Reviews U bolt Anchor Plate

3M DBI-SALA 2103670 U-Bolt Roof Anchor (Permanent), Fits Up To 2X8, Silver

  • Makes attaching to the anchorage structure simple, fast and easy for added worker satisfaction and productivity.
  • Specialized fall protection system for residential or commercial wood frame structures keeps you safe and secure.
  • Everything required to install is included, simply place U-bolt over roof truss and install and tighten the bolts and clamp.
  • Provides a tie-off point for the contractor during construction, and also the homeowner for future maintenance of the roof.
  • Permanent U-bolt roof anchor with integral D-ring, flashing and cap, fits up to 2x8 roof member.
Check Stock

AUTOBOTS 1/2" D Rings for Trailers Heavy Duty Trailer Tie Down Rings,Max 12,000 Lbs,Includes All Mounting Hardware, Forged Steel Bolt-on D Ring,Large Trailer Tie Down Anchor Points 2 Pack Black

  • ...r Trailers】: 1/2 Inch d-rings Welded on 1/4" Thick Steel Plate, Plate Size 6.3"x4.3", and Another Back Plate of the Same Size, 4 10.9 Grade Bolts and 4 Anti-loosening Nuts for Mounting, 2pack.
  • 【Includes All Mounting Hardware】：Autobots D Ring Tie Down Anchor Points Provided with 2 Sets of D-Ring Welded to the Backing Plate, and 2 Backing Plates of the Same Size, 8 Bolts Grade 10.9, 8 Nuts Grade 10.9, Drill to Install in Minutes.
  • 【Top Quality Material】：Trailer Tie Downs is Made with Heavy Duty Drop Forged Steel, Galvanized and Power Coated, Solid and Strong, our d ring tie downs Also Prevents Rust and Corrosion. Its Break Strength Reaches Up to 12000lbs.
  • 【Widely Used】：Bolt D Ring Anchor Are the Most Convenient and Flexible Tie-down Device Available. Often Used As Mooring Anchors on Trucks, Trailers, Pickups, Campers, Vans, Docks, Boats, Excavators, Flatbeds , Garages, Warehouses and Workshops.
  • 【More Professional and Reliable】- Compared to Ordinary Trailer Tie Down Rings, Our Trailer D Rings Have Larger Loads, Easier Installation, and More Suitab....
Check Stock

Hefty Haul Trailer Hitch Tightener for 1.25" and 2" Hitch Anti Rattle, Heavy Duty Steel, Anti Rattle Hitch Tightener 2 Inch, Trailer Hitch Accessories, Hitch Clamp, Tow Hitch Stabilizer, 1 Pack

  • Compatibility: anti rattle hitch tightener works with Classes III, and IV Hitch Receivers (1.25" and 2"), hitch stabilizer 2 inch. This hitch clamp will keep your trailer hitch from shaking and rattling when you drive down the road..
  • Durable and Heavy-Duty: The rubber coated U-Bolt and .31" thick black powder coated plate with anti-rattling stabilizer enables this to withstand all weather conditions and loads..
  • Perfect Fit: Adjustable fit and high quality materials ensure a quiet and stable towing/hauling experience. Perfect for hitch receivers, hitch racks, hitch anti rattle, anti rattle hitch pin and more..
  • Convenient and Easy Installation: Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place with the included hardware. Trailer hitch accessories..
  • What's Included: Trailer hitch stabilizer with rubber coated U-bolt, tightener plate, 2 lock washers, 2 flat washers, and two nuts with complete instruction..
Check Stock

1SHOT Steel Stud Anchor 250 Pack

  • Thread Dia.: M12, Pitch:1.75mm, Total Length: 250mm / 9.84"..
  • Material: 304 Stainless steel, anti-rust, anti-corrosion, durable to use..
  • Advantage: Designed for assembly fastening, screw into threaded nuts or tapped holes..
  • Application: Suitable for anchor bolts, clamps, hangers and U-bolts and many more projects..
  • Package: Includes 2 pack M12 x 250mm Fully Threaded Rod. Any questions feel free to contact us..
Check Stock

Anti Rattle Hitch Tightener Stabilizer No Sway for 2' and 1.25' Steel Heavy Duty Rust Free

  • [Compatibility] Hitch tightener can be used with 2" and 1.25" tow hitch receivers，including Curt, Rola, Yakima, Inno, Draw-Tite, Blue Ox, Hidden Hitch, Thule, Tulga, U-Haul and other brands. It is compatible with all hitch classes includes I, II, III, and IV (1, 2, 3 and 4), both 2” and 1.25” models, ideal for hitches on SUV’s, vans, trucks, RV’s, sedans and trailers..
  • [Material] Includes a heavy-duty U-bolt and thick powder coated plate that will last to all weather conditions and loads..
  • [Easy Installation] Convenient and easy to install! Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place. In just 3 easy steps and in less than 10 minutes..
  • [Safety] prevents from rattling, wobbling, rocking and hitch movement for cargo carriers, hitch racks, bike racks and trailer ball mount. Leading design of Tulga hitch tightener is the best anti rattle hitch tightener in the market..
  • [Warranty] Our heavy duty built hitch tightener is backed with 30 days money back guarantee and LIFETIME WARRANTY.
Check Stock

Lee Women's Regular Fit Straight Leg Jean, Anchor, 14 Petite

  • Extremely rugged and corrosion resistant.
  • Bolt or weld to structure for fall arrest anchor point.
  • Compact 1/4" x 2" x 4-1/2" (6 x 51 x 114 mm) 304 stainless steel plate.
  • D-ring anchorage plate with zinc plated steel D-ring and 304 stainless steel plate.
Check Stock

