Tomersun 4 Blades Heat Powered Stove Fireplace Fan for Home Wood Log Burning Fireplace Circulating Warm Air Saving Fuel Efficiently
- Necessary Fireplace Accessories- the stove fan is widely used for gas, electric, pellet stove or wood burning stove, stove fans will work well and disperse hot air efficiently. wood stove fireplace fan.
- Eco Friendly-The stove fan is powered by heat from your fireplace or wood burning stove, no batteries or electricity required. The hotter the stove is, the faster the stove fan spins. wood stove fireplace fan.
- Silent Operation- The only moving part of the stove fan is the blades assembly, so the working noise is below 25DB, very quiet. You even do not know the stove fan is there, but you will feel the warmth well. wood stove fireplace fan.
- Operating Temperature- The general working temperature of the stove fan is 85°C - 350°C(185°F - 660°F). Usually the fan gets spinning at about 55°C, and turns most efficiently when the temperature reaches about 250°C-300°C. wood stove fireplace fan.
- Overheating Protection-The In-built Bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the thermoelectric module. wood stove fireplace fan.
Check StockHeat Powered Wood Stove Fan, Vodche 4 Blades Fireplace Stove Fan, Large Airflow 50% Fuel Cost Saving, Eco Stove Fan for Gas/Pellet/Wood/Log Burner/Fireplace, with Hanging Hook, Black
- 【Heat Powered, No Electricity, Automatic Working】The stove fan does not require additional electricity or batteries, and is powered by heat. Put the stove fan on the stove steadily. When the fan base is heated to 158°F (70°C), the fan will automatically start and work normally. As the stove heats up, the fireplace fan runs faster. Effectively dispersing warm air around your room. It's a real energy saving and eco friendly wood stove accessories in winter..
- 【Temperature Label Added, Upgraded Overheat Protection】We have added a thermal temperature label on the top of the heat powered stove fan to real-time monitor the surface temperature of the fan radiator. Together with the magnetic stove thermometer that we presented to you in the package, double protection of your fireplace fan. (Note: The normal working environment temperature of the stove fan: 158°F-653°F).
- 【Silent Running, Low Noise(<32dB)】The newly designed blade surface is polished to reduce resistance. The upgraded motor allows the stove fan to running more smoothly, stably, quietly and comfortably. While ensuring the wind speed, this stove fan works with a low noise of less than 32dB, providing you with a quiet guarantee for reading and working, and filling the warm air aroun....
Check StockWood Stove Fan, Fireplace Fan for Wood Burning Stove, Heat Powered fan, Wood Stove Accessories, Quiet Operation Circulating Warm Air, (Include Magnetic Thermometer) (5-Blade)
- 【Upgrade 5 Blades WoodStove fan】The Cocoon fan for wood stove is equipped with 5 Blades, has Faster Speed and Larger Air Volume than 4 Blades, The heat active stove fan is designed to circulate the warm air created by a wood/coal or pellet-burning. Efficiently circulates warm air throughout the room.
- 【Heated Powered Stove Fan Non-electirc】Our Thermal fan for wood stove is an Environment-friendly Eco fan. The thermoelectric module acts as a small generator to power the fan's motor. No batteries or power required! Improved warm air circulation results in greater comfort and reduces wood consumption from your stove.
- 【Quiet Operation】 This stove fan's noise level is less than 25 dB, which gives you a Quiet atmosphere. The stove fan is designed to be used with coal, pellet, or wood-burning stoves.
- 【Quality Warranty】If any issues, please reach out to us via amazon or service Mail. The Package comes with a stove fan and a free Stove accessory -thermometer. please put fan on the side of the chimney, (leave a space of 15cm behind the fan) so that the fan can blow hot air into the room.
Check StockWood Stove Fan Heat Powered, 12 Blade Fireplace Fan Non-Electric, Thermoelectric Fan EcoFan for Wood Burning Stove/Pellet/Log Burner (with Accessories Magnetic Thermometer), Dual Motors
- 【Heat Powered Stove Fan】 This wood stove fan doesn’t require any external power or electricity, it uses thermoelectric technology to push warm air escaping into the room, which not only helps you warm home but also lowers the fuel consumption of log burner. You just need to put the stove fan on a flat surface of stove top.
