Reviews U head Screw Jack

Mautyke Electric Car Jack Kit 2 Ton Auto Scissor Jack Lift Portable Air Floor Jack Tire Jack Vehicle Repair Tool Quick Car Lift with Carrying Case

  • ...d place it in the direction parallel to the car.②Keep away when the jack is working.③Do not exceed the max. load capacity. Using GuideStep 1: Get power from the car, connect the cable (make sure the positive and negative poles are correctly matched, otherwise there will be button failure, abnormal noise or screw bending). Step 2: Choose the right jack head. Step 3: Press the (^) button to lift the car and the (v) button to lower it..
  • Best Choice for Tire Change: This electric car jack is made of cold-rolled steel which has excellent bearing capacity, it has also been updated with an extra-wide base and reinforced solid screw rods to avoid being cracked or twisted. This electric floor jack also features a bright built-in LED light, which makes changing tires much easy in the dark. 2 heads fit both sedans and SUVs of different chassis heights, vehicles under 2 tons can be lifted easily..
  • Safety Guarantee: When the car jack reaches the maximum height, it will stop working automatically. The protruding particles on the top of the jack head can increase the friction. The self-locking structure of the jack can prevent the car from falling suddenly and ensur....
Check Stock

ROGTZ Electric Car Jack kit 5 Ton 12V Car Jack Hydraulic Jack with Impact Wrench and Tire Inflator Pump, Car Lift Floor Jack for SUV Sedans Tire Change with LED Light (Black)

  • ...max height(lifting height range:6.1~17.7 inch) .The inflator pump in storage box takes 2 min for inflating(35L/Min) the replaced tire.Build-in warning flash light and LED light enables operation at night,no need to buy additional lighting tools..
  • √Usage electric impact wrench NOTES: One:2 sleeves are available for screws of 4 sizes, pay attention to the sizes when selecting the sleeve.
  • Two: The left side of the power switch marked "II", means loosening the screw. Press "II" and keep holding until the screw has been loosened, remove the nuts.The right side mark "I", means tightening the screw.Same way, keep the "I" side pressed until the screw has been tightened.
  • √SAFE AND SECURE TO USE:Our electric hydraulic jackis will automatically stop working after reaching the height limit.The jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use..
  • √MATCH MOST VEHICLES:The electric jack kit 's two-way power supply (battery clip with 12V DC power socket or car cigarette lighter) allows any adult to change and repair tires at any time on the garage/highway,best choice for your car, truck or SUV.....
Check Stock

Poyiccot 3.5mm Speaker Wire Adapter, 3.5mm (1/8") 4 Pole Stereo TRRS Male Jack to AV 4 Screw Terminal Block Balun Connectors Cable 30cm (3.5mm M/ 4pin)

  • Speaker Wire to 3.5mm Cable with Connectors 1: 3.5mm 1/8" TRRS (4-Pole) Male jack, Connectors 2: AV 4-Pin Screw Terminal Block jack,please note: Did not when when attached to wifi projector.
  • 3.5mm screw terminal cable,connecting single wires with open cable heads to your 3.5mm jack..
  • 3.5mm 1/8'' trrs cable, it has four total conductors - three signal and a ground as opposed to a more common stereo jack's two..
  • No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. Wiring diagram: PIN 1 - red wire.
  • PIN 4 - black wire. OMTP standard: PIN1 - Left channel.
  • PIN 4 - Ground. CTIA standard: PIN1 - Left channel.
  • 3.5mm trrs plug cable is more convenient to use more quickly without welding, and you can use the 22-18 gauge to connect..
Check Stock

Akron Products C-3 Adjustable Floor Jack

  • MINI SCREW JACK:Although the Mini Screw Jack is small in size, it is big in strength and durability..
  • EASY TO USE: To make adjustments to the height of the Mini Screw Jack, Just use a pipe wrench to turn the screw to the required height, and then tighten the positioning nut..
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely versatile and useful in small spaces.This product includes a safety lock set screw to ensure security..
  • VARIETY OF USES:Temporarily secure a weak floor or screw jacks home leveling post floor jack..
  • STURDY & DURABLE:Support Jack made of heavy duty steel, more durable and sturdy..
Check Stock

YEUQWJ Mini Screw Jack,Adjustable Support Jack for The Floor,Post Floor Joist JacksTelescoping Jack for Temporary Support, 10\ to 13\

  • MINI SCREW JACK: The Ellis Mini Screw Jack is Ellis' shortest adjustable support jack. Although the Mini Screw Jack is small in size, it is big in strength and durability. Combine this product with the Ellis Mini Jack Turning Bar to maximize leverage and capability..
  • EASY TO USE: To make adjustments to the height of the Mini Screw Jack, simply turn the turning wheel until you reach your desired height. A 3/4" round rod can be used for extra leverage if necessary. The top plate of the Mini Jack will swivel independently from the wheel..
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely versatile and useful in small spaces. The Mini Screw Jack has a safe load capacity of 15,000 lbs and a lifting capacity of 3,000 lbs. This product includes a safety lock set screw to ensure security..
  • SPECIFICATIONS: Range of Adjustment: 2.5.
Check Stock

