Reviews Ultimaker Nozzle

Ultimaker S5 3D Printer

  • Newest large-format 3D printer from Ultimaker.
  • Dual extrusion capability for multi material prints.
  • Premium materials used in construction. Heated bed smooths prints and allows for ABS printing..
  • The innovative Print Core system allows for simple swapping of hot ends.
  • Water soluble supports allow for smooth surfaces and complex geometry.
Check Stock

SainSmart 3mm TPU 3D Printing Filament, 1.0 kg, Red

  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible..
  • Compatible with printers on the market that accept 3 mm filament. Including Lutzbot, Ultimaker 3D printers. With bowden extruder needs to print slowly, excellent adhesion on heat bed, not neccessary for extra adhesion like tape..
  • With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament's tendency to not warp..
  • Resist to oil, grease and etc. Duarable performance even in chemical harsh environment..
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!.
Check Stock

3D Solutech Chocolate Brown 3D Printer PLA Filament 1.75MM Filament 2.2 LBS 1.0KG PLABRW

  • Dimensional accuracy: diameter variance of non more than 30 microns for consistent feeding and better 3D prints.
  • 3D Solutech PLA Filamet is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot, Ultimaker, Bits from Bytes,....
  • 3D Solutech engineered its professional 3D printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation....
  • 3D Solutech pla filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.
Check Stock

IC3D Natural 3mm Nylon 3D Printer Filament - 1 kg Spool - Professional Grade 3D Printing Filament - Made in USA

  • 2.1 lb of 3mm Nylon 3D printer filament | Similar to Taulman Bridge Nylon.
  • Filament diameter is 2.85mm +/-0.05mm, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1.
  • Printing Temperature range is 245 - 260C | Bed Temperature 40C - 70C.
  • Made in the USA under strict quality standards.
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A.
Check Stock

3D Solutech Marble 3D Printer PLA Filament 1.75MM Filament Dimensional Accuracy +/- 0.03 mm 2.2 LBS 1.0KG - 3DSPLA175MBL

  • Dimensional accuracy: diameter variance of non more than 30 microns for consistent feeding and better 3D prints.
  • 3D Solutech PLA Filamet is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot, Ultimaker, Bits from Bytes,....
  • 3D Solutech engineered its professional 3D printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation....
  • 3D Solutech pla filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.
Check Stock

3D Solutech 3DSPLA175BWN Chocolate 3D PRINTER PLA Filament Dimensional Accuracy +/0.03 mm 2 lb 1.0kg - 1.75 mm PLA Brown

  • Dimensional accuracy: diameter variance of non more than 30 microns for consistent feeding and better 3D prints.
  • 3D Solutech PLA Filamet is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot, Ultimaker, Bits from Bytes,....
  • 3D Solutech engineered its professional 3D printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation....
  • 3D Solutech pla filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.
Check Stock

IC3D Black 1.75mm ABS 3D Printer Filament - 1kg Spool - Dimensional Accuracy +/- 0.05mm - Professional Grade 3D Printing Filament - Made in USA

  • Filament diameter is 1.75mm +/-0.05, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1.
  • Printing temperature range is 220 - 230C.
  • Made in the USA under strict quality standards.
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A.
Check Stock

IC3D Grey 2.85mm ABS 3D Printer Filament - 2.5kg Spool - Dimensional Accuracy +/- 0.05mm - Professional Grade 3D Printing Filament - Made in USA

  • Filament diameter is 2.85mm +/-0.05, ovality (roundness) is within 4% and weight is 5lb +/- 0.1.
  • Printing temperature range is 220 - 260C.
  • Made in the USA under strict quality standards.
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A.
Check Stock

3D Solutech - PREPLAWHITE Real White 3D Printer Premium PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG)

  • Dimensional accuracy: diameter variance of non more than 30 microns for consistent feeding and better 3D prints.
  • 3D Solutech PLA Filamet is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot and many others.
  • 3D Solutech engineered its professional 3D printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results.
  • 3D Solutech pla filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.
Check Stock

