Jacobs Chuck 30227 Ball Bearing Taper Mount Chuck 0.625 Maximum Capacity 2-5/8 Sleeve Diameter 4-5/16 Close Length
- Ball bearing construction maximizes gripping force and drilling accuracy.
- Jaws center-ground for straightness and alignment. Fluted sleeve standard..
- Each chuck 100 percent inspected for performance and precision.
- Note: the chuck is marked with “service kit # 30346” which is a repair kit for the chuck..
Check Stock
Dreyoo Lock on Air Chuck, 1/4” FNPT Heavy Duty Closed Flow Tire Chuck for Tire Inflator Air Compressor Air Accessory Kit, Standard Bore Valve Stem Quick Connector for Valve Adapter (1)
- Closed Flow: closed flow air chucks feature internal “check valves” that do not allow air to flow to or from the chuck unless the chuck is engaged with a tire valve stem, which makes them more efficient for using directly on an air compressor hose line, since they will not rapidly deplete the air tank unless engaged with a tire valve stem.
- Easy to Use: pushed forward the sleeve to lock the valve stem and pulled back the sleeve to release the lock on air chuck, it makes things easy that you can use one hand to seal and release the chuck.
- Standard Size: the top thread, 1/4 Inch FNPT.
- Heavy Duty: the lock on air chuck, made of steel and zinc, can prevent rust.
- The inside three claws are metal plating to protect them from oxidation.
- Wide Use: the top thread is standard size 1/4 inch FNPT, fit for most tire inflator air compressor, air accessory kit, air compressor accessories, inflator gauge compressor accessories.
Check Stock
Mophorn K11-200 Lathe Chuck 8 Inch 3-jaw,Lathe Chuck Self Centering Reversible Hardened Steel With Internal and External 2 Set Jaws
- Premium Steel Structure: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC 58-62. It has high strength and toughness, compression resistance and durability, and long service life..
- Large Clamping Range: This chuck includes two sets of internal and external jaws. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
- High-Performance Chuck: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
- Effortless Operation: The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
Check StockMAXPOWER 18 in 1 Multi-Bit Ratcheting Screwdriver Set with Cushion Grip Handle
- Features bayonet blade, Rapidaptor with quick release chuck, integrated bit storage and pouch (SL/PH/PZ).
- Two-position Bayonet blade is extendable and can be removed and attached to power tool.
- Multi-component Kraftform handle fits the shape to the hand for the ultimate in comfort and high speed torque transfer.
- Features Rapidaptor bitholder with quick-release chuck for rapid one-handed bit changes for insert and power bits.
Check StockRenekton 3/8” Drill Chuck with 1/4” Quick Change Hex Drive, Convert Impact Driver Hammer and Wrench to Drill
- DURABILITY: The chuck is high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating. All the extensions are applied with rust-proof finishing for extended service life..
- HIGHLY COMPATIBLE: Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16” to 3/8” shank..
- UNIVERSAL SHANK: Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
- MULTI PURPOSE: With included 1/2” Drive by 1/4” Hex adapter, can easily transform power impact wrench to a drill, with best performance under rotation speed between 500rpm ~ 3500rpm..
- INCLUDES: This complete power tool conversion kit includes keyed 3/8” drill chuck, a chuck key and a 1/2” Dr. x 1/4” Hex adaptor..
Check StockAstro Pneumatic Tool 3018 3.5\ Digital Tire Inflator with Hose
- New dual AAA battery powered design. 4X the battery life and simplified battery installation..
- New 21” Stainless braided hose for increased durability.
- Maximum accuracy and 0.1psi resolution for use with TPMS (Tire Pressure Monitoring System).
- Unit covered with rubber sleeve for extra comfort and durability.
- Two position lever. 1st position deflates, 2nd position inflates..
- Works on with nitrogen systems and CO₂.
Check StockDEWALT Corded Drill with Keyless Chuck, 7.8-Amp,1/2-Inch (DW246)
- Single-sleeve keyless chuck with spindle lock provides greater bit retention and tool-free convenience of the electric drill.
- Triple gear reduction provides increased torque and reduces gear stress for the corded drill.
- DEWALT corded drill has rubber grip and two-finger trigger for increased comfort and greater control.
- Metal gear housing for jobsite durability and increased reliability.
- Helical-cut steel and heat-treated steel gears for long life and durability.
Check Stock
3 Inch 4 Jaw Mini Wood Lathe Chuck Self-centering Lathe Chuck with 1 x 8TPI Thread Lathe Chucks for Woodturning
- ✔PERFEXT QUALITY:The well-designed chuck body is made of high-quality steel.Will greatly extend the service life of the chuck..