OTC 1590 10-Ton Air Lift Heavy Duty Portable Jack

  • MINI SCREW JACK:Although the Mini Screw Jack is small in size, it is big in strength and durability..
  • EASY TO USE: To make adjustments to the height of the Mini Screw Jack, Just use a pipe wrench to turn the screw to the required height, and then tighten the positioning nut..
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely versatile and useful in small spaces.This product includes a safety lock set screw to ensure security..
  • VARIETY OF USES:Temporarily secure a weak floor or screw jacks home leveling post floor jack..
  • STURDY & DURABLE:Support Jack made of heavy duty steel, more durable and sturdy..
  • If you have any problem during use, please send me an email, we will reply and give you a satisfactory solution..
Check Stock

MOTOOS 22 Ton Air Hydraulic Floor Jack HD Truck Lift Jacks Service Repair Lifting Tool

  • MINI SCREW JACK:Although the Mini Screw Jack is small in size, it is big in strength and durability..
  • EASY TO USE: To make adjustments to the height of the Mini Screw Jack, Just use a pipe wrench to turn the screw to the required height, and then tighten the positioning nut..
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely versatile and useful in small spaces.This product includes a safety lock set screw to ensure security..
  • VARIETY OF USES:Temporarily secure a weak floor or screw jacks home leveling post floor jack..
  • STURDY & DURABLE:Support Jack made of heavy duty steel, more durable and sturdy..
Check Stock

YEUQWJ Adjustable Support Jack for The Floor,Post Floor Joist Jacks,RV Step Stabilizer,Mini Screw Jack-- Post 3.5\ to 6\ (8 Pack)

  • EASY TO USE: To make adjustments to the height of the Mini Screw Jack, Just use a pipe wrench to turn the screw to the required height, and then tighten the positioning nut..
  • MINI SCREW JACK:Although the Mini Screw Jack is small in size, it is big in strength and durability..
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely versatile and useful in small spaces.This product includes a safety lock set screw to ensure security..
  • VARIETY OF USES:Temporarily secure a weak floor or screw jacks home leveling post floor jack..
  • STURDY & DURABLE:Support Jack made of heavy duty steel, more durable and sturdy..
Check Stock

ZHENXIN Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Telescoping Jack for Temporary Support,Mini Screw Jack-- Post 1'1.5'' to 1'4.5''(2PACKS)

  • MINI SCREW JACK:Although the Mini Screw Jack is small in size, it is big in strength and durability..
  • EASY TO USE: To make adjustments to the height of the Mini Screw Jack, Just use a pipe wrench to turn the screw to the required height, and then tighten the positioning nut..
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely versatile and useful in small spaces.This product includes a safety lock set screw to ensure security..
  • VARIETY OF USES:Temporarily secure a weak floor or screw jacks home leveling post floor jack..
  • STURDY & DURABLE:Support Jack made of heavy duty steel, more durable and sturdy..
Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 6 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/4"..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 6 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [PARAMETER] - Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-....
Check Stock

Knob for Bottle Jack Valve Release Screw On Harbor Freight Hydraulic Press Made of 6061 Aluminum (3/8\)

  • hydraulic jack valve release screw knob comes in two sizes to either the jack screw with a 3/8" and 7/18" diameter valve release screw.
  • It is machined from a solid bar of 6061 aircraft quality aluminum, The knob also has a longer knurled section ,for extra grip..
  • It slides on over the release screw, turns 1/4 turn then secured in place with a set screw (included) from the end of the knob. You will need to use a 5/32 hex key (Allen wrench).
  • This particular part is designed for the Harbor Freight Hydraulic Bottle Jack used in the 6, 12 & 20 ton arbor presses but will work on any bottle jack with a 3/8 and 7/18" diameter valve release screw having a.
  • DO NOT USE WHEN LIFTING VEHICLES: ONLY TO BE USED ON HYDRAULIC PRESS APPLICATIONS!.
Check Stock

46mm Low Profile Tripod Head with 3 Screw Adapter 3/8 to 1/4 Professional Aluminium 360 Rotating Panoramic Ball Head Max Loading 44lbs/20kg

  • ... and Hollowed out quick release plate clip, 0.1 mm machining tolerance, anodic anodized, ultra high strength aviation aluminum alloy. It’s solid, stable and high quality.
  • 【WIDE COMPATIBILITY】: The ball head can be used with tripod, monopod,camera slider,for installing camera, DV, mobile phone, telescope. 1/4 " screw quick shoe plate screw and a 3/8 " thread tripod mount screw. Quick release plate compatible with Acra RRs, etc.
  • 【Packing & After-sale】: 1*Low profile Tripod + 3*Screw Adapter 3/8" to 1/4", ☎️we promise 12 months After sales service from the date of purchase. If you have any problems within the quality guarantee period, we will refund or resend. we are always ready to hear your voice (reply within 24hrs).
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
  • Install the base plate on a stable concrete slab under the area you wish to support.
  • Use the mounting holes on top and bottom plates to bolt jack to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock