Reviews Usb Audio Attenuator

Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use

  • 20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
  • PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
  • MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
  • PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
  • AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.
Check Stock

TCC TC-754 BLACK RIAA Phono Preamp With Three Switchable Aux Inputs; includes optional PREMIUM HIGH POWER AC Adaptor

  • RIAA freq response: 20hz-20,000hz +/- 0.25dB, MM phono gain: 39dB.
  • Resolution: 16 bit with selectable 32/44.1/48 kHz sampling rate, USB compatibility: 2.0 and earlier.
  • Software record level control AND analog output attenuator.
  • AC adaptor, USB cable, and stereo RCA cable included.
  • OS compatiblity: Windows 98SE/ME/2000/Server2003/XP/Vista/Win7/Win8.
Check Stock

JL Audio HD-RLC Amplifier Remote Level Control and Cable

  • The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:HD-Series: All modelsXD-Series: All modelsMHD-Series: All....
  • When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall....
  • The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable..
Check Stock

MST VC Low Pass Filter Eurorack Module

Check Stock

Hantek HT1008C 8 CH Automotive Lab Scope, HT30A/HT201/HT25 Included

  • 78 types of automotive test functions, including ignition, sensors, Bus diagnosis, engine & charging curcuits.
  • 100kHz bandwidth, 2.4MSa/s, 8 channels, 12 bits resolution, 4K memory, 400V max input.
  • Data saved as txt/csv/rfc/xls/doc/jpg via USB 2.0 interface.
  • Comes with 1 HT25 secondary ignition probe.
  • Bonus kits inlude 1 HT201 attenuator and 1 HT30A.
Check Stock

Fairfield Circuitry The Accountant

  • No integrated circuits in the signal path Transformer-balanced input and output Selectable output transformer loading resistors by an internal T4-style electro-optical attenuator Very simple to operate with only two main controls, Gain and Peak Reduction A big meter shows gain reduction or output level at two different reference levels Hardwire bypass switch for easy comparisons XLR and TRS input and output jacks for flexible connections Link jack and switch for conne.
  • The COMP-3A is a single-channel vintage-style Compressor/Leveler.
  • The signal path uses only discrete components like resistors, capacitors and transistors, and the input and output is transformer balanced using two different transformers, each one optimized for its purpose.
  • This is the way audio components were built before integrated circuits became available.
  • Integrated circuits are small and cheap and widely used in most modern designs.
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack,in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock

MDS-200A Amp 1600V Three-Phase Diode Module Bridge Rectifier Power Module Provide for Single Phase Rectification

  • Measuring power range -75 ~ +16 dBm (external RF attenuator can be extended to 100dBm).
Check Stock

Hantek DSO2C10 Digital Storage Oscilloscope 100MHz Bandwidth 2CH Dual Channel 1GSa/s 8M Memory Depth

  • 78 types of automotive test functions, including ignition, sensors, Bus diagnosis, engine & charging curcuits.
  • 100kHz bandwidth, 2.4MSa/s, 8 channels, 12 bits resolution, 4K memory, 400V max input.
  • Data saved as txt/csv/rfc/xls/doc/jpg via USB 2.0 interface.
  • Comes with 1 HT25 secondary ignition probe.
  • Bonus kits inlude 1 HT201 attenuator and 1 HT30A.
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (6DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (10DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (40DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (20DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock