East Lake Axle replacement for front cv axles & wheel bearings set Polaris Sportsman 335/400/500/500 HO 1995-2004
- Please verify your year, make and model in the product details before purchasing..
- OEM Replacement. Brand New Complete CV Axle Assembly. Includes boots, cotter pin, inboard clip and nut.
- 1 Year Warranty (excludes lift kits & torn boots).
- This axle has a female inboard u-joint. Please verify your axle has a female inboard u-joint before ordering for the 2004 500 Sportsman or the 2004....
Check StockOTC CA7149 Ball Joint Connected Adapter Starter Kit
- Patented connection and adapter design uses spring-loaded stainless steel ball bearings to securely attach connected cups and adapters to the C-frame and forcing screw.
- Works with most OTC ball joint kits, cups and adapters.
- Locking cups and adapters set up faster on the vehicle and leave one hand free.
- Starter kit option (CA7149) includes 7 cups and adapters to work on more than 230 vehicles models, 38% more than the competition.
- No O-Rings or removable fasteners to lose, damage or replace. For R&I of ball joints, U-joints, wheel studs and more.
Check StockOTC CA6630 Ball Joint Connected Adapter Professional Kit
- Patented connection and adapter design uses spring-loaded stainless steel ball bearings to securely attach connected cups and adapters to the C-frame and forcing screw.
- Works with most OTC ball joint kits, cups and adapters.
- Locking cups and adapters set up faster on the vehicle and leave one hand free.
- Professional Kit option (CA6630) includes 25 cups and adapters to work on more than 600 vehicle models, 76% more vehicle models than the competition.
- No O-Rings or removable fasteners to lose, damage or replace. For R&I of ball joints, U-joints, wheel studs and more.
Check StockOEMTOOLS 24548 Intermediate U Joint Puller Disassembles Drivelines Removes Seized U-Joint Cups on Intermediate Trucks Buses and Farm Equipment
- REMOVE ON VARIETY OF MODELS: This Heavy Duty U Joint Puller features a universal fit that easily removes seized U-joint cups on intermediate trucks,....
- GENTLE ON VEHICLES: This U Joint Press handles the toughest jobs while preventing damage on the driveshaft, yokes, joints, and bearing cups, reducing....
- EASY AND SAFE TO USE: Use this U Joint Tool to safely disassemble drivelines without hammering or heating components.
- DURABLE BUILD QUALITY: Built to hold up through heavy duty use.
- Remove a seized back or front driveshaft U-joint, and keep on going.
- TRUSTED BY PROFESSIONALS: OEMTOOLS products are trusted by mechanics all over the world to get the job done fast.
Check StockOEMTOOLS 24538 Heavy Duty Automotive U Joint Puller U Joint Tool Works On Most Class 7 and Class 8 Trucks Easy-to-Use U Joint Puller Green
- REMOVE ON VARIETY OF MODELS: Don’t rely on dangerous and damaging methods like hammers, sockets, and vises to remove U joints.
- GENTLE ON VEHICLES: Prevent damage on the driveshaft, yokes, joints, and bearing cups by utilizing our U joint press.
- EASY AND SAFE TO USE: No hassle and safe to use.
- Our heavy duty universal joint puller can be used with a 1" drive impact wrench or smaller.
- DURABLE BUILD QUALITY: Built to hold up against multiple heavy duty uses.
- Easily torque the U joint removal tool kit by hand to remove a seized back....
- A PROFESSIONAL’S U JOINT PULLER KIT: Working on a budget doesn’t mean you have to sacrifice quality.
- Professional mechanics will find that our....
Check Stock
TEKTON 1/4, 3/8 Inch Drive Universal Joint Socket Set, 33-Piece (1/4-3/4 in, 6-19 mm) | SHD99301
- Includes 7-pc. 1/4 in. drive 6-point inch u-joint sockets: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
- 9-pc. 1/4 in. drive 6-point metric u-joint sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
- 7-pc. 3/8 in. drive 6-point inch u-joint sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
- 10-pc. 3/8 in. drive 6-point metric u-joint sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
- Combines a shallow 6-point socket and compact universal joint.
- Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
- Extra-large die-stamped size markings are easy to read and can’t wear off.
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
- Four detent grooves provide a secure connection with the drive tool.
- Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
- Sockets come organized in a sturdy case that features strong latches and clear, molded markings for each tool.
Check Stock3'' Custom Exhaust Kit Universal Mild Steel 16PCS Tubing Mandrel Bend Pipe Straight & U-Bend (2 PACKAGES SHIPPING))
- Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
- Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
- Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
- Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
- DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check StockNEW SOUTHWEST SPEED STEEL DRIVESHAFT WITH SLIP SPLINE YOKE AND U-JOINTS FOR RACING, STREET RODS, HOT RODS, AVAILABLE FROM 27" TO 69"
- Precision balanced, lightweight steel shafts are in stock & ready to ship.
- Your choice of any length from 27" to 69" long, in 1/2" increments.
- These lengths are measured center of u-joint cup to center of u-joint cup (2nd picture above), but we also have a way to measure them without having a current shaft..
- Includes new 27 spline yoke and 1310 series u-joints. Other yokes & conversion u-joints are available. Just ask before ordering for the price difference..
- These driveshafts have been used for years by some of the best race car & street rod builders in the country.
Check Stock
Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb
- SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
- PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
- HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
- MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
- MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..
Check StockOEMTOOLS 37089 Ball Joint and U Joint Press Set Forged Steel U Joint Removal Tool Ball Joint Separator Rust-Resistant Coated Ball Joint Removal Tool
- RELIABLE BALL JOINT PRESS KIT: Don’t let removing and installing ball joints be complicated.
- Remove ball joints quickly and easily with our ball....
- VERSTAILE BALL JOINT PRESS: Maintain the health of your suspension system.
- Our ball joint tool kit works on U joints, brake anchor pins, and more.
- DURABLE DIY TOOL: Get a ball joint puller kit that pays for itself.
- Easy to use, our ball joints press kit is excellent for saving on the expense of....
- PRACTICAL JOINT PRESS: Remove and install ball and U joints with ball joint puller set's selection of adapters.
- EFFECTIVE PRESS KIT: Don’t rely on makeshift methods and lesser C-clamps to do a heavy duty job.
- Our ball joints kit system is the best way to....
Check StockDNA MOTORING ZTL-30RAW 16 Pcs 3 Inches Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & U Bend Tube Kit,Universal Fit
- Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
- Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
- Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
- Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
- DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check StockDNA MOTORING ZTL-25SS-8P 8 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit
- Easy To Use: Slip Fit Joints to Provide Easiest Fabricatio.
- Universal Kit: 2pcs 48" Straight Pipes, 2pcs 90 Degree Pipes, 2pcs 45 Degree Pipes, 2pcs 180 Degree U-Bends.
- Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
- DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check StockDNA Motoring ZTL-25SS 16 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit
- Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
- Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
- Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
- i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
- DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock
