Reviews Universal Crowfoot Coupling

HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
  • 3 Different types of sockets cover various situations of oxygen sensor locations.
  • Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
  • Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

Heyiarbeit 3mm to 3mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 2Pcs

  • [MATERIAL] - Universal joint shaft coupling is made of high quality brass, which is strong, wearproof, and durable.
  • [FEATURE] - Provides torque transmision and alignment, cost effective coupling design, which is very flexible and easy for use.
  • [FUNCTION] - Shock mitigation, noise reduction.
  • when the rated torque is exceeded, the coupling can protect the safety of the linkage.
  • [APPLICATION] - The universal joint coupling is compatible with straight shaft motors, and it is used for model cars, model ships, robots and other types of metal transfer.
Check Stock

Heyiarbeit 3mm to 4mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 2Pcs

  • [MATERIAL] - Universal joint shaft coupling is made of high quality iron, and then electroplated, much stronger, wearproof, durable to use.
  • [FEATURE] - Provides torque transmision and alignment, cost effective coupling design, which is very flexible and easy for use.
  • [FUNCTION] - Shock mitigation, noise reduction.
  • when the rated torque is exceeded, the coupling can protect the safety of the linkage.
  • [APPLICATION] - The universal joint coupling is compatible with straight shaft motors, and it is used for model cars, model ships, robots and other types of metal transfer.
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock

Heyiarbeit 5pcs 4mm to 4mm 2 Section Rotatable Universal Joint Coupling Shaft Stepper Motor L52xD12 U Joint Coupler Connector with Screw for RC Model Motor, RC Robot, DIY Encoder, CNC Machine

  • [Total Size] - Outer Diameter: 12mm / 0.47".
  • Connection Diameter: 4mm to 4mm / 0.16" to 0.16".
  • [Material] - This universal coupling is made of premium iron metal material, which is durable and has a long service life, fine workmanship.
  • [Feature] - The universal joint of the purpose is to firmly connect the driving shaft and the driven shaft to rotate together and transmit motion and torque, cost effective coupling design, which is very flexible and easy for use, and is great replacement for your old or broken one.
  • [Design] - Rotatable design. Allow the angle between the two axes within a limited range vary with operational needs, and easy to set up the items on the shaft and control the holding capacity of the coupling.
  • [Wide Application] - Universal joint coupling are used in servo motor systems, 3D printer, cnc machine, diy encoder, spindle transmissions, stepping motors, lifting platforms, machine tool transmissions, stepping motors, encoders, screw drives, machine platforms or gearboxes, etc.
  • Great suitable for short support shaft, bushing model, miniature Shaft, model airplane/ boat/ car.
Check Stock

Neiko 03324A Crowfoot Wrench Set 1/2″ and 3/8” Drive, 15 Piece, Metric Crows Foot Wrench Sizes 8mm-24mm, Chrome-Moly Flare Nut Wrench Set

  • DUAL DRIVE SET: With 3/8” and 1/2” drive ratchets, extensions, or impact torque wrenches, you can utilize these flare nut wrenches where standard 6-point and 12-point sockets and wrenches simply cannot fit..
  • CROWS FOOT SHAPED: This flare nut wrench set includes 15 large sized crowfoot wrenches that resemble crows feet that are utilized in automotive repair work when reaching and holding nuts and/or boltheads in difficult spots on your car or vehicle..
  • PREMIUM GRADE Cr-Mo: Each metric crowfoot wrench is made of industrial grade, heat-treated, drop forged chrome molybdenum steel that creates an extremely tough tool and delivers a lot of turning power for those difficult angles..
  • CROWFOOT WRENCH HOLDER CASE: Each crowfoot wrench socket stores in a blow molded compartment in a high impact ABS case that allows for storage, efficiency and portability..
  • CROWFOOT SIZING: Each set includes precision crafted 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, and 19mm for 3/8-inch drive, and 21mm, 22mm, and 24mm for 1/2-inch drive for larger cars, trucks, or vehicles..
Check Stock

