Reviews Tsudo J Pipe

Tube Talon J-Hook for 1/2\ PEX Tubing Pipe Support 100 pcs

  • Easy to use for contractors and homeowners.
  • Holds Pex, Copper, CPVC & Polybutylene to floor joists or rafters.
Check Stock

J-Bar Roof Rack Kayak Carrier Holder Boat Canoe Surf Ski Snowboard Holder Mounted on Top Crossbar SUV Truck 2 Pairs Steel

  • The J-Bar Rack can be used to transport all kinds of water sports equipment, such as kayaks, canoes, surfboards, snowboards, windsurfing boards and various small sailboats..
  • The rack is made of steel pipe with a thickness of about 1.5mm. 8" long straps with 4 in total to support outdoor gear such as kayaks that are 36" wide and 75 lbs. Finished with a premium glossy gloss black paint finish that will stand up to harsh weather and harsh environments..
  • Remember that crossbars thicker than 1" or wider than 2.5" will not fit. It will fit most OEM factory and aftermarket installed crossbars such as oval, square and flat, except round rails (OEM rails are within 2.5" wide and 1" thick)..
  • You will receive 2 sets of brackets and required mounting accessories, instructions included. Through the splicing of the reduced diameter pipe and other pipes, and the use of pre-drilled holes on the pipe body, it is more firm and reliable after installation..
Check Stock

FiberWeld Pipe Repair Cast 2x48 Inch – High Strength Adhesive Fiberglass Wrap – White

  • J-B Weld FiberWeld 1” Pipe Repair Cast: A high-strength one-time use fiberglass wrap, impregnated with a specially formulated anti-corrosive resin providing a permanent & protective adhesion to a wide variety of pipes. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. All you have to do is wet, apply and let it dry and in 15 minutes it hardens like steel!.
  • Cure and Set Time: Once the product is dipped in water for 5-7 seconds, you will have between 5-10 minutes to work with the product and then it will fully cure in 15 minutes!.
  • Product Features and Strength: J-B Weld FiberWeld 1” Pipe Repair Cast can withstand household water pressure and has a bend strength of 1800 PSI. Once the product is fully cured, it can be sanded and painted! The kit includes a pair of gloves, an epoxy putty stick and a securing bandage!.
  • Great For Repairs On: Copper, Cast Iron, PVC, ABS, Galvanized Steel, Rubber and more!.
Check Stock

TSIN 120PCS Half-clamp J-hook black with nails, for Pex Tubing pipes support 1/2 inch 3/4 inch, wire and cable fixing

  • Package: You will receive 120pcs black half-clamp J-hooks with nails, 60pcs 1/2-inch half-clamp J-hooks and 60pcs 3/4-inch half-clamp J-hooks, complete specifications and sufficient quantity You use..
  • Material: This half-clamped J-hook is made of thick environmentally friendly plastic material, which is durable and not easy to age. It uses high-performance steel nails with high hardness. It is a perfect tool for fixing pex pipes, wires and cable pipes..
  • How to use: The installation is very simple, fix the pex tube or cable, take out the half-clamp J-hook, and use the clamp to fix the wire or PEX tube to tap the steel nail to complete the installation..
  • Widely used: suitable for cement walls, brick walls, concrete walls, wires, cables, plastic pipes and other products that need to be fixed.
  • Multi-function: It is convenient to use, strong fastening force, it is not easy to fall off after the PEX pipe wire and cable duct is stuck, and it also avoids wire entanglement. It is an ideal solution for wiring and fixing PEX pipes..
Check Stock

Eaton Aeroquip 2021-12-16S Male Connector Male 37 Degree JIC Male Pipe Thread JIC 37 Degree & NPT End Types Carbon Steel 1 JIC m x 3/4 NPT m End Size 1 Tube OD

  • Male National Pipe Thread (NPT) connector to connect a tube to an NPT female thread.
  • Male NPT threads on both ends for connecting two threaded pipes.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

Litorange 55 PCS Black Half Clamp J-Hook with Nail For 3/4\ PEX Tubing Pipe Support

  • ★ Half clamp hanger design help clamp tubing for fast, easy installation and secure.Greatly reduces the chances for noise..
  • ★ 3/4" J-Hook pipe hanger for PEX tubing supporting supply and return piping..
  • ★ Tube Talons(J-Clamp) are used to attach such pipes as PEX, Copper and CPVC to wooden surfaces (studs, joists, plywood, subfloor, etc.)..
  • ★ Durable plastic construction to create the best piping support.Easy to use for contractors and homeowners..
Check Stock