- 【Double stove Fan】The 12-blade Heat Powered Stove Fan distributes heat more evenly, so you get more heat where you need it.
- 【Overheating Protection】The cocoon fan has an inbuilt bimetallic safety device at the base. This bimetallic safety device gently lifts the front of the fan once the temperature crosses 644°F/340°C in order to protect the motor and electricity generating unit. And the speed of the fan will also indicate whether need to add logwood.
- 【Silent Operating】This wood stove eco fan with a noise level of less than 25 dB, gives you a peaceful atmosphere. The thermal fan is designed to be used with coal, pellet or wood burning stoves, can improve circulation of warm air.
- 【Quality After-Sales Service】The package includes a stove fan and a free magnetic thermometer. Please place the heat stove fan next to the chimney (allowing about 15cm of space behind the fan), so that the fan pushes the warm air o....
Check StockTCFUNDY Wood Stove Fan, 6 Blades Heat Powered Fireplace Fan for Wood Burning Stove, Eco Stove Fans Warm Air Circulation for Home Wood/Log Burner/Fireplace
- 【Non-Electric & Heated Powered Fireplace Fan】 TCFUNDY stove fan is an Eco-friendly fireplace fan for wood burning stove. It uses thermoelectric technology to power, the stove fan will automatically rotate with the temperature getting higher, no batteries or electricity required. Not only warm your room faster, it also saves the fuel consumption and your bills..
- 【Upgraded 6-Blades Wood Stove Fan】The heat powered stove fan is equipped with 6 blades for softer wind, greater airflow and faster speed. This design is designed to effectively circulate warm air throughout the room. You just need to place this stove fan on flat surface of the stovetop. The optimum operating temp is 80℃-250℃ (176℉-482℉), DO NOT over 350℃ (662℉)..
- 【Overheating Protection】Our stove fan has built-in high temperature protection at the base of the fan. The safety device gently raises the front of the fan to protect the TEG and the motor If the surface temperature exceeds 300°C..
- 【Low Noise Operation】 This heat powered stove fan with less than 25db noise, provide a quiet and comfortable environment. Use stove fan for wood b....
Check StockHAWCAFU Wood Stove Fan Heat Powered Fireplace Fan 4 Blades Eco Fan Wood Buring Stove Top Fan for Wood/ Log Burner/ Fireplace
- 【Save Your Bill, More Efficiency】The wood stove fan fully utilize the heat from your wood stove and disperse it to your room. The stove top fan uses 28% less wood. It's a wonderful natural circulation element. You can enjoy warmth in your room, increasing your comfort..
- 【Powered by Heat, Healthy and Economical】 Our heat powered fan for wood burner stove, gets power from the HEAT produced by your fireplace, wood burning stove or pellet stove. Effectively dispersing warm air around your room..
- 【Overheating Protection】 Our eco fan comes with a bi-metallic safety device at the base. When the surface temperature rises above around 650℉ /345℃, it will gently lift the front of the thermal fan to protect the TEG. The stove top fan will automatically recover normally as the surface temperature decreases..
- 【Silent Operation】Really impressed, our heat powered stove fan is virtually silent despite going round at an impressive speed of knots and really does blow the warm air onto the room. Results in greater comfort and reduce wood consumption from your wood stove. More stable and environmental protection..
Check StockTCFUNDY Wood Stove Fan Heat Powered, 8 Blades Fireplace Fan for Wood Burning Stove, Eco Stove Fans Air Circulation Heating for Gas/Wood/Log Burner Stove, Dual Motors
- 【Non-Electric & Heated Powered Fireplace Fan】 TCFUNDY stove fan is an Eco-friendly fireplace fan for wood burning stove. It uses thermoelectric technology to power, the stove fan will automatically rotate with the temperature getting higher, no batteries or electricity required. Not only warm your room faster, it also saves the fuel consumption and your bills..
