Reviews Tungsten Carbide Head Burrs

S&F STEAD & FAST Carbide Burr with ¼” Shank ½” Cutter Dia 1” Length, Professional Grade Tungsten File, Die Grinder Bit for Electric or Air Die Grinder, Cylinder End Cut, Grinding Burr bit for Metals

  • CNC machined cutting burrs rotary file bit made with heat-treated tungsten carbide with HRA hardness 003e 90, hard enough to handle metals including steels, copper, cast irons and nickel alloys. Performs better than HSS burrs, especially at high temperatures..
  • Grinder burr bits with shank diameter 1/4”, head diameter ½” / 12.7mm, head length 1” / 25mm, total length 2 ¾” / 70mm.
  • Tungsten carbide bit - Cylinder end cut shaped tungsten grinder head to be used with electric, air / pneumatic rotary tools at maximum rotation speed of 35000 rpm.
  • Popular metal burr double cut surface for better control of the carbide bit and for fast stock removal.
  • Carbide bur - Use for cutting / shaping / deburring metals, grinding welds and cylinder head porting.
Check Stock

SL-3 Tungsten Carbide Burr Rotary File Taper Shape with Radius End Double Cut with 1/4\Shank for Die Grinder Drill Bit

  • 【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....
Check Stock

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • 【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....
Check Stock

Benchmark Abrasives Cylindrical Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SA-5

  • Benchmark Abrasives SA-5 cylinder shape burrs are great for interior contour work and deburring. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs tend to be used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Flame Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SH-5

  • Benchmark Abrasives SH-5 flame shape burrs are great for interior contour work and rounded edge processing. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

TEMO SF-5L6 NF Aluminum Cut Carbide Rotary Burr File 1/2 Inch Head Round Tree 1/4 Inch Diameter 6 Inch Long Shank

  • These carbide burrs are designed to grind and shape aluminum and other non-ferrous metals. They are used in electric, pneumatic, and hydraulic die grinder. These burrs are essentially electric files which can grind in tight spaces with precision focus. Used by mechanics, machinists, tradesman, and hobbyists..
  • Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading..
  • Made with tungsten carbide and suitable for deburring and polishing..
  • Extra long 6" shank. Aluminum cut head and meet US standard with 1/4" (6.35mm) shank,1/2" (12.7mm) head diameter, 1" (25.4mm) cut length, and 7" total length. | SF-5L6 Round Nose Tree Head Shape.
  • Individually packaged with a protective plastic tube..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Benchmark Abrasives Oval/Egg Shape Premium Shape Double Cut Rotary Tungsten Carbide Burr for Metal Wood Welding Deburring High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SE-5

  • Benchmark Abrasives SE-5 oval/egg shape burrs are great for contouring and rounded edge processing. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Inverted Cone Shape Double Cut Rotary Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SN-4

  • Benchmark Abrasives SN-4 inverted cone burrs are great for rear-side chamfering, edge milling, and machining on hard-to-reach areas. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Pointed Cone Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SM-3

  • Benchmark Abrasives SM-3 cone burrs are great for narrow contours, surface machining, and getting at rounded edge and surface processing in small places. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Pointed Cone Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SM-5

  • Benchmark Abrasives SM-5 pointed cone burrs are great for narrow contours, surface machining, and getting at rounded edge and surface processing in small places. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

TJATSE 5Pcs 1/4 Inch Aluma Cut Carbide Burr Set 4.4 Long Shank Single Cut Tungsten Rotary Burr Files CNC Engraving Cut Metal Carving Polishing Drilling Tool Kits

  • ...num will just gum it up, heat it up, and end up pissing you off..
  • 【EXTENDED LONG SHANK】: In the grinding process, the special extension long handle design is great for hard to reach areas of porting and reduced operator fatigue due to high performance applications..
  • 【ADVANCES TUNSTEN MATERIAL】:100% raw virgin tungsten carbide burrs that the service life is very long, 10 times higher than the durability of other HSS cutter and 200 times more than the small wheel durability. Hardness can reach to HRC70, sharp and sturdy..
  • 【TJATSE BRAND WARRANTY】: Packed with an great tool carry case for safety storage and protection. TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..
Check Stock

Carbide Burrs Set 4pcs JESTUOUS 1/4 Inch Shank Diameter Aluminum Rotary Files Single Cutting Edge for Die Grinder Drilling Bits Metal Carving Engraving

  • Suitable for cutting aluminum , non-ferrous materials..
  • Carbide rotary burrs are made of solid tungsten carbide,sharp and durable..
  • Single cutting with 1/4 inch shank diameter..
  • Include 4 head types burrs:SA-3NF,SC-3NF,SD-3NF,SF-3NF..
Check Stock

ATOPLEE Rotary Burr Set,10pcs 1/8 Inch Shank Double Cut Carbide Tungsten Steel Cutting Burrs Set for Woodworking Drilling,Carving Engraving

  • 【SIZE】 Shaft diameter: 1/8 inch(3mm).
  • 【SPEED】 The speed is generally 6000-30000 rpm.Too high speed may bend the shaft ..
  • 【DESIGN】Material:Tungsten Carbide.The double-line design of the cutter head makes the cutter head more sharp and wear-resistant, with high....
  • 【USED】Tungsten steel grinding head is widely used in industrial sectors such as machinery, aviation, automobile, shipbuilding, chemical....
  • 【INCLUDED】10pcs Tungsten steel Burrs in a storage box..
Check Stock