Eaton Aeroquip 2024-2-4S 90 Degree Male Elbow JIC 37 Degree & NPT End Types Carbon Steel 1/4 JIC m x 1/8 NPT m End Size 1/4 Tube OD 1/8 Male Pipe Size Pack of 4

  • 90-degree male Joint Industry Council (JIC) elbow to connect to an National Pipe Thread (NPT) female thread at a 90-degree angle.
  • Male JIC threads on one end and male NPT threads on the other end for connecting two different threaded ends.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

J-B Weld MufflerSeal Muffler Cement Plastic Tube 12 oz., Model Number: 37912

  • J-B Weld Muffler Seal: MufflerSeal is an iron reinforced paste designed to seal mufflers, pipe joints and exhaust systems. MufflerSeal can resists up to 700 F..
  • Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time may vary based on cold or humid work environments) or MufflerSeal can be cured through heat application. You will be able to tell when the product is cured once it is hard..
  • Projects: Mufflers, Pipe Joints and Exhaust Systems..
Check Stock

Eaton Aeroquip 2021-8-10S Male Connector Male 37 Degree JIC Male Pipe Thread JIC 37 Degree & NPT End Types Carbon Steel 1/2 NPT m x 5/8 JIC m End Size 5/8 Tube OD Pack of 4

  • Male National Pipe Thread (NPT) connector to connect a tube to a Joint Industry Council (JIC) female thread.
  • Male NPT threads on one end and male JIC threads on the other end for connecting two different threaded ends.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

Eaton Aeroquip 2242-12-12S Female 37 Degree JIC Swivel to Female Pipe JIC 37 Degree & NPT End Types Carbon Steel 3/4 JIC f x 3/4 NPT f End Size 3/4 Tube OD 3/4 Female Pipe Size

  • Female Joint Industry Council (JIC) swiveling connector to connect to a National Pipe Thread (NPT) female thread.
  • Female JIC threads on one end and female NPT threads on the other end for connecting two different threaded ends.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

Motorcycle Hot Pad Leg Heat Shield High Temperature Touchable Exhaust Cover Insulation Protector Universal Fit Muffler Guard Silicone Ceramic for Harley Suzuki Kawasaki Yamaha Honda MHP156

  • I cannot respond to 1-star feedback even if J didn't follow the instructions. Please purchase this product and provide feedback. Money back guarantee!!.
  • Wide Application – This Motorcycle Hot Pad can be installed on any motorcycle with shiny Chrome or Satin Black exhaust pipe shield that comes standard on many motorcycles to hide discolored exhaust pipes. It also can be installed onto a motorcycle muffler. It is NOT designed to be installed directly onto the exhaust pipe or exhaust pipe wrap..
  • High Heat – This Motorcycle Hot Pad is made of a specially-designed silicone polymer with a patented ceramic coating that can withstand exhaust temperatures and still be safe to touch when installed properly..
  • Easy Installation – This Motorcycle Hot Pad is quick and easy to install. It comes as a complete kit. Just wrap the straps around the cool exhaust pipe with shield, tighten, and tuck or cut the remaining strap..
  • Safety – This Motorcycle Hot Pad will prevent burn injury from momentarily touching the protected area with hand, leg, boot, or clothing..
Check Stock

Later Skater Tee

  • Later Skater novelty t-shirt is a funny gift for skate lovers, lovers of skate lovers and skater friends for their birthday, freestyling, mothers day, urban surfing, hitting the pipe, skater events, party present, or for absolutely no reason at all..
  • Need a funny vintage skater shirt for your self, son, daughter, brother, sister, husband, wife, mom or dad, then you will like J-Van apparel Later Skater tee..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

100 Pieces Half Clamps J-Hook with Nail, Black, for Pex Tubing Pipe Support (1/2 Inch, 3/4 Inch)

  • Material: the half clamps j-hook are made of PE plastic, sturdy and durable, can be applied for a long time.
  • Universal size: you will receiver 50 piece 1/2 inch clamps and 50 pieces 3/4 inch clamps, different sizes can meet different needs, and the quantity is enough.
  • Save your energy: durable and stable plastic construction can create a better piping support effect.
  • High-carbon steel nails have a high hardness, so that they do not bend or damage easily upon impact.
  • Pointed spike can easily fit through walls.
  • Application: tube talons (J-clamp) can be applied to attach pipes, like PEX, copper, to wooden surfaces, such as studs, joists, plywood, subfloor, and more.
  • Easy to use: half clamp hanger design makes supporting and removing pipe faster and more easily, half clamp can effectively reduce noise.
Check Stock