Reviews Tubular Positive Plate

Starrett - 99210-07-09 Versatix MP Band Saw Blade, Bimetal, Versatix Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 6-10 TPI

  • Bimetal blade is designed for cutting structural steel.
  • Good for cuts in structural and tubular shapes and tubular bundles.
  • Versatix tooth design dissipates stress for less tooth breakage and longer blade life.
  • Positive rake angle for intermittent cutting.
  • Raker set helps clear chips for reduced clogging.
Check Stock

Starrett-99206-07-09 Intenss Pro Band Saw Blade, Bimetal, Intenss Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 6-10 TPI

  • Bimetal blade is designed for cutting low alloy steel.
  • Good for cuts in solid, structural, and tubular shapes, and solid and tubular bundles.
  • Variable tooth pitch reduces noise levels and vibration.
  • Intenss tooth design with positive rake angle for high-production cutting operations.
  • Raker set helps clear chips for reduced clogging.
Check Stock

KING BIRD Folding 60\ x 24\ x 14\ Hitch Mount Cargo Carrier Fits 2\ Receiver, 500 Lbs Capacity Cargo Basket with License Plate Device, Hitch Stabilizer and Ratchet Straps

  • 【500 Lbs Capacity】KING BIRD trailer hitch cargo carrier is constructed from heavy-duty tubular steel to promote high strength and a lightweight design, and anti-rust treatment on the surface with carbide black powder coat for long-lasting corrosion resistance, can haul 500 Lbs of cargo, gear, or equipment..
  • 【14" Tall Fence】Upgraded luggage basket size up to 60"x24"x14".The 14" raised tubular side rails to make sure cargo do not jolt or slide randomly, side rails can be pulled out for easy loading and unloading..
  • 【Rising Shank Desgin】 This cargo carrier is equipped with a folding, angled shank. When use, the angled shank provides additional ground clearance. And allows folding when not in use..
  • 【License Plate Device】✅Just remove the license plate from the car and install it on the KING BIRD cargo carrier, you can keep the license plate always displayed, no longer worry about the cargo covering the license plate..
  • 【Lifetime Warranty】Includes two sets of rainproof ratchet straps for Secure cargo in basket, and a hitch stabilizer for added security for your trailer hitch great vehicle cargo baskets. Customer satisfaction is our greatest pursuit, for any problem, we will provide timely and effective help and Lifetime parts replacement se....
Check Stock

For YAMAHA MT-07 Tracer/MT-09/FZ-09/ MT-10 License Plate Holder Rear Tail Tidy Fender Eliminator Kit & LED Turn Signal

  • High Quality lightweight fender eliminator,Material:3MM Aluminum plate,CNC maching.
  • Include the LED light,Surface finish:Aluminum plate- Anodized surface protective layer.
  • includes indicator mounting position. -This lightweight aluminum bracket easily mounts a standard size number plate.....
  • LED Turn Signals Light-Brand New ,Super Bright Material: High Quality ABS plastic Voltage: 12V LED Quantity:12 LED.
  • Double sided LED Light,Color:Amber/White Connect:3 Wires (Black:Negative；Red:Positive，Amber light.
  • Blue:Positive,White Light,you can use for brake....
Check Stock

GIVI E251 Monokey Plate

  • Monokey plate for bikes with a standard flat tubular luggage rack.
  • Works with all Givi Monokey Top Cases - cases sold separately.
  • Includes plastic honeycomb plate, hardware and cover.
Check Stock

Hooke Road for Jeep Wrangler YJ 1987-1995 Front Fender Flares Tube Armor Rocker Guards (Textured Black Steel)

  • (A pair)Tubular Steel Front Fender Flares Compatible with Jeep Wrangler YJ 1987 1988 1989 1990 1991 1992 1993 1994 1995.
  • Difficult installation requires cutting and drilling. Professional installation is recommended.
  • Enhances rugged appearance. Tubular design for maximum strength. Decorated with a plate of steel mesh includes densely square-holes.
  • Protects your YJ from mud, debris, collisions, and other trail hazards.
  • Increases tire clearance for optimal suspension articulation.
Check Stock

Universal Seat Mounting Frame Slider and Mounts

  • Complete kit includes everything to install one bucket seat into most early cars and trucks with flat floors.
  • Seat mount kit with sliders has an assembled height of 7 inches.
  • Dual locking ball bearing seat sliders provide 7 inches of smooth seat adjustment and positive retention.
  • Tubular steel seat mounting frame works well on flat floors but will require modification to fit a contoured floor.
  • Fully assembled the kit measures 15-1/2-inches wide by 17-1/2-inches long.
Check Stock

Westbrass Tubular 35 in. Cable Drive Bath Waste, Powder Coat White, D50P35TLE-50

  • 1-1/2 in. tubular cable driven bath waste.
  • Low profile top elbow with handle mounting back plate.
  • Trim includes brass handle, large European style pop-up stopper, and strainer plate (D50TE).
  • Turn handle to open and close drain stopper.
Check Stock

Kwikset 82247-15A Adjustable Radius Deadlatch Antique Nickel Finish

  • DURABLE MATERIAL - This rectangular reversible doorknob privacy latch set is manufactured of superior quality brass and stainless material. Polished and Lacquered brass finish doubles its life..
  • DIMENSIONS - Total latch length = 3 Inches, Backset = 2.38 Inches, Plate Height = 2.25 Inches, Mounting screws - Included..
  • PACK INCLUDES - Reversible door knob latch set includes stainless steel tubular latch, backset, Striker, Forend, Case, Optional plastic door jam insert, Privacy pin and Brass mounting screws..
  • EASY INSTALL - The brass faceplate fits over the reversible latch and works fine with both left and right opening doors. It accepts a 1/4 Inch long square shape spindle bar, not included. Given mounting screws helps in a hassle-free installation..
  • BUY WITH CONFIDENCE -The tubular door knob latch is carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check Stock

Tri-Arc KDHD106246 6-Step Heavy-Duty Steel Rolling Industrial & Warehouse Ladder with Perforated Tread

  • 1-1/16-inch tubular steel construction with powder coat gray finish.
  • 4-inch swivel casters and 5-inch rigid casters.
  • 24-inch wide step & 10-inch deep top platform.
  • 60-inch platform height & 96-inch overall height.
  • Step-Lock positive locking system engages when the user steps on the first step.
Check Stock

The ROP Shop | Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft Axle

  • The ROP Shop replacement Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft, Axle.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

Battery Terminal Connectors Top Post Battery Terminal Ends, Copper Plate, Positive and Negative, Applicated in Car, Boat, Van, and More

  • 3 Way Positive Negative Battery Terminals with Material: Pure Copper Plate &Plastic. Being able to isolate the connections is a great feature.
  • Positive Battery Terminal Hole Dia.:0.71inch (18mm). Negative Battery Terminal Hole Dia.: 0.67inch (17mm)..
  • The Battery Cable End is suitable for 6/12 volt positive or negative battery plates..
  • Use area:-Battery terminal connectors for cars, trucks, caravans, RVs, truck batteries, etc..
  • 2 colors of Battery Terminals to distinguish the positive and negative connectors, Black, Red.
Check Stock

Tri-Arc KDHS107246 7-Step Heavy-Duty Safety Angle Steel Rolling Industrial & Warehouse Ladder with Perforated Tread

  • 1-1/16-inch tubular steel construction with powder coat gray finish.
  • 24-inch wide step & 17-inch deep top platform.
  • Step-Lock positive locking system engages when the user steps on the first step.
  • Safety angle allows for face forward descent.
Check Stock