- 【Dual Motors Wood Stove Fan】The heat powered stove fan is equipped with 8 blades for softer wind, greater airflow and faster speed, double motors design for distributes heat more evenly, effectively circulate warm air throughout the room. You just need to place this stove fan on flat surface of the stovetop. The optimum operating temp is 80℃-250℃ (176℉-482℉), DO NOT over 350℃ (662℉)..
- 【Overheating Protection】Our stove fan has built-in high temperature protection at the base of the fan. The safety device gently raises the front of the fan to protect the TEG and the motor If the surface temperature exceeds 300°C..
- 【Low Noise Operation】 This heat powered stove fan with less than 25db noise, provide a quiet and comfortable environment. Us....
Check StockWeyderk Wood Stove Fan Heat Powered, 5 Blades Non Electric Ecofan, Thermoelectric Fireplace Cocoon fans for Log/Wood/Pellet Buring stoves, Save Fuel&Efficient Heat Transfer (With Thermometer)
- 【Upgrade Wood Stove Fan non Electric】 HuiDun 5 blades wood stove fan will circulate larger volumes of warm air, diverting the warm air horizontally all around your house rather than going straight up top the ceil. This wood stove fan non electric is widely used in wood stoves, gas stoves, log burners, Fireplaces, etc..
- 【High-quality Ecofan Wood Stove Fan】 This fireplace fan base and blade are made from rust-proof anodized aluminum, wear-resisting, with good thermal conductivity. The ecofan is able to no deformation and no discoloration even after a long time working under high temperature..
- 【Non Electric Fan/Ecofan】 The heat powered fan converts heat energy from the stove surface into kinetic energy to spin, and adjust its speed automatically with the stove surface temperature. No batteries or electricity is required. Working Temp is 150F-662F..
- 【Ultra Quiet Cocoon Fan】 Newly designed blade, larger air volume, lower noise. The noise level of this cocoon fan for wood stove heat-powered is less than 25 dB. You will hear virtually no sound at all. Satisfy you to enjoy warmth and comfort in a quiet environm....
Check StockSignstek 4 Blades Heat Powered Wood Stove Fan for Wood/Log Burner/Fireplace/Heater, Non Electric, Quiet, Eco Friendly Black Stove Fans, Circulating Warm Air Saving Fuel, Upgrade Design
- 【Durability Fireplace Accessories】 Upgraded 4-Blade Heat powered wood stove fan ST-145 is able to spread heat around room and increase temperature, improve warm air circulation results in greater comfort and reduce wood consumption from your stove. Eco-friendly Warm Air Circulation, keeps you a comfortable room in winter..
- 【Silent Operation Imported Motor】 The motor of our stove fan is imported from Japan, smooth and super quiet, the noise of the wood stove fan is less than 25db when operating. Longer service life and environmental protection. Effectively evenly distribute warm air throughout the room, reducing the fuel burned for you in the cold day..
- 【No Additional Running Costs】Heat powered - no batteries or electricity required, the stove fan is powered by heat from the fireplace or wood burning stove, the fireplace fan automatically adjusts its rotation speed with the temperature of the surface of the stove..
- 【Overheating Protection】 To protect the motor and the thermoelectric module, the In-built Bi-metallic strip at the base of the stove fan will raise the edge of the fan slightly when the maximum operating temperature is approached. The wood fireplace fan can withstand normal surface temperature between 140℉ to 653℉ (60....
Check StockVODA Wood Stove Fan 5 Blades Newly designed Small Heat Powered Fans Fireplace Eco Fans for Wood/Log Burner/Fireplace(Black)
- 【5 Blades】Newly designed 5-Blade stove fan helps provide larger air volume, diverting the warm air horizontally instead of vertically all around and make your room warmer faster.A great way to make full use of the heat from your stovetop, and widely used for wood burning stove, pellet stove and more..
