Reviews Usb To Rs23ttl Converter 2

CP2102 6 in 1 USB to TTL Serial Adapter Module USB to TTL 485 232,TTL to 232 485,RS232 to 485 + 4P Dupont Cable Jumper Wire Female to Female for Nextion Display Beitian GPS Arduino Windows

  • -cp2102 serial adapter module supports usb to ttl, usb to rs232, usb to rs485, ttl to 232, ttl to 485, 232 to 485..
  • -USB specification 2.0 not 3.0, compatible with arduino,Windows XP/7/8/10 32bits/ 64bits, Linux etc..
  • -You need to set the dip switches for different conversion purpose..
  • -Before make 6 in 1 usb to ttl module work, you need to install cp2102 driver..
  • -cp2102 usb to ttl adapter widely used with nextion display, beitian gps, esp-01s adapter, sim7000a board etc..
Check Stock

Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller

  • BN-880 is suitable for Open source flight controller, not for flight control with SCM.
  • Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
  • Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it.
  • DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
Check Stock

DIYmalls BN-180 GPS Module TTL Dual Glonass GPS + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D Betaflight Flight Control

  • BN180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to....
  • When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold....
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 180 gps doesn't have flash and compass. If you need it, please buy bn-880 gps module via "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

DaFuRui 5PCS MAX3232 RS232 to TTL Converter 3.3V to 5V DB9 Female RS232 Serial Prot to TTL Converter Module Root Connector for Equipment Upgrades Like DVD

  • ★MAX3232 3.3V to 5V DB9 Male RS232 Serial Prot to TTL Converter Module..
  • ★Program the type of microcontroller: STC/STM32 / NXP / Renesas MCU / NEC..
  • ★Used in radio modification,mobile phone brushing,XBOX360 brushing machine,GPS,DVD brushing, hard disk repair,set-top box upgrade..
  • ★Package Include:5PCS x MAX3232 RS232 to TTL Serial Port Converter Module and 20pcs Dupont Lines..
Check Stock

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

  • BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory..
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
  • The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place..
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us.
Check Stock

WITMOTION USB-UART 6-in-1 USB to Serial Converter Multifunctional USB to TTL/RS485/232 TTL-RS232/485 232 to 485 Universal Adapter Module with CP2102 Compatible with Windows 7/8/10,Linux Arduino

  • 【 Multi-functional】6-in-1 Multifunctional Serial adapter supports USB-TTL, USB-RS232, USB-RS485, TTL-232, TTL-485, 232-485 converting function,....
  • 【 Superior Compatibility】USB specification 2.0 is compatible with Windows XP/7/8/10 32bits/ 64bits, Linux, Wince, Mac, Vista, etc..
  • 【 Robust Design 】Equipped with superior-quality mode switch(endurable), a status indicating LED(easy to connect), upgraded TO5 fuse (excellent....
  • 【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the....
  • 【 What You Get 】1x WitMotion 6-in-1 serial adapter + 4x Dupont cables + 1x Welcome card, well-packed by an antistatic bag.
Check Stock

DTECH USB to RS422 RS485 Serial Port Converter Adapter Cable with FTDI Chip Supports Windows 11 10 8 7 XP Mac -1.5 Feet

  • USB to RS485/RS422 converter It easily lets you connect RS485 or RS422 device directly to your Laptop PC computer USB port (built with LED....
  • USB to RS485 cable adapter is Ideal for industrial environment -provides 600w surge protection and 15KV ESD isolated protection on signal pins to....
  • rs485 serial to usb converter is with high performance quality processor chip (FTDI-chipset FT232) and I/O auto conversion circuitry which makes RS....
  • 1.5 ft serial RS-422 RS-485 to USB adapter cable supports windows 11 10 8 7, Mac and more.
  • There are no IRQ and COM port conflicts, since the port do not require any additional IRQ, DMA, memory as resources on the system.
Check Stock

USB to TTL Adapter USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC ‘FT232RL’

  • Built-in a new and original FTDI IC device ‘FT232RL’, which handles all the USB signalling and protocols. TTL levels of +5V and +3.3V adjustable....
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND connections.
  • POW(power), RXD/TXD transceiver communication LED indicator....
  • Windows 8 and newer OS, Linux and Mac OS will install FTDI driver automatically, except Chrome OS. For details of OS compatibility and installation....
  • Typical applications: USB to RS232/RS422/RS485 converters, Support EEPROM, Vendor ID re-write, unbrick routers and Mprog3.5, interface to GPS modules,....
  • You will get: 1 x Moyina USB to TTL Module + 1 x Jumper + 10 x Dupont Cables (7.9”, female to female), which are packed by antistatic bag. We offer....
Check Stock

2Pack PL2303 PL2303HX USB to TTL Serial Adapter 3.3V Debug Cable USB to RS232 TTL Converter 4 Pin Female Socket Download Cable PL2303HX Cable

  • Specific Interface A: USB 2.0 type A Male Port.
  • Interface B: 4 pin Female Socket flying leads. Prolific chipset on the PCB board....
  • USB to TTL serial cable 3.3V (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND(ground), RX and TX at....
  • TTL to USB Converter Support Windows XP/Vista/7/8.
  • Ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash....
  • Application:PL2303 USB to TTL serial adapter is designed to be used for USB to TTL electronic projects, easy to connects devices with 3.3 V logic....
  • Note: 3.3V and 5.0V output is set (this is the power supply to the microcontroller, upgrade machines do not need the small plate) unplugged from the....
Check Stock

TRENDnet USB to Serial 9-Pin Converter Cable, Connect a RS-232 Serial Device to a USB 2.0 Port, Supports Windows & Mac, USB 1.1, USB 2.0, USB 3.0, 21 Inch Cable Length, Plug & Play, White, TU-S9

  • USB: The USB to serial adapter supports USB 1.1 and it is compatible with USB 2.0 and USB 3.0 ports..
  • RS-232 SERIAL CONNECTOR: Connect RS-232 serial devices, such as modems or printers, using the widely supported USB standard found in most laptops and desktops today..
  • SUPPORTED OPERATING SYSTEMS: The USB to serial converter adapter is compatible with Windows and Mac operating systems. Windows 10, 8.1, 8, 7. Mac OS 10.11, 10.10, 10.9, 10.8, 10.7, 10.6.
  • FLEXIBLE CABLE: Integrated and flexible 540mm (21 in.) USB 2.0 cable accommodates most installation scenarios. Total cable length of 25 inches when including the RS-232 (9pin) and USB Type A..
  • EASY SETUP: Simple installation in seconds of the USB to Serial 9-Pin Converter Cable. Insert the your computer.
Check Stock

DTECH USB to TTL Serial 3.3V Adapter Cable TX RX Signal 4 Pin 0.1 inch Pitch Female Socket PL2303 Prolific Chip Windows 10 8 7 XP Vista (6ft, Black)

  • 6 ft USB to TTL serial adapter (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port.
  • A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet USB to TTL serial cable 3V3 (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND.
  • PL2303 Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 4 pin 3.3V USB to TTL converter cord Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE.
  • ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc..
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable TX RX Signal 3 Pin 0.1 inch Pitch Female Socket FT232RL Chip Windows 11 10 8 7 Linux MAC OS 6ft Black

  • 6 ft USB to TTL serial adapter (with 3 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (3 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and 3.3V UART signals can be individually inverted by configuring the EEPROM.
  • 3V3 TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

  • Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB....
  • Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5.
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved.
  • Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in....
  • The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold....
Check Stock