Reviews Unregulated Input

interVOLT 12V DC Stabilizer / Voltage Regulator / Power Conditioner / Battery Charger (10-16 VDC Input - 12.5/13.6 VDC Output) - Heavy Duty 7A DC-DC Isolated - Model SPCi121207

  • PROTECT VALUABLE ELECTRONIC EQUIPMENT - A small investment in a professional grade external power conditioner saves money, frustration and time..
  • EXCELLENT LINE AND LOAD REGULATION - 7A continuous load rating. 93% efficiency. Highly stable under a range of input conditions (10 - 16 VDC)..
  • SWITCH SELECtABLE OUTPUT VOLTAGE (12.5 or 13.6 V DC) - Galvanic isolation between input and output - Wide operating temperature (-25 to +45 C).
  • MARINE GRADE - Corrosion resistant materials.
  • Conformally coated circuit board - Compact Size - Suitable for high/low temperature environments.
  • STABILIZE VOLTAGE from alternators, generators, batteries, solar panels and unregulated DC power supplies in cars, trucks, RVs, boats, communications and industrial equipment.
Check Stock

Metabo HPT Reserve Air Tank | Five Quick Connect Couplers | 10-Gallon Capacity | ASME Certified | UA3810AB

  • APPLICATION: Ensure the air pressure being supplied to all nailers is sufficient, and that the required PSI remains constant - even if the compressor is 200 or more feet away.
  • SHUT OFF: Industrial ball (Shut-off) valve on input allows tank to be filled and disconnected from compressor without it draining itself.
  • CAPACITY: 10-gallon capacity ensures sufficient pressure to power five or more nailers at the same time.
  • COUPLERS: 5 quick connect couplers (4 unregulated + 1 regulated) allow for easy one handed connections of hoses and/or splitters.
  • GAUGES: Industrial pressure gauges are encased in steel for high durability.
Check Stock

Precision Parts PowerBass XL1250 500 Watt Bluetooth Waterproof Powersports UTV Marine Sound Bar and XLSBCLAMP2 CClamps

  • The XL series sound bars were developed for the growing power sports market including UTV and marine applications where electronics must withstand....
  • Installation is a 3 wire power and ground with a switched 12v input allowing the sound bar to be turned on and off by ignition or a rocker switch and....
  • 12 Speaker 500 watt Amplified Bluetooth Powersports Sound bar | IPX6 Rated | 6 x 3.5" Square Poly Cone Woofers | 2 x 3" Full Range Marine Grade Poly....
  • Audible Power On/Off Notifications | Built In DSP Processor | Bluetooth and Wired Inputs | 2 Volt Line Output | Auto Turn On/Off Circuit | Waterproof....
  • Inputs: Bluetooth/3.5 mm Wired | Power Supply: Unregulated PWM | Height: 4.9" | Width: 33.75" | Depth: 4.4" | 2-ohm Power: 250 watts x 2 | Peak Power:....
Check Stock

ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)

  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock

REXQualis Nano V3.0, 3pcs Nano Board CH340 / ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 with 3 Cable)

  • √ REXQualis Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • √ REXQualis Nano is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • √ REXQualis Nano is Using Atmel Atmega328P-AU MCU, Support ISP download and USB download, Power via the Mini-B USB..
  • √ The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock

AITRIP 10PCS for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Microcontroller Board, Compatible with Arduino Electronics Development Board

  • This board is using the chips ATmega328P and CH340, not FT232 as official Arduino.
  • More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • you will get 10pcs Mini Nano V3.0 ATmega328P 5V 16M Microcontroller.
Check Stock

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

  • The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • Support for external 5V~12V DC power supply, Support power supply by 9V battery..
  • The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..
Check Stock

AITRIP 3pcs for Arduino Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module with 3pcs USB Cable Compatible with Arduino IDE

  • *The Nano is using the chips ATmega328P and CH340, Replace FT232RL..
  • *It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • *Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • *The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • *Arduino Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers)..
Check Stock

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

  • ...y of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

DORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0

  • The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
  • It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
  • More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
Check Stock

uxcell 10pcs 3 Pins Unipolar Hall Effect Sensor Magnetic Detector 2.5-20V

  • Superior Temp. Stability for Automotive or Industrial Applications.
  • 4.5 V to 24 V Operation … Needs Only An Unregulated Supply.
  • Open-Collector 25 mA Output … Compatible with Digital Logic.
Check Stock

Bridgold 30pcs A3144 3144 Hall Effect Sensor for High-Temperature Operation，3Pins.

  • Superior Temp. Stability for Automotive or Industrial Applications.
  • 4.5 V to 24 V Operation … Needs Only An Unregulated Supply.
  • Activate with Small, Commercially Available Permanent Magnets.
Check Stock

The Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)

  • ...y of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock