Reviews Tube Butt Welding Machine

Manual Pipe Welder HDPE Butt Fusion Welding Machine Electric Tube Butt Fusion Equipment Hot Melt Solder Welder for 2.48"-7.87" PE PP PB PVDF HDPE PVC Pipes and Fittings

  • 【Application】The welder is suitable for PE PP PB PVDF PPR plastic pipe hot-melt butt welding. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory..
  • 【Welding Size】Welding level (outer dia) is 63mm(2.48”)、75mm(2.95")、90 mm (3.54”)、110 mm (4.33”)、125 mm (4.92”)、140 mm (5.51”)、160 mm (6.30”)、180 mm (7.09”)、200mm(7.87”)..
  • 【Fast Heating Speed】Thick high-quality layer paint, uniform heat conduction, rapid heating of the tube, high work efficiency..
  • 【Stable Performance】The heating plate adopts independent temperature control system and imports large gold paint surface coating, which has good invisibility and stability..
  • 【Adjustable Temperature】Accurate scale temperature adjustment 0-280℃ Manual adjustment and lasting constant temperature..
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • 【WIDE APPLIACTION】Manually Operated HDPE butt fusion welding machine is suitable for PE and PP pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory.
  • 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single ....
Check Stock

5pcs 0.1mm x 200mm x 250mm 99.5% Graphite Flexible Foil Gasket Sheet

  • Use for metallurgy, machinery, electronics, chemicals, light industry, aerospace and refractory..
  • High-purity graphite has small resistance coefficient, high temperature, corrosion, oxidation resistance, thermal shock resistance, electrical conductivity, thermal expansion coefficient is small, self-lubricating, easy precision machining etc..
  • Graphite electrodes, carbon rod for spot welding machine, carbon rod machine, butt welding machine..
  • For graphite crucible, smelting furnace, electrical appliances' gold silver point and copper pieces and other metal parts welding effect, ideal tools material..
Check Stock

Forney 31610 E6010 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
  • Note : In order for this product to work correctly you must have the appropriate machine with the appropriate OCV and the correct technique.
Check Stock

ECUTEE Vacuum Therapy Machine Machine with 35 Buttock Cups Multifunctional Cupping Scraping Body Shape Massager for Breast Enhancement Hip Lift Joint Pain Relief

  • 【Get Plump Buttocks】Our vacuum therapy machine has enough suction and you can also adjust the suction according to your needs. If you want to make your butt bigger, try our vacuum cupping machine..
  • 【Multifunctional Chose】The butt vacuum machine with buttock cups can be used not only for butt lifting, but also for scraping, cupping massage and facial massage. Different sizes and shapes cups correspond to different functions..
  • 【Get Perfect Figure】The vacuum therapy machine can applied for scrub, point percussion therapy, treat cellulites, improve buttocks to realize perfect body contour..
  • 【Save Time and Money】Our hip lift machine is the same as the one in the beauty salon, you can get the perfect figure at home, save a lot of time and money, and it doesn't take up a lot of space when you're not using the machine..
  • 【Test the Suction】Turn on the switch button and increase the suction strength, then block the air pressure hole with your fingers, and observe the gauge. (The loose connection between the tube and the cups or between the tube and the machine may cause suction does not work)..
Check Stock

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
  • The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
  • Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
  • A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

HVDI Stainless Steel Gas Can, Safety Portable Emergency Gasoline Diesel Can Tank, Backup Thickened Tight Sealed Gas Tank with 3 Handles, Vent and Flexible Spout Kit for Vehicles, Cars, Trucks(5Gallon)

  • ...gh-quality Stainless Steel】The gas can is made of high-quality 304 stainless steel with a thickness of 0.9mm. It is resistant to pressure, high temperature, corrosion, and will never rust. Compared with plastic, stainless steel gasoline tanks are not prone to static electricity, and are safer..
  • ✔【Seamless Butt Welding】The gear-shaped stainless steel cover is equipped with a sealing ring to ensure high sealing performance. The tank body adopts seamless butt welding to make it stronger and never leaks..
  • ✔【Portable Flexible Spout Kit】The built-in filter effectively removes impurities, and you can choose either built-in or external oil guide tube, so you don’t have to worry about losing it..
  • ✔【Humanized Design】The gas tank has 3 handles, which support two people to lift. the stainless steel air release valve can balance the internal and external air pressure, and the oil outlet is expanded to 5cm for quick oil output..
  • ✔【Wide Use and Worry-Free Vouchsafing】This gasoline tank is suitable for various liquids such as gasoline, diesel, gasoline, water, etc. If you want higher quality, easier and more comfortable products, please choose us. Customer Satisfaction is our top priority. Please contact us if you need any assistance..
Check Stock

Mophorn Tig Cooler 10L Tig Water Cooler 110V Water Cooled Tig Torch 350A Tig Torch Water Cooler TIG MIG Welder Torch Water Cooling System

  • 【GREAT PERFORMANCE】- This cooling tank is designed for use with TIG welders to provide powerful cooling. It features 1500W high power and two brass ports, which make it more durable..
  • Powerful Water Pump: Large lift pump will not cause scale due to long-term use.
  • fast heat dissipation, with 1500W rated cooling capacity, it is more durable and powerful..
  • Water Level Display: Keep you abreast of the water level and the water tank is large enough. In the absence of water supply pipes in the wild, it can meet the needs of different argon arc welding machines..
  • Copper Condensing Tube: The copper tube cooling system combined with the powerful fan keeps the water at normal temperature for better heat dissipation. It is corrosion-resistant and anti-aging..
  • Wide Application: Widely used in high-power argon arc welding machine torch cooling, plasma cutting machine torch cooling industrial welding equipment supporting the use..
Check Stock

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

ANDELI Cold Welding Machine 110V/220V TIG-250MPL TIG Welder MOS Tube Multifunctional With Hot/Cold/TIG Pulse Cold TIG Welding Machine

  • 【Multifunctional tig welder】MOS Tube Multifunctional With Hot/Cold/TIG Pulse Cold TIG Welding Machine,the welding speed is fast, the welding....
  • 【Cold welder】The core cold welding technology,exquisite weld bead, the welding point temperature is low, the deformation is small, the color of....
  • 【Delivery Package】110/220V TIG-250MPL, ground clamp 2m, COLD torch WP-9F 4m, TIG torch WP-17F 4m, gas pipe 3m, nozzle*20, collet*20, house....
  • 【Intelligent adjustment】Screen Digital intelligent display,storage store the welding parameters,parameter capable for adjustment when welding.
  • 【Applicable Material】Ordinary thin steel, carbon steel, stainless steel, iron and etc. Suitable for homehold DIY and general maintenance work..
Check Stock