7.83HZ Pulse Generator 5V 0.1A Schumann Wave Ultra-low Frequency Audio Resonator for Helping Sleep
- ✔ MINI USB PORT POWER SUPPLY -- Adopted of Mini Usb port power supply, typically+5V 0.1A,and comes with USB cable.
- ✔ LOW STATIC CONSUMPTION -- Imported ultra-low static power consumption main control IC,to make the waveform more stable.
- ✔ 7.83HZ PULSE SQUARE WAVE -- Output 7.83HZ pulse square wave, whose duty cycle is 50%. Frequency can be fine-tuned for correction.
- ✔ ULTRA-LOW SCHUMANN WAVE -- This product is Schumann wave 7.83HZ very low frequency generator, features high accuracy and stability.
Check Stock
Motorized Rotating Display Stand, 360 Degree Electric Rotating Turntable for Photography Products Display, Jewelry, Watch, 3D Models, Cake and Collectibles
- ...n and operation It's very simple to use. In addition, there are instructions in this listing‘s description. If you don't understand it, please refer to it. Thank you..
- QUIET AND SMOOTH ROTATION: This Turntable Runs Quietly And Smoothly, Won't Affect Your Video Shooting.it Is Recommended To Use Usb Plug-in Ac Power Supply, Which Can Rotate Continuously And Provide Greater Load And Power. The Second Is To Use Rechargeable Batteries. These Two Methods Can Provide Good Use Effect And Load-bearing Effect. Try Not To Use The Power Supply Mode Of Three Ordered Aaa Batteries. This Mode Cannot Completely Drive The Product..
- FOUR POWER SUPPLY MODES: USB Plug-in AC Power Supply(Suggest：⭐⭐⭐⭐⭐).
- USB Connection Power Bank Power Supply(Suggest：⭐⭐⭐⭐⭐).
- Rechargeable Battery(Suggest：⭐⭐⭐).
- Powered By Three Ordinary AAA Batteries(Suggest：⭐).
- MAXIMUM LOAD: The Maximum Load Is 4kg－3kg－2kg Depending On The Speed and Power supply mode.Please use USB Plug-in AC Power Supply mode..
- WIDELY USE: Used for theme exhibition, window display, product display, photograph show, cube spin display, advertising, assist in shooting product video, provide customer 360 degree view of your product..
Check Stock
Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device
- VL817 main control chip -- USB3.0 HUB expansion board aims to solve the problems of insufficient USB interface on the main board and insufficient power supply caused by the increase of USB peripherals.Equipped with VL817 main control chip scheme, the main control board performance is stable and the transmission is stable and safe. It uses USB3.0 communication interface and HUB chip expand 4 USB interfaces to ensure high-speed data transmission of the interface..
- 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
- Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
- Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10....
Check StockT-HOT Battery Eliminator Dual AA Battery Power Supply Adapter Replace 1-4pcs AA Battery 1.5V 3V 4.5V 6V
- ☛Function: Replace 1 to 4pcs LR6 AA battery power supply cord,This eliminates the need for 1 to 4pcs 1.5V LR6 AA batteries.
- AA model is 1.5A, 2AA is 3V, 3AA is 4.5V, 4AA is 6V.
- ☛Easy to Use: 2in1 design,can powered 2pc AA devices at the same time.
- Power supply from USB charger,USB power bank,car USB charger and more USB adapter,come with US Plug USB Power Adapter, easy to use.
- ☛Battery Replacement: With this battery replacement power supply, you don't need to buy a lot of replacement batteries when the batteries run out,saving you more time and money.
- ☛ Widely Used: Suitable for Radio,electric toy, holiday LED lights, Clock ,Calculator, power remote controller, keyboard and more AA Battery power supply devices.
- ☛Note: AA Fake batteries cannot be used in parallel, only in series,Can not be mixed with a real AA battery.
Check StockTP-Link N150 Wireless 3G/4G Portable Router with Access Point/WISP/Router Modes (TL-MR3020)
- Interface: 1 10/100Mbps WAN/LAN Port, USB 2.0 Port for 3G modem, a mini USB Port for power supply.
- Button: Quick Setup Security Button, Reset Button, Mode Switch.
- Wireless Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b.
- Ships in Certified Frustration Free Packaging.
