Reviews U Joint Assembly

Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 7/8’’ x 7/8’’ ID, 3/16’’ Keyway, 1000 RPM, 5” Overall Length, 2.5 lb, 133015

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 7/8’’ x 7/8’’ inner diameter, 3/16’’ keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.5 lb..
  • HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations..
  • TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use..
  • FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications..
  • MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile..
Check Stock

OEMTOOLS 24548 Intermediate U Joint Puller Disassembles Drivelines Removes Seized U-Joint Cups on Intermediate Trucks Buses and Farm Equipment

  • REMOVE ON VARIETY OF MODELS: This Heavy Duty U Joint Puller features a universal fit that easily removes seized U-joint cups on intermediate trucks,....
  • GENTLE ON VEHICLES: This U Joint Press handles the toughest jobs while preventing damage on the driveshaft, yokes, joints, and bearing cups, reducing....
  • EASY AND SAFE TO USE: Use this U Joint Tool to safely disassemble drivelines without hammering or heating components.
  • DURABLE BUILD QUALITY: Built to hold up through heavy duty use.
  • Remove a seized back or front driveshaft U-joint, and keep on going.
  • TRUSTED BY PROFESSIONALS: OEMTOOLS products are trusted by mechanics all over the world to get the job done fast.
Check Stock

TEKTON 1/4, 3/8 Inch Drive Universal Joint Socket Set, 33-Piece (1/4-3/4 in, 6-19 mm) | SHD99301

  • Includes 7-pc. 1/4 in. drive 6-point inch u-joint sockets: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
  • 9-pc. 1/4 in. drive 6-point metric u-joint sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
  • 7-pc. 3/8 in. drive 6-point inch u-joint sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
  • 10-pc. 3/8 in. drive 6-point metric u-joint sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
  • Combines a shallow 6-point socket and compact universal joint.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Sockets come organized in a sturdy case that features strong latches and clear, molded markings for each tool.
Check Stock

OMT Inner CV Axle Puller Tool Set with 5/8"-18 Slide Hammer & Adapter | Inner CV Joint Removal Tool Kit | Front Wheel Drive Axle Puller Set Compatible with Taurus Sable FWDs from 1986 to 2021

  • ... models from 1986 to present, loosening and removing their front wheel drive axles and hidden retaining rings in minutes.
  • MULTIPURPOSE SLIDE HAMMER: Our slide hammer weighs 7 pounds for extra strength to give you a straight and even pull for damage-free removal of the axle assembly.
  • its threading also lets you use it with other 5/8"-18 adapters to deal with other makes and models or to handle other work around your engine.
  • DURABLE PULLER ADAPTER: The U-shaped CV joint fork has a 2-inch opening and 2.4-inch depth to firmly lock onto your Sable or Taurus axle assembly, making removal of stuck CV joints a cinch.
  • QUICK & EASY OPERATION: These automotive tools work together to provide straight and even force so your constant velocity axle pops out smoothly, leaving the roller bearing inside the joint and the rest of your vehicle untouched.
  • BUILT TO LAST: Made of premium AISI 1045 medium carbon steel, our CV joint removal set provides strong and dependable service for the long haul.
  • heat treated and blackened or chrome plated, each part offers superior durability and corrosion r....
Check Stock

Omega Lift 26030 3 Tons Hydraulic Aluminum Jack, 14.96\ Height, 6.9\ Width, 29.93\ Length

  • All aluminum structure provides strength and stability.
  • Side frame handles allow for easy carrying.
  • Extra wide wheels designed for stability under load stress.
  • U-Joint assembly for precise load control.
Check Stock

Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
  • PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
  • HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
  • MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
  • MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..
Check Stock

OEMTOOLS 24538 Heavy Duty Automotive U Joint Puller U Joint Tool Works On Most Class 7 and Class 8 Trucks Easy-to-Use U Joint Puller Green

  • REMOVE ON VARIETY OF MODELS: Don’t rely on dangerous and damaging methods like hammers, sockets, and vises to remove U joints.
  • GENTLE ON VEHICLES: Prevent damage on the driveshaft, yokes, joints, and bearing cups by utilizing our U joint press.
  • EASY AND SAFE TO USE: No hassle and safe to use.
  • Our heavy duty universal joint puller can be used with a 1" drive impact wrench or smaller.
  • DURABLE BUILD QUALITY: Built to hold up against multiple heavy duty uses.
  • Easily torque the U joint removal tool kit by hand to remove a seized back....
  • A PROFESSIONAL’S U JOINT PULLER KIT: Working on a budget doesn’t mean you have to sacrifice quality.
  • Professional mechanics will find that our....
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
  • Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
  • [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
  • Ball joint compressor control arm bushing press kit may even fit your tractor.
  • [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock

