Reviews Twist Lock Fittings

If I Had a Hammer (Live at PJ's 1963)

  • Fittings: 3/4 inch | Universal Twist Lock Hose Inner Diameter: 3/4 inch.
  • Safety Factor: 4:1 | Burst Pressure: 1200 PSI.
Check Stock

Interstate Pneumatics HJ19-100E Jack Hammer Red Rhino Rubber Hose 3/4 Inch x 100 Feet 300 PSI

  • Fittings: 3/4 inch | Universal Twist Lock Hose Inner Diameter: 3/4 inch.
  • Safety Factor: 4:1 | Burst Pressure: 1200 PSI.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

Orbit 50021 In-Ground Blu-Lock Tubing System and Digital Hose Faucet Timer, 2-Zone Sprinkler Kit

  • EVERYTHING YOU NEED: Sprinkler System Kit contains digital timer, 12 high-efficiency sprinklers, Blu-Lock tubing and fittings, tubing cutter, and 200 lb. pressure gauge.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installations faster and easier on your hands.
  • WATER MULTIPLE AREAS: The digital timer waters up to two watering areas.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installation faster and easier on your hands.
  • ENVIRONMENTALLY FRIENDLY: Blu-Lock requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.
  • CONSERVE WATER: The digital timer features rain delay so you arent watering in the rain.
  • FLEXIBLE PROGRAMMING: A run time of 1-240 minutes, with intervals from every 6 hours to once every 7 days.
  • PUSH-ON QUICK RELEASE FITTINGS: Blu-Lock tubing system is the easiest install with push-on fittings and quick release collars for easy removal. The stronger the water pressure, the more the retaining rings grip the pipe.
  • PART OR FULL CIRCLE: Simple to adjust from 40 to 360 degrees while the water is on or off.
  • AREA COVERAGE: Ideal for medium to medium....
Check Stock

Drip Irrigation Kit Automatic Watering System Drip Irrigation System 82FT 1/4" Blank Distribution Hose DIY Micro Irrigation Kit Saving Water with Adjustable Dripper for Greenhouse Patio Lawn

  • EVERYTHING YOU NEED: Sprinkler System Kit contains digital timer, 12 high-efficiency sprinklers, Blu-Lock tubing and fittings, tubing cutter, and 200 lb. pressure gauge.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installations faster and easier on your hands.
  • WATER MULTIPLE AREAS: The digital timer waters up to two watering areas.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installation faster and easier on your hands.
  • ENVIRONMENTALLY FRIENDLY: Blu-Lock requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.
Check Stock

20 PCS Furniture Connecter Cam Lock Fittings 15mm x 12mm for Cabinet Drawer Dresser and Wardrobe Furniture Panel Connecting

  • Package included: 20 PCS furniture connecter cam lock fittings.
  • Easy to install, thicken material, solid and durable, not easy to twist off, long service life.
  • Fit for various types of furniture, cabinet, drawer dresser, wardrobe and furniture panel.(Please check the size before buying).
Check Stock

In-Ground Sprinkler System with Hose Watering Timer

  • EVERYTHING YOU NEED: Kit contains digital timer, 6 high-efficiency sprinklers, Blu-Lock tubing and fittings, tubing cutter, and 200 lb. pressure gauge.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installations faster and easier on your hands.
  • PUSH-ON QUICK-RELEASE FITTINGS: Blu-Lock quick-release collars allow for easy removal, yet the stronger the water pressure, the more the retaining rings grip the pipe to ensure against leaks.
  • ENVIRONMENTALLY FRIENDLY: Blu-Lock requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.
  • CONSERVE WATER: The timer features rain delay so you arent watering in the rain.
  • FLEXIBLE PROGRAMMING: A run time of 1-240 minutes, with intervals from every 6 hours to once every 7 days.
  • AREA COVERAGE: Ideal for medium to medium-large area coverage from 2,300-6,900 sq. ft. with average residential water pressure and flow.
  • ADJUSTABLE DISTANCE: Easy to adjust spray distance for each sprinkler from 15-25 ft. radius.
  • PART OR FULL CIRCLE: Simple to adjust from 40 to 360 degrees while the water is on or off.
  • TOOLS INCLUDED: Test water pressure before installation with the included 200 lb. gauge to ensure system....
Check Stock