Frigidaire 18FFDHMH01 Dehumidifier Drain Hose 12 Foot Black

  • Drain hose continuously drains water from dehumidifier for uninterrupted use.
  • 12 foot hose length can be cut to fit your installation needs.
  • Universal 3/4" threaded garden hose style coupling allows easy installation.
  • Place washer inside coupling, screw hose coupling onto dehumidifier or collection pan, and place opposite hose end into drain.
  • Rubberized 12' drain hose is durable for peace of mind.
Check Stock

BENLIUDH 4 Pcs Universal Joint Shaft Coupling 4mm to 6mm Inner Dia U Joint Coupler with Screws for Motor

  • Material：Universal joint shaft coupling is made of nickel-coated iron，much stronger, wearproof, Long service life。.
  • Dimensions：Inner Diameter: 4mm to 6mm，Outer Diameter: 11mm/0.43”；Height: 24mm/0.94”。.
  • Package Include：4 x universal joint shaft coupling, 1x hex wrench, 8 x fastening screws。.
  • Application: The universal joint is suitable for the use of the straight shaft of the motor, and is suitable for the use of various metals such as model cars, model boats, and robots，It is suitable for various general machinery occasions。.
  • It Can be bent at any angle (rotation angle is 45 degrees), and the universal joint can change the transmission direction at any angle。.
Check Stock

Dixon Air King RAM0 Stainless Steel 316 Air Hose Fitting, 2 Lug Universal Coupling with Blank End

  • Blank end fittings have no outlet and are used to block the line at any coupling point.
  • The end opposite the coupling head is flat, with an eye for a chain to secure the fitting when not in use.
Check Stock

ZKTOOL 3/8” and 1/2” Drive Crowfoot Flare Nut Wrench Set, 19PC Metric Tool 8 to 32 mm Sizes ,Flare Nut Wrench set for 3/8in and 1/2in Drive Ratchet.

  • [FUNCTION]: Crows foot wrench set includes 19 size metric Crowfoot flare nut wrenches for 3/8" and 1/2" drive ratchet, extension or torque, 19 size claw adapter to extend the range of common wrenches, Allows you to reach awkward angles and hard-to-reach areas that a regular socket or wrench cannot..
  • [PACKAGE CONTENT]: Crowfoot wrench set includes (19) crowfoot wrenches – 3/8-inch drive 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm.
  • 1/2-inch drive 21mm, 22mm, 24mm,27mm,28mm,30mm,32mm.
  • Packed inside (1) storage case for your convenience..
  • [EXTENDED RANGE]: crowfoot adapter extends the reach of a standard wrench to inaccessible fasteners in tight spaces that you would not normally have access to. Once in place, your existing ratchet, extender or torque wrench will attach to the crowfoot drive hole to drive the fasteners. They are both 100% compatible with your existing metric 3/8” and 1/2” drive tools, so they can meet all your needs..
  • [HIGH QUALITY]: Made of industrial grade, heat treated, drop forged chrome molybdenum steel to ensure nut wrench set durability, maximum torque and longevity against rust and corrosion.
  • there are return tabs at the jaws, so You get better leverage and more grip, and they slide easily over yo....
Check Stock

Joint Coupling Metal Shaft Coupling Motor Connector - 0.5in×0.9in×2in

  • CONNECT RIGID RODS-This joint or coupling connects rigid rods whose axes are inclined to each other..
  • DURABLE-The universal joint is made of premium metal material, which is durable and has a long service life..
  • COMMON USE-The shaft joint is commonly used for shafts that transmit rotary motion..
  • BLACK-Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
  • WIDE APPLICATION-The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..
Check Stock

Universal Joint Coupling Metal Shaft Coupling Motor Connector (0.5in×0.9in×2in)

  • 【CONNECT RIGID RODS】This joint or coupling connects rigid rods whose axes are inclined to each other..
  • 【DURABLE】The universal joint is made of premium metal material, which is durable and has a long service life..
  • 【COMMON USE】The shaft joint is commonly used for shafts that transmit rotary motion..
  • 【BLACK】Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
  • 【WIDE APPLICATION】The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..
Check Stock