GUBCUB 3D Printer Nozzles Cleaner Kit, 0.4mm Extruders Brass Nozzles, 0.4mm Stainless Steel Needles, Tweezers, Stainless Steel Wire Brush for MK Ender 3 CR-10

  • Compatible with most 3D printers, E3D, MK8 and Ultimaker, CR-10, Duplicator, RepRap, etc..
  • The nozzles adopts premium brass, better thermal conductivity and higher hardness, excellent wear resistance, smooth internal contact surface of nozzles effectively help you prevent waste of excess filament.
  • Super flexible needles support multiple times of bending and not easy to break.
  • Non magnetic coated tweezers are very suitable for repairing thin wires, screws and circuit board welding and high density integrated circuit operation.
  • Ergonomic curved handle and hanging hole of cleaning brush improves working efficiency and comfort.
Check Stock

Snapmaker PLA 3D Printer Filament 1.75mm, 1kg Spool (2.2 lbs) - Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer (White)

  • ★【Bubble-Free, Clog-Free, Tangle Free】- Less warping via using the precise winding technology in manufacturing. Its ultra smooth technology makes the filament capable of beautiful and smooth extraction, helping you to print delicate objects.
  • ★【1 kg PLA Spool, Vacuum Sealed】- Our filament is precision extruded onto 1kg reels (2.2 lbs) and vacuum-sealed with desiccant to protect it from moisture.
  • ★【Dimensional Accuracy】- Accurate diameter: 1.75mm, variations +/-0.03mm. It’s PLA which is safe for the environment because it is made from resources such as corn starch.
  • ★【Wide Compatibility】- This filament is ideal for use with practically all FDM 3D Printers, such as Ender, Prusa, Makerbot, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75mm PLA.
  • ★【Lifetime Warranty】- At Snapmaker, we want to ensure the 100% satisfaction of our customers. Lifetime support, full refund/return for the cause of any defect.
Check Stock

3D Solutech Real Grey 1.75mm Flexible 3D Printer Filament 2.2 LBS (1.0KG)

  • PRODUCES THE BEST 3D PRINTS: This 3D printing filament offers excellent dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints. You can get professional results right from your own 3D printing machines..
  • HIGHLY COMPATIBLE: We at 3D Solutech are proud to provide you with flexible PLA filament that is compatible with almost all 3D printers, including those from RepRap, MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf 3D, MakerGear, Printrbot, Bukobot, Type A Machines, and many more..
  • MEETS ALL 3D PRINTING NEEDS: At 3D Solutech, our durable printing filament is highly versatile and can meet all of your 3D printing needs and applications. It comes in a variety of 3 different colors, including white, silver, hot pink, navy blue, and more. No wonder it’s the first choice of engineers and designers!.
  • ENVIRONMENTALLY FRIENDLY: Did you know that our PLA filament is stronger than alternative PLA filaments? It consists of polylactic acid and algae harvested from areas where it harms the environment in excess amounts. Additionally, it requires less energy to print because it requires a low printing temperature..
Check Stock

YOUSU PLA Plus (PLA+) 3D Printer Filament Black PLA Filament 1.75 mm Accuracy 0.03mm 1 kg (2.2 lbs), 3D Printing Filament for 3D Printer & 3D Pen.

  • 【High toughness PLA filament 】 - Formula improved to be up to 5 times tougher while retaining all the normal PLA filament advantages: excellent adherence, no warping, beautiful finish quality, and broad compatibility..
  • 【Dimensional Tolerance +/- 0.05mm】Yousu PLA+ 3D printer filaments are produced with more precise specification. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, less stringing,.
  • 【Tangle Free & No Plugging】Yousu PLA plus filament has total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle..
  • 【High Compatibility】Compatible with Most of FDM 3D Printers, such as: Prusa, MakerBot, UltiMaker, Ender 3, Simplify3D, Flashforge, etc..
  • 【Vacuumed Sealed Packaging】Filament Net Weight: 1KG.Yousu filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at a good condition to be printed..
Check Stock