Patio Misting Kit - 250 PSI Patio misting System - Made in USA Pump - Up to 40 Nozzles Misting System - for Residential Misting System - Stainless Steel Misting Nozzles (10 Nozzle System)

  • {SYSTEM COMPONENTS} Base 10 Nozzle Mist Kit Includes: 1- 250 psi mid pressure pump with built-in solenoid and filtration.
  • 10- cleanable brass/stainless steel Nozzles (0.012").
  • Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • {MADE IN USA PUMP} Whisper quiet operation Built in Solenoid Valve.
  • Outdoor Enclosure Wall Mountable Enclosure Max Pump Pressure 250 Psi 110v AC (Available in 12vdc and 220v on request) Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable push lock fittings.
  • {APPLICATIONS) Residential Misting, Industrial Cooling, Warehouse Misting, Outdoor Restaurant.
  • {FITTINGS FEATURES} Fittings are Brass /Nickel Plated Fittings - to Make your Misting System more durable.
  • {SUPPORT} 24/7 Support from mistcooling Texas. MC12080-MC12092.
Check Stock

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

  • 1Pc 6AN 25 feet of high-pressure fuel injection hose.
  • 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
  • 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
  • 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check Stock

Culligan IC 1 EZ-Change Inline Icemaker and Refrigerator Filtration System, Basic 3,000 Gallon Filter Included

  • Inline refrigerator and icemaker filter with easy change filter.
  • EZ change replacement filter cartridge with quick connect fittings, just twist on and twist off.
  • The included RC-EZ-1 filter cartridge reduces: particulates class III, chloride and removes bad taste and odor from water.
  • The included RC-EZ-1 filter cartridge is tested and certified by NSF International to NSF/ANSI Standard 42 for the aesthetic reduction of Chlorine Taste and Odor and Nominal Particulate Class III.
  • The included RC-EZ-1 cartridge can filter up to 3,000 gallons of water or can last for 12 months.
  • Includes: head assembly, RC-EZ-1 filter cartridge, mounting screws, cartridge change reminder sticker.
  • Head assembly fits replacement cartridges, RC-EZ-1, RC-EZ-3 and RC-EZ-4.
  • Water flow rate from faucet, .5 gpm at 60 psi.
  • Features twist-on and twist-off mechanism, quick connect fittings double water shutoff.
  • Reduces bad taste and odor, chlorine taste and odor, and particulate class III.
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Kegco 5 Gallon Ball Lock Keg - RubberHandle

  • ...p handle that makes it easy to carry and stack, making it ideal for smaller breweries and home brewers with limited available storage space. The keg has a stainless steel lid that fastens tightly to the body and features an integrated pressure release valve that allows you to easily depressurize the keg..
  • BALL LOCK FITTINGS: This ball lock Cornelius Pepsi home brew beer keg features ball lock fittings that are designed for use with ball lock keg couplers. The ball lock fittings can be easily accessed to make cleaning and maintenance fast and simple..
  • KEG DIMENSIONS: The keg measures 25″ tall and 8.5″ in diameter..
Check Stock

Valterra 2101X PVC Gate Valve, White, 1-1/2\ Inner Diameter, 1.9\ Outer Diameter Unibody Valve, Slip w/ Gate Keeper

  • APPLICATIONS: Ideal for quick opening and shut off in vacuum or pressure applications - Can be used with air or clean water up to 75 PSI.
  • KEY FEATURES: Unrestricted flow - Full Port - Simple push pull operation - Twist lock closure & Gate Keeper to hold open - Solvent traps help keep solvent out of seal area.
  • SPECIFICATIONS: Working pressure of 75 PSI in both open and closed postions - Sch 40 PVC with female Slip/Hub fittings - All materials resist corrosion and mild chemicals.
  • REPAIRS: Non-repairable body - Handle is threaded for easy replacement.
Check Stock