- ✔APPLICABLE SIZE：The reversible stepped jaws of this mini lathe chuck for internally or externally holding different shapes workpiece,Internal Jaw Clamping Range:3-44mm.External Jaw Clamping Range: 39-85mm..
- ✔FAST CLAMPING SPEED-This self-centering 3-Jaw chuck does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
- ✔FREE ACCESSORIES：We will provide a set of installation tools. Two hand tight spanners are convenient for strengthening and clamping the workpiece..
- ✔WIDE APPLICATION- The chuck is easy to be used and enjoy a high centering precision.The self-centering scroll type chuck for a variety of parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock2Pcs 1/2\ to 1/4\ Router Collet Reduction Sleeve Tool Bit - A3 Carbon Steel Black
- For turning electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4"..
- Easy to install: you only need to put the product in the chuck and fix it, then you can use it, no tools or extra steps are required..
- Material: router bit collet chuck adapter is made of high carbon steel, durable and not easy to wear, suitable for long-term use, tougher and more wear-resistant..
- Package included: 2pcs 1/2" to 1/4" router collet reducer collet reduction sleeve tool bits,it can replace broken parts when your old parts are damaged or lost..
Check Stock
Hromee 8 Pieces Air Chuck Set with Dual Head Tire Chuck, Closed Ball Air Chuck and 1/4 Inch Male Air Plug, Heavy Duty Air Compressor Tire Inflation Tool
- PACKAGE INCLUDES - The kit includes 2PCS dual head air chuck, 2PCS ball air chuck, 2PCS male air fittings and 2PCS thread tape..
- DUAL HEAD CHUCK - with 1/4 inch FNPT air inlet, dual head chuck makes tire valves more accessible with the two heads for easier access. To use inner head when the valve is facing inward, which is great for reaching into dually trucks and other challenging angles..
- CLOSED BALL CHUCK - Ball air chuck is ideal for tire inflation of various tires, including car, truck, SUV and bicycle tires. This air chuck features a built-in shut-off valve seals air when not in use and 1/4 in. NPT female threads..
- EASY TO USE - All the chucks are female NPT so we equip 2 pieces male air plugs for easy connection. And 2 rolls of thread tape are for better seal..
- HEAVY DUTY&STURDY - They are all made from steel and copper plated which features good corrosion resistance and wear resistance, you can use them for long time. Perfect for tire inflating and measuring the pressure..
Check StockJET JBM-5 Benchtop Mortiser, 1/2HP, 115V 1PH, 1750 RPM (708580)
- Durability and Stability: Heavy-duty cast iron and steel construction..
- Accurate Position Control: Dependable rack-and-pinion head adjustment..
- Optimal Handle Position: Long, multi-position mortising handle lets you reposition the feed handle for easier operation..
- Three-Jaw Drill Chuck: Keeps a positive grip on mortising bits with up to 3/8" diameter shanks..
- Easy Chuck Changes: Two hinged side doors allow easy access to the drill chuck..
Check Stock
7-Piece Complete Socket Conversion and Adapter Kit for Ratchet, Extension Bar, Impact Wrench, Impact Driver, Power Drill | Fit All 1/4”, 3/8” and 1/2” Drive Deep and Shallow, Chrome and Impact Sockets
- Material: chrome vanadium steel. Chrome vanadium steel suitable for heavy duty impact drivers. Spring loaded ball bearings on each square head securely and locks into sockets to avoid slippage during using..
- This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool. The 1/4" hex shank fits all quick change chucks as well as standard drill chucks..
- Suitable for a screwdriver or electric screwdriver handle tools (hexagonal hole or three-jaw chuck can) drive sleeve and after use can be installed on the size of the original hexagonal polygons converted to square head size, which can be used to install the sleeve is a good accessory to convert..
- 8pcs 1/4" 3/8" 1/2" CR-V impact socket adapter Sizes: 4 pieces of 1/4 inch drives, 2 pieces of 3/8 inch drives, 2 pieces of 1/2 inch drives. Compatible with power drills and screwdriver handle tools..
- Suitable for quick change 1/4" chuck systems or directly into drill chuck. Change your hand socket set into a driven socket set..
Check StockMade in USA Rhino GPD-30 Ranch Pro Honda 4-stroke 35.8cc Gas Powered Post Driver
- The 1-3/4" heavy wall chuck makes this a perfect choice for T-Posts and Ground Rods..
- Legendary reliability: Honda GX35 4-stroke industrial engine. This tool has passed the stringent Honda US Certification process..
- Includes 1" chuck sleeve for driving Ground Rods..
- Steel skid plate protects the engine and provides rugged durability..
Check Stock