HYS VHF Marine Antenna Low-Profile 156-163Mhz Antennas W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259

  • Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power.
  • W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259.
  • VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting..
  • Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting..
  • The antenna does not come with mast pole mount.
  • it comes with TWO U-bolt which can be used with the attached plate for pole mounting..
  • Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use..
  • HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range..
Check Stock

HiTow Trailer Hitch Tightener Anti-Rattle Stabilizer for 2' & 1.25' Hitch, Rubber-Coated No Rattle Noise, Corrosion Resistant

  • Compatible with all 1-1/4 inch and 2 inch Hitch, Rubber Coated.
  • Stops rocking, wobbling, banging, clanking and jerking caused by sloppy，take all the slop out, no rattle or fish tail, will providing a smooth and quiet towing experience.
  • Includes a heavy-duty U-bolt and thick powder coated plate that will stand up to all weather conditions and loads.
  • Easy installation by sliding the U-bolt over the stinger, sliding the tightener plate into the bolt, and tightening it in place with the included hardware, can be mounted from the bottom if hitch ground clearance is low.
  • Perfect for a variety hitch of SUV’s, vans, trucks, RV’s, sedans and trailers.
Check Stock

Disco Automotive 8681 Grey Replacement Hex Head Body Bolt Assortment

  • High quality: The bumper clip is made of high-quality nylon material, which is sturdy and durable, resistant to wear and corrosion, and the rivet clip is not easy to break or break. It is a new type of automobile bumper splash plate bolt hardware kit..
  • Reasonable design: The motive splash plate body bolt kit is small in size, light in weight and easy to carry. You can replace them anytime and anywhere. The rivet clip can replace and fix the bumper very well..
  • Versatility: Bumper clip bolts are widely used in car door decoration, bumpers, splash plate retainers, bell mouths, radiator guards, engine cover fenders, etc., and can also be used in furniture and electronic equipment applications..
  • Multi-scene use: This new engine splash plate bolt hardware kit is suitable for Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details)..
  • High-quality packaging and after-sales service: 15 built-in fender washer bolts and screws, 15 extruded U-shaped nuts, 20 bumper clips.
  • we support 180-day worry-free return and exchange, if you have any questions, please contact us directly, we Will reply you within 24 hours within working days..
Check Stock

Hardware Essentials 320898 Square U-Bolt-3/8X3Lx4W, Zinc

  • Square U-bolts are great for attachment to square shaped posts.
  • U bolt measurements are as follows – diameter (3’8”), thread count (16), inside length (3”), inside width (4”).
Check Stock

Permatex 80074 Belt Dressing Cond 5oz.

  • Permatex Belt Dressing and Conditioner extends belt life and penetrates the cord fibers of “V” belts to restore pliability and flexibility..
  • Belt Dressing and Conditioner prevents belt slippage due to heat, cold, dampness, dust, and glazing. Eliminates squeaking and slipping..
  • Suggested Applications: for easy removal of spark plugs, cylinder head and exhaust head bolts.
  • apply to anchor pins on brake assemblies, U-bolts and....
  • Directions: Shake well. Attach extension tube. While engine is running, spray lightly on inner working surface of belt near smallest or uppermost....
Check Stock

Universal Roof Box U-Bolt Clamps Cargo Carrier Roof Rack Bracket Kit Van Mounting Fitting Kit 85mm Internal Width 40mm Thick Luggage Rack Adjustable U Bolt Quick Release Latch for Roof Box Hardware

  • UNIVERSAL FIT - Universal roof box u-bolt clamps fit for car crossbars within 80mm, can accommodate luggage racks up to 40mm/1.57 inches thick, widely used in hatchbacks, sedans, SUVs, off-road vehicles, etc. NOTICE: Not fit for THULE Roof Box.
  • SIZE: Inner width 83mm/3.27 inches, outer width 90mm/3.54 inches, screw diameter 7mm/0.27 inches, 40mm/1.57 inches thick.
  • NOT EASILY DEFORMED - Roof rack mount u-bolt clamps has a rubber gasket and a plastic back plate, which can protect your car from scratches to the greatest extent, and can increase friction, which has a high hardness, good confinement effect, strong bearing capacity.
  • GALVANIZED STEEL MATERIAL - Universal roof box u-bolt clamps using galvanized steel material, durable, alkali resistance, and has a clear thread, uniform force and not easy to slip to improve overall stability.
  • PACKAGE INCLUDED - Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2pcs strap.
Check Stock

Rural365 Farm Gate Anchor Cane Bolt 18in - Farming Livestock Spring-Loaded Fence Gate Drop Rod Cattle Gate for Tube Gate

  • [Keep Your Cattle Secure]: The Rural365 Livestock Gate Anchor is designed to prevent your livestock from escaping as well as support your round tube....
  • [Built to Last]: Fence gate anchor rod holder constructed of stainless steel.
  • Gate drop rod will stand firm in rain, sleet, and snow to hold your gate....
  • [Easy to Install]: To install tube gate stop, place U-shaped attachments along the bottom of your gate, then screw on red base.
  • [Easy to Use]: Drop pin rod features wedged tip to break into the ground.
  • Lift curved handle to raise drop pin so you can move your gate.
  • [Package Contents]: Cane bolt tube gate stop package includes 2 U-shaped attachments, 1 red base, 1 attached spring, 2 screws.
Check Stock