Reviews Ultra high Precision Boring Bars

2\ Boring Head SET 12 Pcs Carbide Boring Bars MT2 -M10 F1-12 50mm Boring Head With 9pcs 12mm Boring Bars Milling Machine Accessories

  • This tool set is made of high quality material, good wear resistance, and durable in use.
  • The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • This tool set contains boring head,Boring Bars, perfect for the milling machine.
Check Stock

HHIP 3900-5308 Bushing for A Series S Holder 40-Position Tool Post, MT2 Taper, 1-3/16\ Holder Hole Diameter

  • 1. Model : MGIVR2016-2 Right hand Internal Grooving holder / Boring bars.
  • 2. Inserts applied: MGMN200-G (Grooving inserts).Inserts with Nano coating endow them strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • 3. Shank Diameter: 5/8" inch / 16*16mm, Overall length: 180mm/7.08" , Groove width: MGMN200.
  • 5. Advantage: Suitable for hard steel and stainless steel parts processing. High hardness, good toughness, good wear resistance, heat resistance. Imported base material, high-quality coating.
  • 4. Package includes: 1Pc of MGIVR2016-2 Tool-holder +1PC MGMN200-G Colorful coating insert + Wrench : L.
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ...igh hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the bar increases the anti-vibration capability of the boring bar..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

iCarbide R8 Boring Head and 1/2 Shank Boring Bar 6pcs Set Inserts Included 1/2 - 4

  • Inserts included TBGT 06 ,TPGT 09 ,TPCT1103.
Check Stock

4 PC 1/2\ Shank Indexable Boring Bar Set Free TCMT Insert

  • Inserts included TBGT 06 ,TPGT 09 ,TPCT1103.
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Sharpie 37002 Permanent Markers, Ultra Fine Point, Red, 12 Count

  • Proudly permanent ink marks on paper, plastic, metal, and most other surfaces.
  • Intensely brilliant colors create eye-popping, vibrant impressions.
  • Remarkably resilient ink dries quickly and resists both fading and water.
  • Endlessly versatile ultra-fine point is perfect for countless uses in the classroom, office, home, and beyond.
  • Colorful options: Includes 12 Red Sharpie permanent markersDescriptionBold to the max, permanent to the core, and offering the ultimate in precision, Sharpie Ultra Fine Point Permanent Markers inspire you to make your point. Made to write practically everywhere, vivid Sharpie markers eliminate dull and boring. The original permanent marker, Sharpie has iconic ink that dries quickly and resists both water and fading. While pale imitations wither away, Sharpie markers make creations that endure. Featuring a precise, narrowed tip for extreme control, these Sharpie Ultra Fine Point Permanent Markers inspire you to tell your whole story..
Check Stock

Accusize Industrial Tools 3/8 1/2 5/8 & 3/4 inch 31 Pc Right Hand Stucr Indexable Boring Bar Set Including 20 Pc Tcmt Inserts P252-S412

  • Small hole capacity: minimum of .430''. TCMT inserts.
  • Negative 3 degree end cutting edge for 7 degree positive triangle Clearance.
  • Bar is made of heat treated, precision ground alloy steel.
  • 4pcs indexable boring bars(STUCR). 1pc each of 3/8", 1/2", 5/8" & 3/4".
  • 10pcs TiN coated TCMT 21.5 inserts. 10pcs TiN coated TCMT 32.5 inserts. 4pcs torx screws. 2pcs torx wrench. 1pc fitted case.
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

Blush Cart Cocktail Shaker Tool Jigger, Muddler Bar Spoon, and Strainer, Set of 1, Barware Set

  • ESSENTIAL BARWARE TOOL SET - This bar kit bar features four of the most important bar tools: a shaker, jigger, strainer, and spoon that doubles as a muddler in a flashy rainbow finish. Perfect for a budding bartender or seasoned mixologist..
  • PROFESSIONAL QUALITY - Crafted from stainless steel with an iridescent finish, this sleek shaker enhances your bar's elegance. Rely on this set to enjoy creating iconic cocktails like Manhattans, Negronis, and margaritas with precision and ease..
  • PERFECT GIFT - Our durable products are perfect for girl's nights in and parties. This eye-catching bar set is great as gifts for women, birthdays, bachelorette parties, or to upgrade liquor cabinets, at-home bars and more..
  • BAR CART ACCESSORIES - Sip, laugh, and love your new and improved bar with an array of sassy accessories including keychain bottle openers, spritzer shot glasses, drink tumblers, bracelet flasks and more. Blush makes barware extra special..
  • SAY BYE TO BORING BARWARE - Blush creates fun, feminine, and on-trend barware and drinking accessories for a night out or in. Let loose with high quality and stylish beverage lifestyle accessories that stand out from the crowd..
Check Stock

Ceenwes Men's Grooming Kit Professional Beard Trimmer Hair Clippers Hair Trimmer Hair Design Trimmer Mustache Trimmer Body Groomer/Nose Ear Trimmer for Facial Body Hairs

  • ...mind you to charge, cordless trimmer can enioy up to 60mins after only about 1.5 hours full charged, No longer need to worry about the power problem.press and hold the power button for 3 seconds to open the child lock, to prevent accidental touch to open the product, play a certain protective role..
  • 【Convenient 】Precision grinding cutting head Shaver/Hair trimmer/Nose trimmer/Beard trimmer/Precision trimmer. High quality cutting head High effectiveness, precision, very durable and easy to use.Slide switch for precision trimmer cutting length fine tuning 1:0.8mm/2:1.3mm/3:1.8mm.5 adjustable beard trimmer comb (3/6/9/12mm/U Sharp) for a full-size/beard trimmer or hair cutting..
  • 【Cordless & Rechargeable】Light weight and cordless design for easy use. Men's Grooming Kit is equipped with a charger and charging base.With the cordless clipper, you can no longer be bothered by the trouble of replacing batteries or boring wires.but also available for cord..
  • 【LOW VIBRATION & LOW NOISE】Grooming kit for men mute function and skin-friendly haircut kit is suitable for hair salon and home use.Trimmer for beard with Precision motor, low vibration and ultra quiet design, free it from work noise with only about 50 db..
Check Stock

JRT 5pcs 16ER AG60 External Threading Inserts + 16IR Internal CNC Lathe Indexable Carbide Insert Blade for Tool, Gold, length: 16mm ,pitch :0.5-3.0mm

  • ☞ Inserts Size: 16ER- 3/8" right hand . Partial profile: 60 degree, Pitch : 0.5--3.0mm, insert length:16mm. Suitable for machining Stainless steel and Steel parts.
  • ☞ Inserts Feature: carbide with PVD coating , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞ Boring Bar Size: Internal left hand holder, 5.9"/150mm long , 0.51"/ 13mm high, Screw size : M3.5 x 10, T15 wrench.
  • ☞ Boring Bar Feature : Strong steel as material, laser lettering on holder. Anti-rust oil wiped on holders to prevent from oxidation. Plastic box packing ,easier to store..
  • ☞ Package Includes: 1× SNL0013M16 Boring bar + 10pcs 16ER AG60 Carbide inserts + Wrench T15.
Check Stock