Reviews Type 17 Screw

TuningPros WSC3-721B17 4pcs Set Snap-On Type (Pop-On) 17-Inches Matte Black Hubcaps Wheel Cover

  • Fit on snap on type or pop on type 17-Inches steel wheel only. NOT fit on size other than 17-Inches. NOT fit on bolt-on type steel wheel. Not fit on screw-on type steel wheel too..
  • Make with high quality ABS plastic for long lasting durability.
  • Adjustable retention ring to assure maximum grip to wheel.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Retention ring must be installed to secure the wheel cover on steel wheel.
  • No special tools required (Not recommended using hammer or screw driver for installation).
  • Sold as a complete set of 4 x 17-Inches Hubcaps - Matte black finish.
Check Stock

Tuningpros WC3-17-9054-S - Pack of 4 Hubcaps - 17-Inches Style Snap-On (Pop-On) Type Metallic Silver Wheel Covers Hub-caps

  • Fit on snap on type or pop on type 17-Inches steel wheel only. NOT fit on size other than 17-Inches. NOT fit on bolt-on type steel wheel. Not fit on screw-on type steel wheel too..
  • Make with high quality ABS plastic for long lasting durability.
  • Adjustable retention ring to assure maximum grip to wheel.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Retention ring must be installed to secure the wheel cover on steel wheel.
  • No special tools required (Not recommended using hammer or screw driver for installation).
  • Sold as a complete set of 4 x 17-Inches Hubcaps.
Check Stock

The Hillman Group 42180 Pro Crafter 8 by 2-1/2-Inch Wood Screw, 50-Piece, Yellow Zinc

  • Flat head with countersinking nibs allows the screw to drive clean and flush to the surface.
  • Square drive for a confident stick fit while driving.
  • Secondary serrations reduces drive torque for easy installations.
  • Type 17 cut point helps prvent wood splitting and allows for quick penetration.
Check Stock

Tuningpros WC3-17-721-B - Pack of 4 Hubcaps - 17-Inches Style Snap-On (Pop-On) Type Matte Black Wheel Covers Hub-caps (Not Fit on Bolt on Type)

  • Fit on snap on type or pop on type 17-Inches steel wheel only. NOT fit on size other than 17-Inches. NOT fit on bolt-on type steel wheel. Not fit on screw-on type steel wheel too..
  • Make with high quality ABS plastic for long lasting durability.
  • Adjustable retention ring to assure maximum grip to wheel.
  • OEM steel wheel hubcap direct replacement.
  • At least 75% Less or cheaper than OEM hubcap.
  • Retention ring must be installed to secure the wheel cover on steel wheel.
  • No special tools required (Not recommended using hammer or screw driver for installation).
  • Sold as a complete set of 4 x 17-Inches Hubcaps - Matte black finish.
Check Stock

#8 x 1-1/4 Deck Screws 316 Marine Grade Stainless Steel Square Drive Type 17 Wood Cutting Point Quantity 100 Size Number 8 x 1-1/4 Long by Fastenere

  • Screw Size #8 (0.164") - Straight Pilot Drill size for Soft Wood 7/64 . Straight Pilot Drill size for Hard Wood 1/8.
  • Screw length measured from top of flat to tip of screw 1-1/4" (1.25") - Screw head Diameter 0.340".
  • Made of highly corrosion resistant 316 Marine Grade Stainless Steel. Type 316 is also used extensively for surgical implants within the hostile environment of the body..
  • Deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface.
Check Stock

#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.
Check Stock

#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.
Check Stock

#10 x 3-1/2 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 2 1/4 of Thread Length 10 Screw Diameter 3 1/2 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
  • Size Number: #10 / Length of Screw is 3-1/2" inches with 2-1/4" inches of thread.
Check Stock

DiCUNO E17 to E26 Adapter, Intermediate E17 Socket to Standard E26 Socket Converter, LED Light Bulb Converter, Max Wattage 200W, 200℃ Heat Resistant (6-Pack)

  • DiCUNO E17 to E26 bulb socket adapter, converts intermediate E17 socket (diameter: 17mm) to standard E26 socket. Save you money and time to find E17 bulbs when you only have E26 bulbs..
  • Maximum Wattage: 200W. Voltage Range: AC 0-250V..
  • CE, RoHS certified. Made of high-quality PBT with high heat resistance of 200℃, safer and more durable. No fire hazard or electric shock. ▲ Please keep it out of enclosed fixtures to ensure good heat dissipation..
  • Easy to use. Just screw it like a bulb into E17 type socket, then screw your E26 bulb into it..
  • Warranty: 1-year warranty and immediate customer service. Any problem please feel free to contact us..
Check Stock

Glo-shine E17 to E26 Adapter,E17 Base Bulb Adapter Converter,Convert Intermediate Socket E17 to Medium Socket E26 (12-pack)

  • 12 packs E17 to E26 socket converter in a pack..
  • Easy to install. Simply screw the socket adapter into E17 type socket, and then screw in an E26 bulb..
  • Enlarge the light bulb socket. Enlarge the intermediate socket E17 to medium socket E26..
  • Applicable with incandescent bulb, CFL bulb & LED bulbs under electric current limitation.
  • Material:Durable temperature Resistance Plastic Housing,Dimension:Dia 39.3 mm X H59 mm / Dia 1.55"X H 2.32".
Check Stock

#12 x 4 Stainless Steel Wood Screw Square Drive Bugle Head Quantity 800 Type 17 Wood Cutting Point 2-3/4 of Thread Length 12 Screw Diameter 4 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #12 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #12 / Length of Screw is 4" inches with 2-3/4" inches of thread.
Check Stock

#8 x 2-1/4 Stainless Steel Deck Screw Phillips Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 1-1/2 of Thread Length 8 Screw Diameter 2-1/4 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Phillips drive.
  • Size Number: #8 / Length of Screw is 2-1/4" inches with 1-1/2" inches of thread.
Check Stock

#10 x 2-3/4\ Stainless Steel Wood Screw Square Drive, Bugle Head (Quantity: 1400) Type 17 Wood Cutting Point, 1-7/8\ of Thread Length, 10 Screw Diameter, 2-3/4\ Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
  • Size Number: #10 / Length of Screw is 2-3/4" inches with 1-7/8" inches of thread.
Check Stock