Reviews Trunnion Mounted Ball Valve

Inertia Gear Wood Splitter - Cast Iron Manual Log Splitter - No Sharp Edges - No More Axes! Safest Way to Cut Firewood

  • 4.5" bore (5" OD) x 24" Stroke 27-30 ton Trunnion Mt Cylinder.
  • Control Valve with Detent in one direction, 25 gpm max flow.
  • Hose and fitting to connect valve and cylinder.
  • OEM Replacement for 918-0769A 718-0769 cylinders and more.
Check Stock

Malida Water Filter Float Ball Valve,or Fish Aquarium  Uses 1/4 Inch Supply Tube.

  • Suitable for Reverse Osmosis System,Fish Aquarium,etc.
  • PVC for corrosion resistance，Top mounted.
  • Float Ball Valve Shut off Uses 1/4" Supply Tube.
  • Tank mount with extended threads on inlet side of valve for mounting through tank wall.
  • PVC Mini Float Valve, Tank Mount, Adjustable Arm.
Check Stock

Febco 3/4 in Bronze Double Check Valve Assembly-3/4 850

  • This 3/4 in. double check valve assembly is designed to prevent the backflow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure in accordance with national plumbing codes and water authority requirements..
  • Its compact modular design facilitates easy maintenance with a single access cover for in-line repairs..
  • The FEBCO Series 850 Double Check Valve Assemblies are designed for non-health hazard applications..
  • This assembly consists of a bronze body construction, NPT end connections, quarter turn ball valve shutoffs, top mounted test cocks, 2 in-line independent positive seating check modules, captured springs, and replaceable check discs and seats..
  • Bronze body for durability, Modular compact design, Replaceable seats and seat discs, Top entry.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

SR SUN RISE 10 Inch Shower System Handheld Showerhead & Rain Shower Combo for Easy Reach 1.8 GPM Shower Faucets Sets Complete Shower Fixtures with Valve and Trim kit, Brushed Nickel

  • ... built-in Shut Off Stops to effectively prevent water hammer noise and control the water pressure. Pressure balance valve's cartridge monitor water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure..
  • Pop-Up Water Diverter: Located on the bottom of the surface mounted, easy-access diverter location. Press to switch between handheld and rain shower. Robust all-brass body ensures long life..
  • Durable Material: The shower head with handheld is constructed from brushed nickel plated ABS material which is non-toxic, durable and lightweight. The adjustable swivel ball joint and stainless steel hose give you a larger shower area..
  • You Will Get: 10 Inch Rain Shower Head(ABS with Brass Ball Joint), 7 Settings Hand Shower(ABS), Rough-in Valve and Trims(Solid Brass), Pop-up Diverter (Solid Brass), Adjustable Slide Bar and Shower Holder (304 SUS, ABS), Shower Arm and Surface Mounted (304 SUS), 71 Inch Shower Hose(304 SUS) and Accessories Required for Installation..
Check Stock

SR SUN RISE Shower System with 3-spray Rain Shower and 6-Setting Handheld Combo 1.8 GPM Shower Faucets Sets Complete with Adjustable 27.6\ Slide Bar Shower Fixtures Valve Include, Matte Black

  • ... built-in Shut Off Stops to effectively prevent water hammer noise and control the water pressure. Pressure balance valve's cartridge monitor water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure..
  • Pop-Up Water Diverter: Located on the bottom of the surface mounted, easy-access diverter location. Press to switch between handheld and rain shower. Robust all-brass body ensures long life..
  • Durable Material: The shower head with handheld is constructed from brushed nickel plated ABS material which is non-toxic, durable and lightweight. The adjustable swivel ball joint and stainless steel hose give you a larger shower area..
  • You Will Get: 10 Inch Rain Shower Head(ABS with Brass Ball Joint), 7 Settings Hand Shower(ABS), Rough-in Valve and Trims(Solid Brass), Pop-up Diverter (Solid Brass), Adjustable Slide Bar and Shower Holder (304 SUS, ABS), Shower Arm and Surface Mounted (304 SUS), 71 Inch Shower Hose(304 SUS) and Accessories Required for Installation..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.
Check Stock

LTWFITTING New Brass Drain Cock 1/4 NPT Air Ride Suspension (Pack of 5)

  • MULTIPURPOSE DRAIN: Can be used on intercoolers, aftercoolers, filters, dryers, wet receiver tanks, drip legs or at multiple points of use.
  • ADJUSTABLE DISCHARGE CYCLES: Open drain cycle of 0.5-10 seconds.
  • DURABLE DESIGN: Features built-in strainer, ball valve, viton seals, brass body, stainless steel internals and 6-foot heavy-duty power cord.
  • EASY INSTALLATION: Installs quickly to existing filters and lines.
  • Allows drain valve to be mounted higher than the 18" mandatory height requirement in automotive shops.
Check Stock

JET JWBS-15 15-Inch Woodworking Bandsaw 1-3/4HP 1Ph 115/230V 714600

  • Toolless Adjustments: Independently adjustable, upper and lower ball bearing guides.
  • Optimum Blade Support: Rigid, four-sided guide post with rack and pinion adjustment.
  • Three Heavy-Duty Tensioning Settings: Full tension, partial tension, and full release.
  • Maximum Support and Stability: Cast iron trunnion and precision-ground cast iron table.
  • Smooth and Easy Adjusments: Cast iron handwheels and ergonomically-designed knobs.
Check Stock

POP SANITARYWARE Shower Only Faucet Set Brushed Nickel, Bathroom Rain Mixer Shower Head Set Wall Mounted Rainfall Shower System Single Handle Shower Trim Kit with Rough-in Valve

  • LUXURY DESIGN: Swivel ball allows you to adjust the angle of the showerhead to suit your preference..
  • ALL METAL MATERIAL: Solid brass rough-in shower valve body, Stainless Steel shower head and brass ceiling mounted shower arm..
  • cUPC CERTIFIED: ASME A112.18.1-2018/CSA B125.1-18 with 1/2" NPT thread on both shower arm and valve body..
  • INCLUDES: 8" Stainless Steel shower head, shower arm, shower mixer valve. California CEC list (1.8GPM 6.8L/MIN). CUPC certification, Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18.
  • LIFETIME LIMITED WARRANTY: Any product quality problem can be guaranteed within 5 years. The shower cartridge is permanently replaced free of charge..
  • IMPORTANT WARNING: Not compatible with other brand‘s shower faucet valve and cartridge. The old shower valve must be removed if install this kit..
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock