Reviews Turning Bar

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

The Bar Method Super Sculpting II Workout

  • WE OFFER MORE THAN OTHER BARRE WORKOUT EQUIPMENT, FOR LESS! FEELS PERFECT for ballerina to hold at 1.5 dia, 4 feet long, smooth sanded premium beech wood with no splinters. NO WOBBLE NO SLIDE – high tensile steel brackets and strong locking screws. Our dance bars includes TURNING BOARD worth $15..
  • FEELS PERFECT TO HOLD Perfect your craft on a bar that DOESN’T BEND and has NO SPLINTERS, thanks to the premium beech wood finish and SMOOTH SANDED surface. At 1.5 inch diameter and 4 feet length, this ballet equipment feels just right to clasp into your palm. Also known as dance barre for home, ballerina bar, exercise ballet bar, Portable ballet barre for home, balle barre equipment for home, balance bar workout, ballet exercise equipment, barre ballet workout, ballet barre portable for home.
  • NO, OUR BAR DOESN’T WOBBLE OR SLIDE! Wobbling is a common problem with ballet bars. The ballet bar wall mount is designed to with high tensile powder coated steel brackets and strong locking screws. Your ballet bar doesn’t wobble or slide while in use..
  • INCLUDES A TURNING BOARD WORTH $15 Perfect your pirouette and master your spinnin....
Check Stock

Carbide Inserts Dowel Maker Dowel Plate Wood Raw Materials Rods Wood Sticks Maker Dowel Round Bar Auxiliary Tool Metric 3 Holes 10mm 12mm 14mm

  • ROUNDING BAR TURINING TOOL: This is a turning auxiliary tools for turning square sticks to making round sticks applied to electric drills..
  • PACKAGE INCLUDES: Rounding stick turning jig*1, Blade*3, Wrench*1..
  • SIZE: The size is 3.5*2.5*13cm, and the three blades on the jig can be adjusted and fixed by a wrench..
  • HOW TO USE: Sharpen both ends of the square stick embryo, then fix the Rounding Bar Turning Tools on the work surface, and finally rotate the square stick embryo with the electric drill and pass through the hole on the jig..
  • APPLICATION: Turning aids jig are commonly used in woodworking activities to make wooden round bars with diameters of 10mm, 12mm, and 14mm..
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

B BRANTON Ballet Barre Workout Equipment Bundle - 4’ Height Adjustable Lightweight 5 Piece Home Dance Set Including Ballet Bar and Leg Stretcher - Ballet Exercise Set for Home Practice

  • WE OFFER MORE THAN OTHER BARRE WORKOUT EQUIPMENT, FOR LESS! FEELS PERFECT for ballerina to hold at 1.5 dia, 4 feet long, smooth sanded premium beech wood with no splinters. NO WOBBLE NO SLIDE – high tensile steel brackets and strong locking screws. Our dance bars includes TURNING BOARD worth $15..
  • FEELS PERFECT TO HOLD Perfect your craft on a bar that DOESN’T BEND and has NO SPLINTERS, thanks to the premium beech wood finish and SMOOTH SANDED surface. At 1.5 inch diameter and 4 feet length, this ballet equipment feels just right to clasp into your palm. Also known as dance barre for home, ballerina bar, exercise ballet bar, Portable ballet barre for home, balle barre equipment for home, balance bar workout, ballet exercise equipment, barre ballet workout, ballet barre portable for home.
  • NO, OUR BAR DOESN’T WOBBLE OR SLIDE! Wobbling is a common problem with ballet bars. The ballet bar wall mount is designed to with high tensile powder coated steel brackets and strong locking screws. Your ballet bar doesn’t wobble or slide while in use..
  • INCLUDES A TURNING BOARD WORTH $15 Perfect your pirouette and master your spinning techniques with a turning board that comes included. Spin and balance safely on this board made of high grade plastic with an anti....
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • 【PRODUCTS INCLUDE】 - Lathe tools including(1)10.7"handle (2) 7.9"wood turning tools including square,round,diamond,square arcs(3)easy to replace the head of the T15 wrench,all parts are made of special hard sponge full fitted wrap,in the box..
  • 【5 SECONDS QUICK DISASSEMBLY】 - No tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame c....
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MCLNR12 with 10pcs CNMG431 / CNMG120404 Indexable Carbide Turning Inserts

  • ★S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MCLNR12 boring bar + 10pcs CNMG431 carbide insert + 1pcs wrench.
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MTJNR16 with 10pcs TNMG331 / TNMG160404 Indexable Carbide Turning Inserts

  • ★S16Q-MTJLNR16 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★TNMG331 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MTJLNR16 boring bar + 10pcs TNMG331 carbide insert + 2pcs wrench.
Check Stock

Upgraded Carbide Tipped Woodturning Tools Set, 6 IN 1 Lathe Rougher/Finisher/Dovetail/Swan Neck Hollower Wood Turning Tools, with Interchangeable Aluminum Alloy Grip Extension Handle and Wrench

  • Material:Tool bar：CNC machined 304 stainless steel,increase the stability and shock resistance；Handle：Ergonomics design makes it more comfortable while doing turning job；Carbide cutter：Tungsten carbide of high quality.
  • Indexable Replacement carbide insert design:matched with Round Carbide Insert (12×2.5mm-30°),many usable sides give you fresh edge for maximum cutter lif.
  • Handle：solid wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Dimension: Tool Bar 8.27"(210mm) ，Head 2.36"(60mm)， Overall length 19.69"(500mm).
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • ...LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
  • Install the base plate on a stable concrete slab under the area you wish to support.
  • Use the mounting holes on top and bottom plates to bolt jack to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses with these adjustable floor jacks.
Check Stock

Globber Ultimum Scooter for Kids, Teens and Adults | 3 Wheel Scooter for Ages 5+ to Adult | Patented Folding System and Adjustable T-Bar | Perfect Outdoor Toy for Summer (Charcoal Grey)

  • INNOVATION | Patented steering angle control system modifies the turning radius of the front wheels. Turn the knob clockwise to decrease the turning radius (for small turns) and counter-clockwise to increase the turning radius (for big turns).
  • PATENTED FOLDING | Patented elliptic folding system. Simply push the button to put the 3-wheel scooter in trolley mode to easily transport.
  • ADJUSTABLE T-BAR | Anodized coloured column with a super wide, curved 6-height T-bar and easy-to-use clamp.
  • ROBUST DECK | Extra-wide composite deck in dual-colour with added anti-slip composite grips supports up to 220lbs.
  • HIGH-QUALITY WHEELS | High-rebound PU casted front & back wheels.
  • 2 x 125mm, 43mm wide front wheels, 1 x 90mm rear wheel mounted on ABEC 7 bearings.
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • ...LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, h....
Check Stock