Reviews Two Section Clamp

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...t is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

JEBUTU Super Clamp with 1/4' and 3/8' Thread and Upgraded One Section 13 inches/34cm Adjustable Articulating Friction Magic Arm with 1/4' Thread Screw for LED Light, Flash Light, Microphone, Monitor

  • 【Kit Includes】 (1)One Section 13 inches Articulating Friction Magic Arm.
  • (1)GoPro Adapter.Note: LED Light, Flash Light, Microphone, Monitor, Cage Not Included..
  • 【About Super Clamp】Super clamp comes with 1/4" and 3/8" threads. It can open a maximum of 5cm and can be mounted practically anywhere, for example, desk, crossbars, and other places where the thickness is less than 5cm.The opening of the super clamp is provided with an anti-skid rubber to help it lock tighter..
  • 【Wide Compatibility】The both ends of the articulating arm have a standard 1/4" screw is compatible with LED video Light, Flash, Microphone, Phone Holder, Super Clamp, and other accessories with 1/4" screws hole, such as phone/camera cage, fixing frame, etc..
  • 【Widely Shooting Angle】With 360-degree ball heads of the friction arm, it can support features an adjustable shooting angle. providing a wide range of shooting horizons, capturing any position footage..
  • 【Solid & Durable】: The magic arm with clamp is made of aluminum alloy, solid with higher durability.
  • Two knobs control its direction separately, easy to mount, adjust and place. The maximum load capacity of the magic arm is about 2.2lbs/1kg..
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ...t is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ...t is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ...t is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ...t is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATION / USE.
Check Stock

InnoGear Microphone Stand, Desk Mic Stand Adjustable Boom Arm Stand with 3/8' to 5/8' Screw Adapter Mic Clip for Blue Yeti, Yeti Nano, Snowball and other Mic

  • ...: By rotating the height clutch, the height of stand is adjustable from 10.8 inches to 14 inches. The boom arm swivels and has a good range of motion. The included mic clip can be rotated by 180°. Easy to use and set up the height and angle you want..
  • Lengthened Boom Arm: The telescoping boom arm is upgraded to two-section, compared to single-section arm of others on the market. The length of boom arm is adjustable from 16 inches to 28 inches. Sturdy, silent and great reach. Noted: When it goes to the max length, recommended to have the second pole remained 1 inch inside the boom arm..
  • Enhanced Load-bearing: One 1.1lbs solid counterweight is fixed to one end of the boom arm, improving the load-bearing capacity. When the arm is at the min length of 16 inches, it reaches the max load of 6.6lb/3.0kg and when the arm is at the max length of 28 inches, it reaches the min load of 3.3lb/1.5kg. Strong enough to hold your microphone steadily while in use..
  • Upgraded Table Mounting Clamp: With the mounting position of the stand in the center, the upgraded desk clamp could stably clip to any desktop up to 2.2 inches thick. The diameter of metal gasket is increased to 38mm to enlarge contact surface and further enhance stability. A rubber pad is built on the clamp ....
Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • ...t is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • ...it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Ettore 45700 2-Section All Purpose Interlock Pole with Click Lock Tip 7-Feet,Blue White

  • Lightweight two section All Purpose extension provides high reach for cleaning needs.
  • Easily extends 7 feet with quick open/close tapered clamp design.
  • Fluted for strength and better gripping when wet.
  • Click-lock tips secures Ettore cleaning tools to extension pole.
Check Stock

AA-Racks Model X31 800Ibs Capacity Extendable Steel Pick-Up Truck Ladder Rack Two-bar Set - Black

  • The X31 features a tested loading capacity of 800 lbs.It is powder coated in the color of black.
  • The rope hook on the side of all four uprights provides the security for tying the tools or loads.
  • There are FIVE drilling holes on the upright plate, which make X31 more compatible bolting on different sizes of bed margins.You could choose our C-Clamp (ASIN:B0789DDLBJ) for which No Drilling Required.
  • The top section is built with Two "T" sleeve bars plus Middle Cross Bar. The Double-barred Middle section won't easily dent or bend, making it even stronger than a one-barred design.
  • The extendable design also makes it compatible with different Truck-bed Width ranged from Min.51" - Max.71".
Check Stock

Luvay Piano Tuning Kit Tools 10 items Professional Hammer/Lever Felt Mutes Fork

  • Tuning hammer/lever x1: size #2, star-shaped tip, wood handle, stabile & quality.
  • Felt Temperament strip mute x1: used to mute outside strings of one section.
  • Rubber wedge mute x3: for left and center sections.
  • Mute Clamp x1 + Rubber Mute(with handle) x1, easy to work on right section.
  • Felt Mute x1: made of quality woll felt, for left section.
Check Stock