAID5, RAID 10 and JBOD.
- 2 x USB 3.0. 2.0 ports. 1 x RJ-45 port. 6 x audio jacks (Center. Subwoofer Speaker Out..
- Audio: Realtek ALC889 codec. High Definition Audio. 2. 4. 5.1. 7.1-channel. Support for S. PDIF Out..
- Back Panel Connectors:1 x PS. 2 keyboard. mouse port. 1 x optical S. PDIF Out connector. 8 x USB 2.0. 1.1 ports..
- Internal I. O Connectors:1 x 24-pin ATX main power connector. 1 x 8-pin ATX 12V power connector..
Check StockStarTech.com eSATA Enclosure - for 3.5in SATA HDD - USB 3.0 / eSATA - Trayless - Metal - External Hard Drive Enclosure - HDD Enclosure
- Easily connect and hot swap 3.5 in. SATA III hard drives, through eSATA or USB 3.0 with this trayless hard drive enclosure.
- Access your files how you prefer with support for USB 3.0 and eSATA.
- Simple set up with plug-and-play functionality.
- With a sleek, metal design this hard drive enclosure is a perfect desktop companion for your Mac or PC.
- Supports SATA I, II, and III (up to 6Gbps) / eSATA enclosure / Hard drive enclosure / External hard drive enclosure / HDD enclosure / 3.5 hard drive enclosure / SATA enclosure / USB 3.1 enclosure / 3.5 SATA hard drive enclosure / External HDD enclosure / SATA drive enclosure / External SATA enclosure / 3.5 external hard drive enclosure / Hot swap case / HDD case / Hard drive enclosure USB 3 / eSATA hard drive enclosure / SATA external hard drive enclosure / SATA to USB enclosure / 3.5 hard drive enclosure USB 3 / Removable hard drive enclosure.
Check StockAGPtek SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5", Compatible with USB 1.1/2.0/3.0, with External AC Power Adapter Included
- ◆ USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
- ◆Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your ide to usb adapter to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
- ◆ Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
- ◆ AGPtEK sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable..
- ◆ This usb sata ide adapter is easy to use and plug & play, no drivers needed..
Check Stock