- Compatible with Select ATT/Verizon/Sprint/T Mobile USB Modems.
- Industry leading 2 year warranty and unlimited technical support.
Check Stock
Volvox sp, Living
- 【High Precision, Low Ripple, Big LED Display, Output Switch Control】NICE-POWER 120V 3A DC power supply is a professional power supply regulator with high accuracy of 0.01V and 0.001A, low ripple of DC power supply. The backlit 4-digits LED display has the advantage of high resolution, which can be easily viewed even if you are in low-light conditions . Adjust the required voltage and current through the output switch button without the actual output power, safer and more energy efficient..
- 【CE & FCC Certification, Multiple Protection, Various Application】Lab power supplies have passed CE & FCC Certification. 120V DC power supply has multiple protections: overvoltage protection, overcurrent protection, overheating protection, over power protection, short circuit protection, leakage protection. DC power supply is suitable for LiFePO4 battery charging, arduino project, laboratories, schools, electronic maintenance , electrolysis, electroplating, lamp test, aging test, DIY, etc..
- 【Front Power Switch , Stable Vertical Design, Lightweight and Portable】The front power switch is very convenient. Bench power supply adopts stable vertical design, DC power supply has shock absorber rubber feet at the bottom, so it will be safer and more stable during ....
Check Stock
ART USB Dual Pre Two Channel Preamplifier/Computer Interface (USBDUALPREPS)
- USB Dual Pre is powered via the USB bus. Internal 9 Volt battery, or optional external 12V power supply (or any combination of USB, battery & power supply) can be used depending on application. When running powered by battery alone, you should expect in excess of 50 hours of operation with phantom power off. Battery life will drop to approximately 20 hours (depending on microphone) when phantom powering is engaged (still enough time to get through an average session)..
- Built-in low noise +48 Volt phantom power supply allows you to power up to 2 microphones as well as the preamplifier when running from any power sources including the USB bus..
- 1/8-inch TRS mini headphone jack with level and monitor mix controls on the rear allow for latency free local monitoring of the inputs while recording as well as playback monitoring of the USB bus. monitor mix is also routed to the 1/4-inch TRS balanced outputs. This lets you use the 1/4-inch outputs as either preamplifier outputs or as the monitor feed to your powered monitors..
- Fully compliant with the USB 1.1 specification and uses USB adaptive mode for playback and USB asynchronous mode for record..
- Works with the USB audio device drivers built into Windows 98SE/ME/2000/XP/Vista and Apple OS9.1/OSX computer....
Check StockTosuny PCIE to USB 3.0 2Port Express Card Low Profile PCIExpress to Internal 2 Port 19Pin Header USB 3.0 Card Adapter
- 【USB3.0 pin header】 the back of the card is equipped with two USB3.0 19pin pin headers. If the front of the chassis has a USB3.0 interface, you....
- 【4 Independent locks】 PCI-E card each interface is equipped with an independent protection lock. When the external USB device is short-circuited....
- 【4 solid capacitors】PCI Express adapter each interface is equipped with a separate regulator capacitor to ensure uniform supply of each interface.....
- 【Super Power Supply (4 Power Supply Modules)】: The card comes with a four-phase power supply module, no phase power supply only provides one....
- 【High-quality baffle】 1.The high-quality fixed baffle is used to fix the expansion card in the chassis. And these baffles, treated with flex....
Check Stock
Kensington SD3600 Universal Dual Display USB-A Docking Station for Windows, MacBooks and Surface (K33991WW)
- ...uding 1080P video via HDMI and DVI Single display resolution of up to 2560x1600 @60Hz (including QHD 2560x1440) via HDMI add a third monitor using a USB-A to DVI Display Link adapter (Kensington part #K33974AM or similar).
- DVI-to-VGA and DVI-to-HDMI adapters included for greater monitor compatibility power supply included to power the dock and all the ports (does not supply power to a laptop).
- Power supply included to power the dock and all the ports (does not supply power to a laptop) Vesa mountable (see Kensington mounting bracket part #K34050WW) Kensington lock slot (see part#K65035AM for compatible lock) for Macbooks download the latest Display Link drivers from the Display link website.
- Dual 1080p HD video to external monitor via HDMI, VGA or DVI.
- 2 front USB 3.0 ports that support high-speed data transfer up to 5Gbps.