- 【Silent Operation】The working noise of this stove fan is less than 25db because the only moving part is the blades assembled, which makes the wood stove fan almost silent even at the highest speed. You even do not know the stove fan is there, but you will still feel a breeze, but not wind from the fireplace fan..
- 【Energy Saving】No batteries or electricity required. This wood burning fan is driven by energy generated from the heat of your stovetop.The fan will starts spinning automatically as the stove temperature hits a certain range. The hotter the stovetop is, the faster the fan rotates..
- 【Operating temperature】The working temperature of this wood stove fan is 85-350°C.It starts spinning when the temperature gets around 55°C, and works most efficiently when the temperature gets around 200-300°C. But p....
Check StockHolldoor 12 Blades Fireplaced Fan Non Electric, Wood Stove Fan Heat Powered, Stove Fan with Magnetic Thermometer for Wood Burning Stove/Log Burner (Black)
- Heat Powered Wood Stove Fan: No batteries or electricity required - The fireplace fan uses the principle of the Seebeck effect to generate energy through the heat to run! A wood stove fan dissipates the heat from the stove throughout the room, In addition to saving on electricity bills, it improves the overall efficiency of the wood stove, burning less fuel to keep the space warm..
- More Efficiency & Stable: Different from ordinary wood stove fans, this fireplace fan is equipped with 12 blades circulates 80% more warm air than standard 4-blade or 6-blade fan. Heat Powered Stove Fan distributes heat more evenly, so you get more heat where you need it. In addition, this symmetrical structural design makes the heat powered stove fan site more stable..
- Silent Operation with Powerful Motor: This fireplaced fan comes with a powerful motor imported from Japan. The premium motor with a noise level of less than 25 dB, gives you a peaceful atmosphere. So you will get a quiet room in a winter snow day. Most importance is Longer service life and environmental protection for this wood stove fan..
Check Stock6 Blade Wood Stove Fan Heat Powered, Non Electric Fireplace Fan with Stove Top Thermal Fan Thermometer for Wood Burning Stove / Fireplace
- UPGRADE 6 BLADES FIREPLACe FAN – Different from old 4 blades wood stove fans, our 6 blades heat powered stove fan will provide larger and wider air volume, more efficiency diverting the warm air horizontally all-around your house. That’s why we choose 6-blade fireplace fan instead of traditional 4-blades heat powered fan..
- HEAT POWERED DESIGN – It’s time to say goodbye to ordinary electric heating fans. Just put this wood burning fan on your wood stove, then the non electric stove fan blades start rotating magically. Because the thermal energy from the stove will be converted into kinetic energy. Save money, save energy..
- SUPER MOTOR WITH 2 YEAR WARRANTY - Full of Power, the wood stove blower fan start rotates when the temperature reaches 40-50°C. But you will find some brands’ thermal fans can’t last for a few months because of the low quality motor. Fortunately, we can provide a 2-YEAR WARRANTY for our customers. Any problems will be resolved within 24 hours for this stove top fan..
- OVERHEATING PROTECTION FOR SAFE - Our heat activated fan has an overheat protection device. The fireplace fan comes with a bimetallic safety device in the base of the thermo electric fan. When the surface temperature rises above around 250℃, it wil....
Check StockTOMERSUN 3 Blades Heat Powered Stove Fan for Wood/Log Burner/Fireplace
- Compact Size--8.7 x 6.7 x 3.6 inches, the material of the stove fan is aluminum..
- No Batteries or Electricity required--The wood burner fan uses heat from the stove surface to spin, adjusting its speed automatically with the stove surface temperature..
- Longer lifetime--There is a Bi-metallic safety device at the base of the stove fan. If the surface temperature rises around 300℃, the safety device gently elevates the front of the fan to protect the TEG and motor..
- Whisper-quiet--The only moving part of this heat powered fan is the blade assembled. You don't even know the stove fan is there, but you will FEEL the WARMTH!.
- Less Consumption, More Efficiency--The stove fan will help reduce the fuel consumption and make the room warmer quickly..
Check Stock