Reviews Truss Head

350 pcs #8×5/8 Phillips Truss Head Wood Screws Stainless Steel 410 Quick Metal Self Tapping

• ...tant, rust proof, high strength, no deformation, can be used for a long time, while the material is environmentally friendly, non-toxic, non-polluting, twice as hard as copper, and will not be easily stripped by the screw gun,410 stainless steel a new type of stainless steel is magnetically absorbent.
• Multi-purpose: Truss head screws are mainly used in home appliances, furniture and many woodworking and DIY work, furniture and cabinet industry, because it has good holding power, suitable for non-metal or soft metal, no mounting holes, directly screwed into the product with truss head screws, no nut fit. Can achieve the effect of connection tightening.
• Good holding power: Deep thread design of Truss head tapping screws, strong and durable, can provide good holding power in different materials, to achieve the effect of connection and fastening.
• Package Quantity: We have checked all the truss head screws, the quantity you receive after purchase will not be insufficient, and we will give you an extra cross drill tail for each box of truss head screws to meet your needs when using these screws.
• Workmanship: Using high-precision cutting technology, the threads are very precise, clean and sharp, deep and clear threads can easily penetrate wood and plastic, to e....

Wensilon（300pcs）#8×3/4”for Sheet Metal Self-Tapping Screws 410 Stainless Steel Truss Head High-Strength Quick Tapping Screws

• ...eformation, Can Be Used For A Long Time, While The Material Is Environmentally Friendly, Non-Toxic, Non-Polluting, Twice As Hard As Copper, Will Not Be Easily Stripped By The Screw Gun, 410 Stainless Steel Is A New Type Of Magnetic-Absorbing Stainless Steel.
• MULTI-PURPOSE: Truss Head Sheet Metal Self-Tapping Nails Are Mainly Used In A Wide Range Of General Industry, Because It Has Good Holding Power, For Non-Metallic Or Soft Metal, No Installation Holes, Directly Screwed Into The Product With Truss Head Screws, No Nuts With. Can Achieve The Effect Of Connection Tightening.
• GOOD HOLDING POWER: The Deep Thread Design Of Truss Head Self-Tapping Nail Is Strong And Durable, It Can Provide Good Holding Force In Different Materials To Achieve The Effect Of Connection Tightening.
• PACKAGE QUANTITY: We Check All The Truss Head Screws, You Will Not Receive Insufficient Quantity After Purchase, And We Will Give You An Extra Cross-Drilled Tail For Each Box Of Truss Head Screws To Meet Your Needs When Using These Screws.
• FINE WORKMANSHIP: Using High-Precision Cutting Technology, The Threads Are ....

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

• Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
• ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
• REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
• it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....

MIECOO 17PCS Guitar Truss Rod Allen Wrench Set, Includes 7mm & 8mm Truss Rod Hex Box Wrenches and 4mm, 5mm, 6mm Lengthened Ball End Truss Rod Wrenches Repair Tool and Guitar Spanner Wrench

• 【GUITAR REPAIR TOOL KIT INCLUDES】9 x Black Allen Wrench.
• 2 x Black Ball End Truss Rod Wrench (4mm & 5mm).
• 3 x Silver Lengthened Hex Wrench (4mm & 5mm & 6mm).
• 2 x Silver Pocket Truss Rod Hex Box Wrench (7mm & 8mm).
• 1 x Portable Storage Bag. Suitable for guitar, bass, mandolin, banjo and more. Perfect gift idea for guitar lovers, beginners, luthiers..
• 【7MM & 8MM SILVER POCKET TRUSS ROD HEX BOX WRENCHES】made of high quality steel & durable. Fine workmanship, smooth surface with high glossiness. 7mm pocket truss rod hex box wrench fits for Taylor Guitar, and 8mm wrench fits for Gibson Guitar. Long handle length allows easier access to truss rod cavity and easily tighten or loosen the truss rod of your guitar..
• 【3PCS SILVER LENGTHENED WRENCHES】set of 3 including different size: 4.0mm, 5.0mm, 6.0mm. Reach deep areas easily by using the ball end and apply higher force effortlessly by using the short end. Used to drive bolts and screws with a hexagonal head. Use for locking hexagonal screws, adjusting guitar neck truss rod efficiently, etc..
• 【GUITAR MULTI SPANNER WRENCH】made of stainless steel & durable. Used to tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup sw....

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

• Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
• ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
• REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
• it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

• Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
• ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
• REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
• it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....

Hard-to-Find Fastener 014973284466 Truss Nail Drive Anchors, 1/4 x 1-1/2, Piece-1500

#8 x 1/2 Stainless Truss Head Phillips Wood Screw 100pc 18-8 304 Stainless Steel Screws by Bolt Dropper

• 【High Quality Stainless】These Truss Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other hardware on the market today..
• 【Screws That You Can Depend On】Our Truss Head Wood Screws are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance..
• 【Great To Keep Around】Bolt Dropper stainless hardware is great to have around for use in wood and wet environments. Bolt Dropper stainless steel screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
• 【Dimensions】Diameter: #8 | Length: 1/2" | Thread Type: Coarse (standard) | Head: Truss | Drive: Phillips #2 | Quantity: 100 pcs | Material: 18-8 (304) Stainless Steel..
• 【Lifetime Guarantee】We are so confident that our stainless steel screw products are the best on the market that we offer a No Hassle Lifetime Guarantee..

(300) Mushroom Head 3/16 x 7/8 Hammer Drive Pin Anchors Nail-in Hammer-in Rivet

J.W. Winco 10NB73/E GN75 Steel Push-Pull Knob

• Finished in Matte Black/Champagne Bronze.
• Intricately crafted with precise detail for lifelong beauty and durability.
• Includes mounting hardware: #8-32 x 1 in. Truss Head Machine Screw & #8-32 x 1-1/2 in. Truss Head Machine Screw.
• Complete with Amerock Guardian Lifetime Guarantee against defect in material and workmanship.

Stainless 8-32 x 1/2\ (3/8\ to 3\ Lengths Available) Pan Head Machine Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Machine Thread (100 pcs, 8-32 x 1/2)

• [♣] Product Name: M4 Truss Phillips Head Screws.
• [♣] Package: 100pcs x Truss Head Phillips Screws.
• [♣] Usually used for fasterning pulls knobs..
• [♣] Sizes: M4x6mm/ 8mm/ 12mm/ 14mm/ 16mm.

Allison by Amerock Riva Cabinet Knob | 2-1/2 in (64 mm) Length | Polished Nickel | 5 Pack

• Intricately crafted with precise detail for lifelong beauty and durability.
• Includes mounting hardware: 8-32 x 1 in. Truss Head Machine Screw 8-32 x 1-1/2 in. Truss Head Machine Screw.

J.W. Winco 8NKC2S GN676.5 Stainless Steel Push-Pull Knob

• Intricately crafted with precise detail for lifelong beauty and durability.
• Includes mounting hardware: #8-32 x 1 in. Truss Head Machine Screw & #8-32 x 1-1/2 in. Truss Head Machine Screw.
• Complete with Amerock Guardian Lifetime Guarantee against defect in material and workmanship.