Reviews Turning Set

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood,Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

Hollower Swan Neck Woodturning Lathe Tipped Tool Bended Lathe Chisel Tool Hollower with 12mm Round Carbide Insert and a Screw and star key wrench for wood hobbyist or DIY or carpenter, RC-12

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood,Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of inde....
Check Stock

DEEFIINE Carbide Tipped Wood Lathe Turning Tools Set, Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable 19.5"Soft Grip Handle with Diamond Round Square Carbide Inserts

  • Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Ergonomic design: the turning tool kit is equipped with soft handle, fits comfortably in the hand,It has the characteristics of anti-skid, breathable, shock absorption, etc.
  • Easy to use: our woodturning tool makes the turning of wood considerably easier. This set of carbide rotary tools is very suitable for all levels of experience and makes wood turning faster and more interesting. Each lathe tool has two carbide tips with multiple sharp edges that can be rotated multiple times. Simply turn the knife head a....
Check Stock

Hurricane Turning Tools, HTT-102, High Speed Steel, 5/8\ Bowl Gouge (1/2\ Flute) for Woodturning

  • ✅ WOOD LATHE BOWL GOUGE Our wood lathe bowl tools have greatly simplified wood turning, This set of lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable, contains 3 separate bowl gouges, overall length is 22.5 inches each..
  • ✅ BLADE 9 inch/ 230mm, made from hardened and tempered high speed steel (HSS) that that will keep a sharpened edge about 8x longer than carbon steel and will give you years of use..
  • ✅ HANDLE 13.5 inch/ 340mm, Hard and Solid beech wood, Ergonomics design makes it more comfortable while doing turning job..
  • ✅ CONTENTS This lathe chisel set includes one piece of 1/4 inch, one piece of 3/8 inch and one piece of ½ inch bowl gauges-wood turning tool, packed in a wooden storage case..
  • ✅ SATISFACTION GUARANTEE Our number one priority is customer satisfaction! If you aren’t happy with our lathe bowl turning tools we offer a no questions asked, 100% money back guarantee..
Check Stock

The Lathe Of Heaven

  • The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

5 PC 3/8'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • 5 PC 3/8'' indexable carbide insert turning tool bit set + 10 PC carbide tip combo.
  • 5 PC 3/8'' indexable carbide insert turning tool bit set specs:Shank Diameter: 3/8".
  • AL/AR Style 0 degree Lead, BL/BR Style 15 degree Lead, E Style 30 degree Lead.
  • 10 PC 3/8'' Inserts TCMT 2151 specs:Case overall dimension: 1-1/2''L x 3-3/4''W x 1/2''H.
  • Quantity: 1 set (5 pcs 3/8'' indexable carbide turn tool bit set + 10 pc carbide tips).
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • 【Complete Wood Turning Chisels Carbide】IRONWALLS carbide tipped wood lathe turning tools set for woodworking includes 1 x 11.2” Interchangeable grip handle, 1 x 10.6” Extension Rod, 4 x 9.6” stainless steel arbor shafts, 2 x round inserts, 2 x square inserts, 2 x diamond inserts, 2 x square circle inserts, 1 x T15 wrench, 1 x L-shape wrench and beautifully packaged in an easy-to-store & carry aluminum box..
  • 【Adjusted Freely for Different Applications】Designed with a small lock on the lathe tool handle and coming with a removable extension rod, you can adjust the length of the shafts and the overall length of the carbide lathe tools woodworking freely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
  • 【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacemen....
Check Stock

3 piece Large Carbide Turning Tool Replacement Cutter Set 1 each Square Round and Diamond Shaped Cutters

  • Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen....
  • Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply....
  • Carbide cutters don’t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to....
  • These three cutters have been designed to replace the 3 cutters that come with the Savannah 3 piece large carbide turning tool set. However, the....
  • We offer the cutters in a 3 pack that includes 1 each of the most commonly used profiles. This pack also includes 2 screws for securing the cutters to....
Check Stock

Robert Sorby H6542 Turning Tool Set (8 Piece)

  • This 8-pc HSS Turning Tool Set includes 3/4" Roughing Gouge.
  • This HSS Turning Tool Set includes 3/4" roughing gouge.
Check Stock

Aloris Tool AXA-1S Oversized Turning and Facing Holder

  • OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
  • Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

Turning Insert Holder SVVCN 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 100mm Length.

  • ★Packing : 1pcs MTJNR5/8" , 1pcs MWLNR5/8" ,1pcs MCLNR5/8" ,1pcs SER5/8" turning holder , 4pcs carbide turning inserts and 3pcs wrenches..
  • ★ASZLBYM lathe tool holder set : Shank size: 5/8" inch x 5/8" inch.
  • Overall Length: 4"inch, cutting direction:right cutting..
  • ★Turning holders : turning holder are made of high quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning holder , for long time use..
  • ★Turning inserts : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ★The holders are packed in a premuim aluminium carrying case,easy to carry..
Check Stock