OEMTOOLS 37089 Ball Joint and U Joint Press Set Forged Steel U Joint Removal Tool Ball Joint Separator Rust-Resistant Coated Ball Joint Removal Tool

  • RELIABLE BALL JOINT PRESS KIT: Don’t let removing and installing ball joints be complicated.
  • Remove ball joints quickly and easily with our ball....
  • VERSTAILE BALL JOINT PRESS: Maintain the health of your suspension system.
  • Our ball joint tool kit works on U joints, brake anchor pins, and more.
  • DURABLE DIY TOOL: Get a ball joint puller kit that pays for itself.
  • Easy to use, our ball joints press kit is excellent for saving on the expense of....
  • PRACTICAL JOINT PRESS: Remove and install ball and U joints with ball joint puller set's selection of adapters.
  • EFFECTIVE PRESS KIT: Don’t rely on makeshift methods and lesser C-clamps to do a heavy duty job.
  • Our ball joints kit system is the best way to....
Check Stock

Dorman 425-183 Steering Shaft Compatible with Select Models

  • 【High Quality】The Intermediate Steering Shaft is exact OE manufactured and can be replaced directly with the original parts in your vehicle. It is....
  • 【Universal Joint 】Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent....
  • 【Compatibility】This Steering Shaft fits for Cadillac Escalade ESV EXT.
  • 19153614, 425-176 . This Steering Column Intermediate Shaft will meet or exceed OEM....
  • 【Warranty】100% satisfaction guarantee, 1 year UNLIMITED REPLACEMENT PROMISE, If you have any issues with the Intermediate Steering Shaft Assembly,....
Check Stock

For 10-22 Ford F250 17 Inch Silver Steel Rim - OE Direct Replacement - Road Ready Truck Wheel

  • Replacement for 1999-2004 Ford F-250 / Ford F-350 Super Duty (4x4.
  • Both (2) Brand New Front Driver & Passenger Side Axle w/U-Joint for 1999-2004 F-250/F-350 35 Spline Dana 60 Axle.
  • Both (2) Front Wheel Bearing And Hub Assembly Set "Coarse Threads" - 515020.
  • FITS DANA 60 4x4 Single Rear Wheel Models Only - Coarse Hub Threads and ABS.
Check Stock

Hoover WindTunnel Front Wheel Assembly Part 43248064

  • Wheel Assembly fits on bottom of vacuum and is used to for height adjustment.
  • Replacement Hoover wheel assembly fits Hoover vacuum cleaner models C1701-900, C1703-900, C1703-920, C1705-900, C1712-900, U5402-900, U5403-900, U5403-950, U5409-900, U5409-955, U5409-990, U5415-900, U5416-900, U5420-900, U5421-9RM, U5423-900, U5432-900, U5433-900, U5433-906, U5434-900, U5435-900, U5435-906, U5435-940, U5436-950, U5437-960, U5438-900, U5438-960, U5439-900, U5443-900, U5443-940, U5443-960, U5445-900, U5445-940, U5445-950, U5446-900, U5446-960, U5446-980, U5446-990, U5447-900, U5449-940, U5449-950, U5450-900, U5451-900, U5452-900, U5453-900, U5453-916, U5454-900, U5456-900, U5457-900, U5458-900, U5458-910, U5459-900, U5460-900, U5461-900, U5462-900, U5463-960, U5464-900, U5465-900, U5465-960, U5465-970, U5465-990, U5469-900, U5469-910, U5475-900, U5475-960, U5477-900, U5700-9RM, U5720-900, U5720-990, U5721-900, U5722-900, U5723-900, U5725-900, U5750-900, U5750-906, U5750-911, U5750-980, U5751-900, U5752-900, U5755-900, U5756-900, U5757-900, U5758-900, U5759-900, U5761-900, U5762-900, U5763-900, U5765-900, U5767-900, U5769-900.
Check Stock

TEKTON 3/8 Inch Drive Universal Joint Socket Set, 17-Piece (3/8-3/4 in., 10-19 mm) | SHD91301

  • Includes 7-pc. 3/8 in. drive 6-point inch u-joint sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
  • 10-pc. 3/8 in. drive 6-point metric u-joint sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
  • Combines a shallow 6-point socket and compact universal joint fits into extremely limited spaces when other tools can't fit..
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
Check Stock