Reviews Turbocharger Downpipe Gasket

Turbo Kit T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0 99+

  • Chevy Silverado / GMC Sierra LS Single T4 6466 Turbo Kit.
  • Hi Flow T4 cast passenger and oversized cast driver side manifold.
  • T4 T70 Trim Turbocharger Cast Passenger T4 Manifold Cast Driver High Flow Manifold Stainless Steel Crossover Stainless Steel 3" Downpipe w/ turndown....
Check Stock

Single Turbo Hotparts Kit Turbocharger Vortec V8 LS 4.8 5.3 6.0 Silverado Sierra

  • Brand New complete direct bolt on, turn-key single turbocharger kit with instructions..
  • Every detail has been thought out down to the vacuum lines, clamps, brackets, check valves, hardware, oiling system, and pcv system..
  • Easily installed by the average enthusiast on a weekend.
  • There is no custom intake or exhaust work needed aside of a downpipe and some models need maf wire extension..
Check Stock

EVIL ENERGY 3.0 Inch V Band Clamp for Flange Kit Stainless Steel

  • [Size] Fit for EVIL ENERGY 3.0inch Flange..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange..
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Dorman 667-203 Turbocharger for Select Buick / Chevrolet Models

  • Direct replacement - this turbocharger is built to match the performance of original equipment for specific vehicles.
  • Complete kit - comes with turbocharger and gasket kit for added convenience.
  • Thoroughly tested - part has undergone fit, performance and corrosion testing to ensure longevity and reliability.
  • Repair tip - also replace oil and coolant inlet and drain tubes (not included) to ensure turbo function.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Enrilior Subaru Downpipe 5 Bolt to v Band,TD04 5 Bolt Turbo Downpipe Flange to 3in V-Band Conversion Adaptor Fit Compatible with Subaru WRX 14412AA451

  • Made of high quality stainless steel material, high strength and toughness..
  • It has strong impact resistance and scratch resistance, and has both moisture and corrosion resistance..
  • This adapter flange converts the standard TD04 5 bolt turbine casing downpipe to a 3in V-band..
  • The outer 5 holes are used to bolt the flange and then convert the turbocharger exhaust to 3in..
  • Good sealing, which can eliminate leakage caused by poor welded joints..
Check Stock

X AUTOHAUX 2pcs Exhaust Manifold Downpipe Gasket for BMW 320i 1991-1997 18301716888

  • This exhaust gasket is made of material. It has great durability, is firm and not easy to crack..
  • The exhaust pads are flexible and can be reused. It does not require a sealant and the performance is good..
  • Fit for 1991-1997 for BMW 320i, 1995-1997 for BMW 323i 2.5L, 1991-1997 for BMW 325i, 1995-1997 for BMW 328i, 1990-1995 for BMW 520i 24V, 1990-1995 for....
  • Package Includes : 2 pcs Exhaust Downpipe Gasket.
Check Stock

Mounting Bungs and Plugs Stainless Steel M18 x 1.5 Thread Notched Style Exhaust Weld in Bung with Gaskets 2 Sets

  • The mounting bung is made of stainless steel, easy to weld on exhaust, headers, down pipes, etc..
  • Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • The bung cap can be used to seal sensor bungs that are not being used in the exhaust system. The gasket helps create a tight seal to prevent any....
  • The M18*1.5 bung features a notched style, making it easy to weld by having the curve sit against the rounded surface of the exhaust or downpipe..
  • The weld in bung and plug set features a straight thread size of M18*1.5 mm, which is suitable for most vehicles..
Check Stock

HENYEE GT45 T4 Turbo 4 Bolt V-Band 1.05 A/R 98mm 600+HPs Huge Boost Upgrade Turbocharger External Wastegate for 3.0L-6.0L Engine Turbo Charger Racing & Gaskets Black Finish

  • APPLICATION: Perfect for all 3.0L-6.0L engine, fit for Fit for Mazda CX-9 2007-2012 3.7L engine.
  • HORSE POWER: Boost Horse Power up to 600+ BHP.
  • Exhaust (Turbo Manifold) Flange: T4 4 Bolt Flange.
  • Exhaust (Downpipe) Flange: V-Band Flange.
  • Reliable Quality: Every turbocharger is individually tested and computer balanced to ensure reliability and consistency.
  • Accessories: You will get exactly as shown in the picture above.
Check Stock

BLACKHORSE-RACING Turbo Charger Oil Drain Return Line Oil Feed Complete Kit T3 T4 T04E T60 T61 T70 Silver

  • Will work with T3 T3 T04E T61 T601 T70 turbo.
  • Comes with 17" braided oil drain return line (comes with AN10(-10AN) fittings for return line kit,oil line covered with high quality woven Stainless steel for racing and aggressive look.).
  • Circulate oil to the oil pan (only for metal plates).
  • It helps to circulate oil from the turbocharger to the oil sump. The kit provides an anodized appearance that provides optimum cooling performance on a turbocharger for long life.And special designed inlet adapter limits oil flow ,effectively prevent blown oil seal caused by excessive oil pressure.
  • Comes with gasket,screws/washer,all fitting are made of high quality aluminum.No Instruction Included, Professional Installation is Recommended!.
Check Stock

Rubber Diverter to Fill a Rain Barrel from Your downspout (Diverter Only, 2x3)

  • Drill a 2 1/8″ hole – do not cut your downpipe – of the 3″ side of the downspipe.
  • This unit Can also be inserted into either a 3×4 or 2×3 downpipe.
  • Drill hole and squeeze into place. Then use the 2 provided screws to secure it.
  • If you have deep ridges in your downpipe water WILL leak out.
  • Best used for rain barrels under 100 gallon.
Check Stock

Diesel Power Plus Cummins Oil Engine Mesh Truckers Hat Historic Logo Cap Summer

  • Guaranteed Exact Fit for easy installation. CARB-approved and 50 state legal!.
  • Professionally remanufactured in the USA, guaranteed to function just like new and backed by a one year, unlimited mileage warranty.
  • This kit includes a remanufactured OEM Holset HE351VE variable-geometry turbocharger with pre-calibrated actuator, new gasket set and new oil feed line.
  • You might find cheaper turbochargers, but please compare carefully - make sure you know what you are getting. Do not settle for low quality parts. Do you really want to risk doing this job repeatedly?.
  • Fits all 2007-2012 Dodge Ram Cummins 6.7L Diesel.
Check Stock

Wind Deflector HandShield Handguard Handlebar Brush Bar Shroud Windshield Windscreen For 1290 Super ADVENTURE R/S/T 2017-2020

  • for 2014 Sprinter 3500 Base Extended Freight Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 3500 Base Standard Van 3-Door 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 3500 Basic Standard Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 3500 Base Cab & Suspension 2-Tuerer 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 3500 Base Cab & Chassis 2-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 3500 Base Extended Van 3-Door 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 2500 Base Standard Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 2500 Basic Standard Passenger Van 3-Tuerer 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 2500 Basic Standard Passenger 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 2500 Base Extended Freight Van 3-Tuerer 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 2500 Base Extended Freight Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 2500 Basic Standard Van 3-Door 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2013 Sprinter 2500 Base Standard Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2013 Sprinter 2500 Base Standard Passenger Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
Check Stock