- 4 rear USB 2.0 ports for peripheral accessories like a keyboard and mouse.
- VESA mounting plate (Dock Mount K33959WW sold separately) allows the dock to be taken off the desktop and placed on the back of an external monitor.
- Display settings software allow you to easily make changes to your preferences.
Check Stock
QIUCABLE USB C to Cigarette Lighter Adapter - 3ft 12V USB Type-C Male Plug to Cigarette Lighter Adapter Cable, 12 Volt USB-PD to Car Cigar Adapter Female Socket Power Cable
- Feature: PD Type-C to Car Cigarette lighter Female 12V Adapter Cable, enable you to power your 12V device using an external PD power supply or PD charger that have USB-C PD capabilities, perfect for your 12V car devices while camping or indoors(Max 12V/36W)..
- USB Type-C to Cigarette Lighter Socket Converter Cable: Build-in the 12V PD Emulator Trigger at USB Type-C male end, The IC chip communicate with the USB-PD device and requests 12V, Then the USB-C Cigarette lighter converter cable can charge your 12V car devices..
- Max Output Power 36W = 12V * max output current of your PD power supply @12v (The 12V output current of the PD power supply is currently 3A at most). More power than USB to cigarette lighter adapter step up cables(max power 12V/8W)..
- Power for 12V Car Devices - Power your Car air purifier, Driving recorder, dash cam, GPS, car interior Led lights, Garmin or other FM traffic receiver, car fan, and other automotive devices with power less than 36W, suitable for using 12 volt car devices while indoor or outdoor..
- ATTENTION: If you connect it to a power supply that is not....
Check StockBewinner Mini PCI-E, PCI Express Extender to Internal 2 Port 19Pin Header Fast 5Gbps PCI-Express USB 3.0 Card Adapter with Low Profile for winXP, win7 win8 win8.1 win10
- ...-circuited and the current is too high, the power can be cut off instantly to protect the peripherals and the computer from being damaged. After the fault is removed, the system automatically returns to normal..
- 4 Solid Capacitors: Each interface is equipped with an independent regulator capacitor to ensure a smooth supply of each interface. And the capacitors using solid-state chip, can withstand up to 250 high temperature..
- Super power supply module: Each USB 3.0 interface is equipped with an independent power supply module, and each interface is exclusively provided 2A power supply, a total of 8A power supply. Besides, the inductor adopts 12mm * 12mm closed super-power inductors..
Check Stock
Benfei 15 Pin SATA Power Y-Splitter Cable 8 Inches - 2 Pack
- Y-SPLITTER SATA CABLE powers two Serial ATA HDD, SSD, optical drives, DVD burners, and PCI cards to a single connection on a computer power supply.
- Snug-fitting drive SATA connector and channel guides on the power supply connector provide a secure connection that won¡¯t accidentally disconnect.
- UPGRADE COST SAVER SATA power cable spares the expense of upgrading an existing power supply to connect a new SATA drive.
- Cost-effective 2-Pack provides spare SATA extension power cables for new installations or repairs..
- DIY or IT installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
- 8 inch cable harness (not including connectors) provides sufficient length for internal cable management in most configurations.
- HEAVY DUTY SPLITTER with 2 SATA 15 pin female connectors and 1 SATA 15 pin male is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA hard drives to a power supply.
- Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
- COMPATIBLE with popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, Asus 24x DVD-RW S....
Check StockDarklab Hover Power Supply Box for Tattoo Machine Cordless Digital Magnetic Two USB Ports and Bluetooth Compatible
- TOUCHLESS INTERFACE – Enjoy a touchless interface with the Hower power supply for tattoo machines. It’s designed to level up on tattooing....
- DIGITAL DISPLAY SCREEN – An easy-to-read display screen rotates 180 degrees and shows voltage, speed, session and machine runtime on this digital....
- TWO USB PORTS – Easily switch between two machines using the dual USB-A and USB-C port machine inputs on this tattoo machine power supply..
- BLUETOOTH COMPATIBLE – Take advantage of the Bluetooth compatibility of this wireless tattoo power supply box. Pair it with the upcoming Darklab....
- SIMPLY WAVE YOUR HAND – Easily turn the supply on and off with a wave of your hand. The Hover touchless tattoo power supply magnetic mounted base....
Check Stock
