Reviews Trunnion Mount Cylinders

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Laguna Tools 110v 1.75hp Bandsaw with 12” Resaw and 38” Table Height - Model mband14bx110-175, Black

  • 12" Resaw | height: 70 1/4" 21 1/2" X 16" | table height: 38".
  • 7Degree table tilt left | 2 x 4" Dust ports | blade length: 115" | cast iron wheels.
  • Magnetic starter | dual light mount | 45Degree table tilt right max. | blade width: 3/4" | pyramid-shaped spine.
  • Min. Blade width: 1/8" | Footprint: 17 1/2" X 22 1/2" | Quick release tension | magnetic blade guard.
  • Laguna Ceramic Guides | Hi/Low aluminum Fence | Worm Gear Rack & Pinion | Massive Cast Trunnion 8"X13".
Check Stock

Dometic SeaStar Seal Kit HS5157 with Wrench

  • Replacement front seal kit for SeaStar pivot / front mount cylinders.
  • HS5157 kit contains: (2) Seal Glands, Pin Wrench, Seal Gland Assembly Guide Tool.
  • Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445,....
Check Stock

Husky Liners Gearbox Storage Systems | Under Seat Storage Box - Black | 09421 | Fits 2019-2022 Dodge Ram 1500 Crew Cab w/o Factory Storage Box 1 Pcs

  • Precision-cut 11 gauge, 304 grade stainless steel mount easily installs on the trailer tongue frame to store weight distribution spring bars when not in use..
  • This frees up storage compartment space, and keeps the greasy parts outside and off the ground..
  • Installs above or below the trailer tongue frame as space permits..
  • 304 grade stainless steel resists corrosion and looks great..
  • Fits round bars, trunnion bars, and Equalizer type square bars. Install with stainless steel, self-drilling fasteners.
Check Stock

Michigan Motorsports LS1 LS3 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 LSX LQ9 LS2 LS3 LS7 Trunnion

  • Includes 16 Trunions, 32 Bushings, 32 Circlips.
  • Fits all OEM LS Rocker Arms. Replacement Trunnion Kit for LS Engines.
  • Micro-polished hardened shafts with C932 bearing bronze bushings.
  • LS1 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 6.2 LSX LQ9 LS2 LS3 LS7 Trunnion.
  • Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

WP9870163 9870163 Power Nut Kit - Compatible Kenmore KitchenAid Whirlpool Trash Compactor Parts - Replaces AP6014316 750668 PS11747554 - Made of Sturdy Materials Upgraded Model

  • WP9870163 Trash Compactor Trunnion Nut - A high-quality exact equivalent for part numbers AP6014316, 9870163, 11100017, 14211376, 41001087, 750668, PS11747554..
  • Compatibility with major brands - 9870163 Trash Compactor Power Nut Kit is compatible with Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Maytag appliances. It fits hundreds of models..
  • Quick DIY repair - WP9870163 Trunnion Power Nut Kit for Ram Drive Screw will help if your compactor ram gets stuck or your appliance is noisy. Wear work gloves to protect your hands during the repair..
  • Attentive support - If you are uncertain about whether the nut fits your trash compactor, we will help. We generally put forth a valiant effort to guarantee you are totally happy with your purchase..
  • High-quality elements - Garbage Compactor Nut Kit meets or exceeds all manufacturer specifications. We provide a 365-day return policy and guarantee 100% money back..
Check Stock

Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve (Natural, 5 LB)

  • Cylinders are made from Luxfer’s exclusive L6X® alloy, a proprietary version of 6061-T6 specially optimized by Luxfer metallurgists to improve its durability, fracture toughness and resistance to tearing and cracking. More than 40 million L6X cylinders in service around the world have an exemplary record for safety and dependability..
  • Highly corrosion-resistant interior and exterior—ideal for wet gases.
  • Cylinders perform well at low temperatures..
  • Lightweight––up to 40 percent lighter than comparable steel cylinders..
  • Cylinders meet or exceed all regulatory standards worldwide..
  • Luxfer’s exclusive “Safety First” training program that provides manuals, inspection guides, safety bulletins, reference materials, shop posters, videos and other training materials free of charge to promote safe use, storage and inspection of aluminum beverage cylinders. Consistent with Luxfer’s position as the world’s leading manufacturer of high-pressure aluminum gas cylinders, educational offerings are available in multiple languages and formats..
  • Cylinders cycle-tested in excess of 100,000 cycles at service pressure..
  • Minimum burst pressure tested to 2.5 times service pressure without failure....
Check Stock

Dometic Baystar Hydraulic Steering Kit, HK4200A-3

  • Gives 5 wheel turns lock-to-lock when using BayStar outboard cylinders.
  • Kit Includes: (1) BayStar helm pump (HH4314-3) (1) BayStar cylinder (HC4645H) (2) Hydraulic steering fluid (HA5430) (1) Filler kit (HA5438).
  • Also includes (1) BayStar tubing kit (HT4420H, 2 x 20' hoses).
  • Dn not use BayStar on smaller HP outboard engines that use wing nut type transom mount clamping screws.
Check Stock

MOSTPLUS 11127522159 Engine Valve Cover w/Gasket Hardware LH Driver Side Compatible for BMW 5 6 7 Series X5 Cylinders 5-8

  • Fitment: Compatible with 2004-05 BMW 545i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 550i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2004-05 BMW 645Ci Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 650i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745Li Driver Side Cylinders #5 - 8 Valve Cover.
  • Package Includes: 1 x Engine Valve Cover Set(.
Check Stock

Motorsport Products 60-1002 MX Engine Stand

  • Can be used with almost all vertical-type single cylinder 2- or 4-stroke motorcycle engines (will not work with lay-down engines/ horizontal cylinders).
  • Frame assembles quickly with no tools needed, breaks down in just seconds for compact storage.
  • Swing frame allows engine to tilt to eight different angles, allowing engine to be at the correct position for any job.
  • Spring-loaded, quick lock pin allows tilt angle to adjust quickly with engine mounted.
  • Engine will mount to either side of the swing frame, allowing access to work on right or left side of the engine.
Check Stock