Non-Metallic Liquid Tight Push On Connector Fittings Straight 1-1/4 In Diameter 5-pack
- Designed for use with type B liquid-tight conduit in corrosive, commercial and residential applications to seal a liquidtight, raintight, or oiltight....
- Can be used on metallic or non-metallic conduit with a liquid-tight connection.
- Meets NEC and UL requirements for use in wet locations.
- UL (514B, 567 - USA) and CUL (C22.2 No. 18F - Canada) Listed and Certified.
Check StockHalex, 1 in. Electrical Metallic Tube (EMT) 2-Hole Strap , 61610B, 50 per pack
- Secures EMT conduit to wood, masonry or other similar surfaces where load bearing is required.
- Corrosion resistant for indoor or outdoor use.
Check StockLamson E943E-CAR Carlon Male Adapter
- Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
- Performance: Flammability classification 94V-2.
- Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
- Application: Suitable for indoor/outdoor usage.
Check Stock(1 1/4\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included
- Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
- Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling.
- Resists Crushing and Stretching,Outdoor Sunlight Resistant.
- Integral Rigid and Flexible PVC Construction, UL Rating 140 degrees F.
- Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Check Stock4 in. Square Extension Ring, Drawn, 1-1/2 in. Deep with Twelve 1/2 in. KO's
- With proper fitting can be used for Conduit, NMSC, Armored, Metal Clad, Flex cable.
- Acceptable for use in two hour fire rated wall.
Check Stock1 Inch 90 Degree Nonmetallic Liquid Tight Electrical Conduit Conector Fitting, 4 Pack, UL Listed
- Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
- Performance: Flammability classification 94V-2.
- Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
- Application: Suitable for indoor/outdoor usage.
Check Stock
AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)
- Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
- Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
- Max thickness for stainless steel: 1/16"..
- Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
- Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock
Snowpiercer: The Complete First Season S1 (DVD)
- 【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK，Size：3/4inch， The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
- 【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
- 【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
- Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
- 【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
- 【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Check StockElectriduct 1\ PVC Coated Liquid-Tight Galvanized Steel Flexible Metal Conduit - 10 Feet
- Inside Diameter: 0.98" | Outside Diameter: 1.19" | Length: 10 Feet | Color: Black.
- Made of Galvanized Steel Strip with Spiral design, special insulation treated and covered with refined PVC coating (Polyvinyl chloride).
- Water-proof | Corrosion Resistant | UV Resistant | Flame Retardant (Flammability: UL94-V2) | Good Bending Performance | RoHS Compliant.
- Single-buckle type structure to increase tensile strength. Not easy to break off or deform | Good flexibility and smooth inner structure to keep cables and wires running through easily.
- This conduit is ideal for static and dynamic applications requiring high mechanical protection and high flexibility.
Check StockLeviton 42777-1WA Surface Mount Backbox, Single Gang, White, Box Depth Is 1.89 Inches
- For use with conduitDescriptionThomas & Betts 583611/2-30 Single Gang Utility BoxThomas & Betts 583611/2-30 Single Gang Utility Box Features:Three 1/2" each side conduit knockoutsOne 1/2" each end conduit knockoutsTwo 1/2" bottom conduit knockoutsFactory provided raised ground screw locationSteel13.0 cubic inch capacity1-7/8" deep with conduit knockouts.
Check StockSouthwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey
- All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
- No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
- No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
- Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
- for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check StockHydroMaxx Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit (1\ Dia x 25 ft)
- Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
- Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
- Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
- These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
- No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock
Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces
- SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
- DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
- SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
- IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
- COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock
