Reviews Trunnion Mounted Ball Valves

2 PCS Stainless Steel Ball Valves TWOZOZO Ball Valve Standard 60 Degree Female NPT Ball Valve with Raw Material Belts 1 Ball Valves

  • High Quality: TWOZOZO Stainless Steel Ball Valves Are Made Of High Quality Materials And Have Good Ductility To Effectively Avoid Cracking..
  • US Standard Threads: This Ball Valve Uses NPT 60 Degree Us Standard Threads, Please Fit Your Thread Diameter When Purchasing..
  • Wide Applications - Ball valves are widely used in mechanical equipment, industrial equipment, water supply and drainage equipment, for example in....
  • Easy To Use: Our Ball Valves Come With A Roll Of Raw Material, So You Don't Have To Re-purchase Them And You Can Install Our Ball Valves As Soon As....
  • High Performance - The internal passage of the drain tap is straight for optimum and complete passage and therefore has a low flow resistance. The....
Check Stock

SUNEX 66037 3.5T FLOOR JACK STEEL RAPID RISE

  • Rapid Rise Technology with dual pump pistons raises the saddle to maximum height in only six pump strokes..
  • Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and over extension of the ram..
  • Strong chassis with upper and lower frame flanges to withstand twisting..
  • Wide front wheels and ball bearing mounted rear caster wheels for stability and easy maneuverability..
  • Angular positioned pump pistons provide maximum effective pump stroke when jack is completely under a vehicle..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

OTC HDJ5P Air / Hydraulic Service Jack - 5 Ton

  • Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts.
  • Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty.
  • Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.
Check Stock

JET JWBS-15 15-Inch Woodworking Bandsaw 1-3/4HP 1Ph 115/230V 714600

  • Toolless Adjustments: Independently adjustable, upper and lower ball bearing guides.
  • Optimum Blade Support: Rigid, four-sided guide post with rack and pinion adjustment.
  • Three Heavy-Duty Tensioning Settings: Full tension, partial tension, and full release.
  • Maximum Support and Stability: Cast iron trunnion and precision-ground cast iron table.
  • Smooth and Easy Adjusments: Cast iron handwheels and ergonomically-designed knobs.
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

ENGWE Bike Pump with Presta & Schrader Valves 100 PSI Bicycle Pump for Electric Bike Tire Pump Mini Bike Air Pump Handheld Portable Bike Pump Universal Small High Pressure Ball Needle Accessories

  • 【Fits All Bike’s Tires】This mini bike pump comes with dual valves of Presta & Schrader, all kinds of the bike tire was proper for this bike pump....
  • 【100 PSI & Hose For Inflate Effortlessly】This tire pump for bike has designed with a mini size, but works with the high air pressure up to 100....
  • 【Including Sports Ball Needle】Not only with the dual tire valves, this air pump for bike has including the regular ball needle, for various sports....
  • 【Hanging on Frame】You can hanging the bicycle tire pump on the bike frame steady with the free holder and screws, so never worry about the....
  • 【Package Included】1 x Small Bike Pump, 1 x Bike Frame Holder, 1 x Schrader Valves, 1 x Presta Valves, 1 x Needle for Ball Inflate, 2 x Screws..
Check Stock

Water Filter Float Ball Valve 1/4 Inch Adjustable Float Valve Plastic Water Tank Float Valves for Ponds, Water Pump, Water Trough, Aquariums, Aquaculture, Water Tank, Reservoir (4)

  • Size and material: you can connect float valves to the 1/ 4 inch supply tube, you can install an appropriate number of water float valves according to the size of the water tank to meet your needs in different situations.
  • The ball of the water float valve is made of PE material, the other parts are made of POM material, low temperature resistance and corrosion resistance, durable and non-toxic, can serve you for a long time.
  • Adjustable design: the plastic water tank float valves come with adjustable arms, when the water level of the water tank is low, the gate of the float valve opens to ensure that water can enter, when the water level rises, the ball of the water float valve and the adjustable arm will form a flat angle and close in this state, realizing the automatic adjustment of high water level and low water level.
  • Wide applications: the adjustable sink float valve can be applied for ponds, small water tanks, toilet storage tanks, household water purifiers, pools, aquariums, aquaculture, reservoirs, industrial and large water tanks, etc., if needed, you can choose to use multiple float valves at the same time, so that water can be input faster.
  • Easy to operate: the angle of the valve ball is adjustable, you can flexibly set according to the requir....
Check Stock

Mini Ball Valve 1inch NPT Female Male Thread 316 Stainless Steel Air Liquid Steam Shut-Off Valve

  • MATERIAL: this ball valve is made of 316 stainless stell material for higher corrosion resistance.
  • TWO DIRECTIONS: Inline valve for connecting two pipes going in the same direction.
  • Double-seal system allows flow to go in either direction.
  • WIDE APPLICATION: our steel Ball valves can be widely used in various air, liquid, and steam applications.
  • EASY TO OPERATE: Ball valves is designed with On/ Off switch and quarter-turn easy operation for manual control.
  • CONNECTION: 1 inch standard connections, which makes mini ball valve suitable for most pipes.
Check Stock

6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter

  • Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement.
  • Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting.
  • For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
  • Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
  • Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow.
  • The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance.
  • Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for du....
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock